Please share any questions you may have. Myself or others would be happy to help you. Apologies for the lack of action footage. Equipment malfunctions occurred during this project. Check out our Channel page for more How-To Videos and Homestead content. Thank you!

@caxxie1

2 жыл бұрын

I noticed you have dogs. Do you know if there are any dangers with the products used being washed off into the grass? Did you prevent your dogs from going into the yard for a while? Thank you!

@Aprons.Overalls

2 жыл бұрын

@@caxxie1 No issues with our dogs other than their nails putting minor scratches into the deck wood! The product had good ratings as far as not damaging nearby plant life. Any of the runoff is so heavily diluted by the amount of water required to rinse the product off. If anything, I'd just make sure your pets don't drink any water that pools from run-off, but otherwise I'd think you'd be just fine, Sabrina.

@caxxie1

2 жыл бұрын

@@Aprons.Overalls Thanks for replying!

@Aprons.Overalls

2 жыл бұрын

No problem. Good luck with your project!

@nunyabisnis1448

Жыл бұрын

What is in the booster and did you think it was a must have or can you get away with out using it ? Strangely enough the home owner bought this product before I sent them your video and they sent me a pic.of the product they want to use and all be damned if it's not your sponsor and if they are not sponsoring you they should be or at least giving you a coupon code for a discount, anyway if the booster is needed I'll have to contact them to find out what it is, so as I can compleat this task tomorrow !

Very thorough overview. What would have been helpful was some POV video of actual techniques (sanding, prep coats, staining) just as a sanity check for non-expert DIY watchers. You explained what you were going to do, then cut to the finished product, without filming the “doing” part (except for a couple pressure washer clips). Still very helpful, but just a suggestion for future content.

@Aprons.Overalls

2 жыл бұрын

Thank you for the feedback. My tripod bit the dust during this project and working alone, I wasn't able to film a lot of the action.

@leannamac84

3 ай бұрын

He ain't want y'all to see them Mexicans knock that job out when it turned out to be a damn job and a half. No offense to the Mexicans either, I work right beside em and learn a lot.

Looks awesome! I’m so glad that I found your video.

Looks great! doing mine this weekend! Thanks for the great video!

Turns out I watch this video every year!

@Aprons.Overalls

Жыл бұрын

Welcome back!

Very informative. Starting my deck tomorrow. It's a 21 year old deck in the same condition as this video. Ironically I by happen ordered Restore-A-Deck Stripper and Brightener because of the great reviews, however didn't know they sold the Stain. I messaged the company and they said it was okay to use any Stain with their products except Ready Seal Sealer/Stain. Anyway great video my friend. I really needed this because my deck is as large as this one. Thanks a lot

as a first time home buyer, these videos are life savings! thank you technology and your video XD

You did an amazing job!! Love the colour and all the work you did! Beautiful

@Aprons.Overalls

Жыл бұрын

Thank you!

Thank you for such a great overview of your project. I also appreciate your patience with knuckleheads in the comments sections.

Very helpful video. Thanks!

Looks very good. I prefer latex stain which goes in deep and fills in all cracks to make it look almost new again. My deck is 22 years old and that is how I maintain it.

Dude thats amazing. Good job!

Getting ready to do mine thanks for the vid

Amazing job! Going thru this right now with a 20 year old deck that had a red solid stain on (previous owner applied). Had a local guy pressure wash and he did a terrible job removing old stain claiming it was the best he could do. He rushed thru to get to the next job. And his Ready Seal stain samples soak right in to the older wood. Not going to use him for staining. Looking at this Restore a deck now. Your color is exactly what we want. Thanks. Very helpful

@Aprons.Overalls

4 жыл бұрын

So sorry to hear about your poor contractor experience. I too was told that stripping old stain isn't an option, until I found the Restore-A-Deck product. It's not magic, it certainly requires some elbow grease and careful planning, but it can be done. This project was my first experience with any type of deck maintenance. If I can do it, anyone can. Future maintenance is also much easier than staining a neglected deck. Applying a top coat of the same stain every 2-3 years will make maintenance much simpler than full restoration. Good luck on your project!

@mcalislr

4 жыл бұрын

I just pressure washed my deck yesterday, 20 some years old with old stain and the stain wasn't even all that thick. I don't know what yours looked like afterward, but ours was very hard to get the stain off, most did not come off and we had it as high as the pressure would go without damage to the wood.

