When I saw the viny sheet, I though - "No, he cannot spray it, it is so not worth it". You have Buddha-like patience and diligence. You have my total respect.

Your videos are pretty awesome! I also enjoy the bit of comedy you throw into them. It's even better that you show the things that go wrong.... great videos, keep them coming.

You’ve got one of my favorite channels! Thanks for another great video!

Finally ! Love your content bro :)

자~ 드디어 다음은 보닛, 루프, 트렁크중에 하나! 가시죠!!~ 항상 잘보고 있습니다!!

정말 손이 많이 가는 작업이네요...여러 가지로 많이 보여달라고 말씀드리기가 힘듭니다...금손 중의 금손...인정합니다

always thought these were fake carbon, great video!

Better than new! Nice work :)

Crazy attention to detail…amazing!

Looks amazing, well done. You must have the patience of a Saint 👍

방심하고 보다가 빵터졌네요. ^^ 결과물은 과히 신품이라고해도 믿을듯요

I could watch this all day

넋놓고 보게되네요

Great job!! I can’t believe you had to cut out those alphabets on the vinyl sheet before spraying. The finished product looks great!

Also look into "electrolysis rust removal" for the metal parts.

Awesome work!

Eco, use "2k spray can" or car clear coat with hardener inside. Those generic spray cans wont last long and you will be redoing the tips again.

@chrisbradley3224

Жыл бұрын

2k is dangerous to spray without full air supply. Aerosol isocyanates are extremely hazardous.

Niiiiiiiice. Great trick with the labeling 👍

I just learned so much thanks👍🏿

Nice work !

Perfect restoration!

Amazing work ! I like yours videos and yours " humur " 👍

I love all ur vids bro :)

집에 없는게 없으시네 ㄷㄷ 대단하십니다

Your hands are golden buddy. I had a great time watching your video :)

Not first but always seing your videos

Very nice 👍

This is a super human craftsman effort. Not for normal DIY person.

Excelent resault my friend!

Awesome job, where did you get the vinyl stickers?

영상 좀 많이 올려주세요 너무 잘 보고 있습니다

안녕하세요 동영상 잘봤습니다 감사합니다! 혹시 마지막에 사용하신 스프레이 제품 정보 알 수 있을까요? 감사합니다!

볼때마다 멋지네요 ㅎ

Good job ! 🇨🇵👍

왠지 내꺼니깐 하는거지 남의것이였음 이리 공들여하긴 힘들어보이는 다이라 느껴집니다 고생하셨습니다

Non de plume priceless nice one

yuppi! new video.... 👍

스티커 알리산인가요ㅋㅋㅋ

You are a master! How can I remove a titanium exhaust pipe carbon fiber end cap that is stuck? I have removed the retaining screws and I know it can come off, any tips for loosening or tapping free?

Next time use lemon/citrone juice to remove rust. No scrubbing etc. BTW. I love watching your films. Hope to do few projects with my BMW. Great job.

Hello, would it be possible to just sand, apply the stickers and then paint with 2k clear ? Or do i need to use the resin first ?

Do u know how to readjust carbon part with inner steel part?

Would this work on Remus Axleback CF Tips as well?

I need those vinyl templates!

깔끔하네요

같은 한국인(?) 이신것 같아 멀리 화이팅 메시지 전합니다!!

PERFECTO

Terbaik pokoknya 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

something like that yes!!! Super !!!! yes yes yes!!! I can do this with my ducati 848 Evo termignoni carbon ??

next time you can try using water-slide-decal For mini logo and word. It always work perfect

@ECOLAPStudio

2 жыл бұрын

Hello friend. Water slide decals are sensitive to heat. And My printer cannot print white.

지..지렸다.. 일반 머플러 브라켓부분빼고 절단하고 카본으로 만들어도 될까유..?

@ECOLAPStudio

2 жыл бұрын

안녕하세요. 브라켓 부분을 뺀다는 것이 어떤 의미인지는 모르겠으나.. 아크라포빅 카본팁의 경우 카본으로 전해지는 열을 최소화하기 위해서 카본 안쪽에 브라켓들이 있습니다. 그렇기 때문에 리벳부분만 카본과 맞닿아 직접적으로 열이 전달되고 다른 부분은 금속 부분과 닿고 있지 않습니다. 아무래도 HIGH TG 에폭시 수지를 사용한다고 하더라도 에폭시 수지가 열에는 취약하기 때문에 그 부분은 신경써서 만들어야할 것입니다.

항상 영상 잘보고있습니다 저도 같은 고민중이였는데 영상이 올라왔네요 신기합니당ㅎㅎㅎㅎ 제꺼는 아크라가 아닌 레무스인데 카본팁이 신경 안 쓴사이에 스톤칩이 난거마냥 클리어? 로 유추되는 부분이 부분 부분 까져있더라구요 컴파운드나 페인트 클렌저로는 어림도 없는거보니 맞는거같은데 샌딩작업 후 에폭시를 다시 올리는게 좋을까요?? 아니면 내열클리어를 올리는게 좋을까요??