This was very informative and helpful. Our deck is about the same age and looking the same way, so I've been on the fence about having it completely rebuilt or just trying to restore it and get a few more years out of. This video has encouraged me to go ahead and restore it and make that a project. Thank you!!

@maithem212

3 ай бұрын

How did the restoration project go? I'm in the same boat, 2 years later

One of, if not the best explained youtube video presentation I have seen. Clear, no stutter, straight and to the point and task. Very well done - Can now do an excellent job on my deck.

@Aprons.Overalls

3 жыл бұрын

Thanks, Bob! You made my day. =]

@corneliusharrisoniii964

2 жыл бұрын

I totally agree Bob

Dang you did great!! This was an excellent video!! Thank you.

@Aprons.Overalls

9 ай бұрын

Thank you! 😇

Cool Video, deck turned out beautiful.

@Aprons.Overalls

4 жыл бұрын

Thank you! I hope it helped.

I'm a licensed contractor in Northern California. Great use of terminology, makes it easier to understand how to follow the procedures. I have a very similar deck, at my house, that needs restoration. Thanks for the video.

@Aprons.Overalls

3 жыл бұрын

Glad it was helpful!

@nunyabisnis1448

Жыл бұрын

Do you know if the deck cleaning system is something I can go get at lows or HD Or must I order it from the company ? Thanks

@Aprons.Overalls

Жыл бұрын

You have to order from the Restore-A-Deck website. They also sell on Amazon. I have links to their products in the description.

That was dam good job you did👍🏾

This is great! So thorough. Thank you!

@Aprons.Overalls

Жыл бұрын

You're welcome!

This video helped me out a lot with my deck that was in the same condition.

@Aprons.Overalls

Жыл бұрын

Thank you, Stan! Makes my day reading comments like this. Glad you got some help.

The deck looks REALLY good .....

Looks great!

Great video, thanks!

@Aprons.Overalls

2 жыл бұрын

Good luck with your project! 😀

Looks good

Great video!

Beautiful!

I loooove your view!!

Nice job

Amazing great 👍 job thanks

you did a very thorough job. i'll be doing something similar but probably with less tediousness. i understand that i won't get your results, but that's ok. nice work

@Aprons.Overalls

3 жыл бұрын

Thank you. Not every deck would require this much effort. Virtually all stain jobs look the same upon completion. Typically, the more prep work you do the longer it will last though. Your deck may be in better shape or not have old stain that needs removed first. Do what makes sense for your individual situation. Good luck with your project!

Great job.

@Aprons.Overalls

Жыл бұрын

Thank you, Matthew!

good job!!

And did you use both additives for the stripper the gel and booster?

Looks great! I find no matter what you do the stain only lasts maybe 2 years on the flat surfaces,railings lasts longer.

@bobkucharski9425

Жыл бұрын

same issue

Fantastic video. How did you clean everything again after you used the fillers/caulk and sanded it?

Excellent!!

Nice!!!

So about 10 days to complete, got it!

Great video. I would have liked to see all the tools you used.

@Aprons.Overalls

2 жыл бұрын

Thank you, Krys! Unfortunately I rushed this video and my tripod broke early in filming so I wasn't able to capture all the footage I would have liked. Good luck with your project!

Great video! Could you share what caulk you use to fill the boards that were crack?

@Aprons.Overalls

Жыл бұрын

Thank you, Lisa! I just got some caulk that was crack and mildew resistant. Also looked for caulk that was stainable or paintable. You can also just look for colored caulk that is close to your deck color. Good luck with your project!

This is a great video, thanks! I’m trying to restore a very old and weathered wooden bench. I’m sure it has a lot of water damage, it’s been outside in Utah weather for almost 15 to 20 years. Any advice on the best way to restore it? Im very new to this, so any advice, no matter how simple, would be really appreciated. Thank you!

@Aprons.Overalls

2 жыл бұрын

Thank you! I would think the same principles that I applied to the deck would apply to your bench. If possible, give it a good power wash, being careful not to damage the wood. After it dries, give it a thorough sanding. Fix any damaged boards by caulking or replacing, then apply your stain or paint. Good luck!

We want to restore our deck too! The previous owners did a quick paint job to sell the house, turns out they did a terrible job and it’s peeling up like crazy. We want to get the paint off and then restore it like this. Any tips there?

The brightener sounds like basic bleach to me, which will in fact brighten wood. My last time I refinished a deck I went another route. After I steam cleaned everything, I ground down a 3/4" rebars to fit the heads of 16 penny nails that were used to build it. Then I went down to the hardware and returned with two hard working laborers. Giving each cheap protective gear and cheap knee pads and two gauges that I used to checked the depth of each nail head, they would have to be sunk 3/16" from the surface of the board. Some were, most weren't. So the guys loved the rods I made making it easy to use. They ended up teaming up and using my shop hammer (2.5lbs) they were sinking the nails in one swing. In 3 hours there were done. Then I gave one guy a Harbor Freight multi tool and a box of 80 grit diamond pads to sand between the rails and balusters, and the palm sander to complement it. And I would take the big belt driven sander and bring it to bare wood in just a few passes. Then I air blasted the deck again and using epoxy, we were combing the epoxy down into the cracks and torching the bubbles. Those guys left at about 3pm with $100 each and returned the next morning and began sanding sanding again, until wood. Didn't take much more than an hour. Then I air blasted it clean and then with both of those guys standing by with extinguishers, I burnt my deck. Then I sealed it with Thompson's water based stain. But I would have to re treat it every two years.

What brand - do you remember. Walnut is quite dark as the wood. But I liked your choice. Thank you.

My problem is the old wood spindles . Mine are old and have lots of mold . Any suggestions ?

Where do I get the Stripper from? Sounds entertaining! 👍

Can you use the same method with treated wood ( lumanized) or how ever its spelled

Did you apply the stripper via the pressure washer?

it looks great how much something like that cost ?

You did a great job!! Beautiful! How long did the whole process take?

@Aprons.Overalls

8 ай бұрын

Thank you. It took me a few weekends as I was working alone and was allowing for extra drying time. You could complete this in a long weekend if you have some help. It'll also go much faster if you don't need to strip a previously applied stain. Good luck!

@SilverGorilla1776

8 ай бұрын

@@Aprons.Overalls Thanks for responding. I have a 22 year old deck that has never been stained. It’s really dirty and needs some repairs. Was thinking about replacing till I saw your vid. Think I’ll try the product you used. If it does as well as it did on yours I’ll be very pleased. Thanks again.

Great video! We are wondering how durable the stain has been after this length of time. We are in the process of removing the previous product from our deck before applying new stain. So far we have worked for a month on our 32 year old deck in preparation for staining, so we want a quality product that lasts. Thanks in advance for any tips you have.

@Aprons.Overalls

3 жыл бұрын

Great job on your prep work - that's nearly as important than the stain itself! I moved about 14 months after completing this project. We have dogs with sharp nails. They run full speed on the deck and I notice small scratches on the stain surface just outside the door. There was some light fading in spots the following summer. It wasn't bad but certainly not as perfect after a year. Decks really need re-stained every 2-4 years if you want a great look. If you stain regularly, it won't be as big of a project as a neglected deck. I'm planning a new deck staining video later this summer. Good luck with your project!

Thanks for uploading. Good job! This deck's condition is pretty similar to mine. I can smell strong odor from the crack of the deck which really bothers me a lot. I guess it's caused by fungi. One question, there are leaves and debris keep falling onto our deck from trees in my neighbour's backyard, which I cannot control. would the stain be ok during the second application if there are debris and leaves staying on it since I cannot keep sweeping them off for 8 hours especially on a stain-curing deck. Thanks!

@Aprons.Overalls

3 жыл бұрын

Thank you. When you are going to stain a deck, planning around the weather is crucial. Spring would seem ideal because of the cool temps but all that rain and wind are bad news. The deck in this video was under a very large and messy tree. I don't know your exact situation, but most likely in the middle of the summer on a calm day would be your best bet where leaves won't be falling. Rigging up a tarp of some sort to give you some temporary protection might also be a good idea. Regardless, after you stain, try to keep the deck as clean as possible. The debris on the deck holds water and leads to staining and mildew. These are the situations that they never explain in the "Stain a deck in just 1 day" type videos. There are a lot of variables to consider. Good luck!

@helix7564

3 жыл бұрын

@@Aprons.Overalls wow. Thanks for your tips! I will have to make a good plan to get everything ready. You also remind me that I should sweep it more often. Thanks 🙏

Beautiful job was wondering what color you chose for stain I'm in the process of doing mine nw

@Aprons.Overalls

3 жыл бұрын

I used the Light Walnut stain color.

@jonjon34ful

2 жыл бұрын

@@Aprons.Overalls how is it a year later?

@Aprons.Overalls

2 жыл бұрын

@@jonjon34ful it held up well. Like any stain, they all begin to fade but not to a level that it has to be restained. I try to put on a fresh coat of stain every 2-3 years. Then you don't have to strip stain and it makes the process faster than a full restoration.