@ECOLAPStudio

2 жыл бұрын

안녕하세요. 스톤칩은 폴리싱으로는 없어질 수가 없습니다. 일단 샌딩 전체를 하시고, 샌딩 후에 면이 잘 잡혀 있다면 내열클리어를 올리시고 면이 제대로 잡혀있지 않다면 내열 에폭시 레진 도포 후 샌딩으로 표면을 잡고 내열 클리어를 올리시면 좋을 거 같습니다.

@ihjo5652

2 жыл бұрын

@@ECOLAPStudio 알림이안떠 지금봤네요 답변감사합니다!

Why this always remind me about some cooking channel always throw away ( flew everywhere at high sky ) after using the appliances.

Why not leave the resin/hardner after curing and then clear coat afterwards? It seems it looks a lot better Before sanding.

Please make another helmet, it's satisfying to watch

신기하구만요

Просто красавчик!

Very good job! Is there a sandable epoxy resin or all the epoxy are easy to sand?

@ECOLAPStudio

2 жыл бұрын

Hello friend. All epoxy resins can be sanded easily.

@wtfftw24

2 жыл бұрын

@@ECOLAPStudio thank you!

The tips get very hot, did you use a high temp epoxy? How are they holding up today since you did this?

@ECOLAPStudio

2 жыл бұрын

Hello friend. I used High TG Epoxy Resin, as described in the video. My tips are no problem.

Can you tell us how to produce them from the beginning, I think can you tell us how to produce it from scratch?.

I don't understand how to use the epoxy resin and harderner. What is the corret mix of them? Thank you in advance for the answer.

@ECOLAPStudio

2 жыл бұрын

Hello friend. If you buy an epoxy resin & hardener, the mix ratio will be marked.

Congratulations, another faithful subscriber. Very well done video. Do you mind doing something more complex in carbon fiber like the front bumper of a motorcycle? You're encouraging me to get into the carbon fiber world. Thanks for posting.

So you first put a layer of gloss clear and then on top matte clearcoat ?

@ECOLAPStudio

2 жыл бұрын

Hello friend. That's right. I applied a matte spray over a glossy surface. I tried to make a semi-matte topcoat surface. That attempt was able to produce good results.

@lungtamik

2 жыл бұрын

@@ECOLAPStudio Hello so you basically wanted to have a satin finish ;-)

안녕하세요 인스타 디엠보내셧는데 답이없으셔서;; 저도 똑같은 문제를 격고있어서 에코랩님처럼 리페어를 해보려고하는데 스티커글자부분 오려내서 도색하는 저스티커는 어디서 제작을 해야하는건가 해서 여쭤봅니다~

What vinyl cutter have you used?

@ECOLAPStudio

2 жыл бұрын

Hello friend. I don't have a vinyl cutter. I asked my friend to cut the vinyl and got it. My friend runs a sticker shop.

Where can I buy the clear for high temperature, I can't find where to buy it, can you provide me with a purchase link thanks ^.^

@Dame102988

2 жыл бұрын

He’s in South Korea

@ECOLAPStudio

2 жыл бұрын

Hello Friend. The sprays I use are Dupli high temperature resistant spray. I think you can buy them in your country too.

You need way more views way more subs and some more vids lol

Use dry ice for cleaning

next DIY carbon fiber wheels

Nak tiru gaya mat salleh..

Do you let them cool in-between temperatures in the oven?

@ECOLAPStudio

2 жыл бұрын

Hello friend. I didn't cool down between 50, 100 and 150 degrees Celsius. I post-cured at 50, 100 and 150 degrees for 9 hours in a row. Post-curing temperature is different for each epoxy resin. You should refer to the manufacturer's datasheet.

@rawrtravisrawr

2 жыл бұрын

@@ECOLAPStudio what is purpose of curing? have noticed you don't normally do in other videos

녹제거를 문데는건 첨보네염

NEXT : CARBON FIBER KZread PLAY BUTTON

형 유튜브 수익금으로 작업실 공기청정기 한대씩 늘려가는거.. 비밀로 안해도되요…

First!

6:20 솔직히 욕이 목구멍 앞까지 나오셨죠?

It looks great, too bad it can't be seen in the car...

Spray paint usually melts the vynil..

@ECOLAPStudio

2 жыл бұрын

Hello friend My guess is that lacquer melts the vinyl. The spray I used is an acrylic heat resistant spray. The vinyl was not damaged at all.

Вид имеет:)

Do you ever mess up and ruin something?

Insanity in its finest!

Facepalm....as soon as the heat transfer paper came out! Performance cars exhausts heat can run 500°c + Temps. Not to mention it was never gonna transfer evenly on a roughed surface...not with those fine details anyway.

Send me one xD

I'll prefer buy 4 new ones for $50

스티컼ㅋㅋㅋㅋㅋㅋㅋ

Sponsored by: wet wipes