What brand caulking did you use?

Great results!!! What stain and transparency did you use? It looks just exactly like the one on my deck but don't know what color was used.

@Aprons.Overalls

4 жыл бұрын

Thank you! It's a semi-transparent stain from Restore-A-Deck. The color is Light Walnut.

@Danny-ju2ip

3 жыл бұрын

How is it holding up year later?

Thank Youfor sharing. I'm looking to have my deck done. Any recommendations I live in GA?

@Aprons.Overalls

4 жыл бұрын

Do some research and avoid using cheap materials if you can. Spending more money does not guarantee you are getting a quality product. If you are hiring somebody to do the work, make sure they know what they are doing and get multiple quotes. The preparation is the most crucial part of the process. Any deck can look good shortly after staining. Proper preparation leads to the deck looking better longer. Good luck!

@MrRoderickpeart

3 жыл бұрын

What part of GA are you in

@l.angelhayes133

3 жыл бұрын

Dallas

Great job. Where can i buy the material ?

Looks great! How long did this take you? Was it just you or did you have help?

@Aprons.Overalls

4 жыл бұрын

Thank you. I completed this project solo. There are many videos online of how to restore a deck within a single day. I found those videos to be mostly click-bait. If you had a large crew, and began at 6 AM and worked in perfect weather, maybe it would be possible. When using more than just stain, such as the stain stripper, brightener, etc. they can require that the deck dry before moving to the next step. Due to weather and working alone, I performed all my preparation one weekend, and did the stain the following weekend. This was a large deck with stairs. A simpler deck may allow you to move quicker. I would say if you had ideal weather and an assistant, you could complete something like this in one weekend. Good luck! Let me know if you have other questions.

Just was wondering I noticed you had grass and other trees around it harm the grass of the trees I have a lot of hostas underneath my deck and I really don't want to lose them I was wondering if the stripper harmed anything also you being that close to the water with runoff is it okay to be by ponds and lakes I have a small pond in the back that does have fish?

@Aprons.Overalls

Жыл бұрын

The product is fairly eco-friendly. Not 100% but also not insanely toxic. I also have hostas underneath the deck and runoff from the chemicals did not harm any of the plants. I sprayed all the plants with water when I was done just to be sure. As far as the pond, it does have fish and everyone on the pond uses fertilizers on their lawns. That is probably more toxic than the deck chemicals are. I think you'll be just fine. Good luck with your project!

Does the restore-a-deck stain stripper work on old paint? If not, is there another product you would recommend for old, painted wood?

@Aprons.Overalls

4 жыл бұрын

According to the manufacturer, the Restore-A-Deck Stripper will not work on paint or solid stains. You could carefully use a power washer, sand it off, or you can use a chemical stripper. Avoid products containing methylene chloride. Although these work fast, they are extremely powerful and should only be used by professionals. The least toxic strippers to use are limonene-based strippers. Good luck!

When do you use stain versus oil

Hi did you use pressured sprayer for applying stripper? And what tool did you use for applying stain on deck floor?

@Aprons.Overalls

4 жыл бұрын

I used a pump sprayer to apply the stripper to all of the deck surfaces prior to hand scrubbing them. For applying the stain to the deck itself, I decided to use a large sponge that could be attached to a pole. It was contoured so that it would reach between each board. You can find these at your local hardware store. I hope this helps!

@aryehwise3379

4 жыл бұрын

Pro Moves Can you maybe share a link for the sponge?

I was wondering if you watered the deck before you applied the brighter? I'm not sure if that is necessary or if only needed on hot sunny days?

@Aprons.Overalls

4 жыл бұрын

I did not wet it first. Applied a healthy amount from my pump sprayer after mixing.

How long do you ley deck dry?

What type of caulk did you use?

Looks Amazing!!! What was the color of stain/brand you used?

@Aprons.Overalls

3 жыл бұрын

Thank you! I used the Light Walnut stain color.

Quick question: What about underneath the deck? do you restore underneath the deck to protect from weather as well?

@Aprons.Overalls

3 жыл бұрын

Apologies for the late reply. There is no need to stain the underside. Surfaces with standing water are the most important to protect. Good luck!

How can you tell or test if it has been sealed in the past? Great video!

@Aprons.Overalls

Жыл бұрын

Thank you! I like using the stripping product to remove the old stain if the new stain I'm applying isn't the same color. Any kind of deck sealing material only lasts a season or two so if it looks like it's ready to be stained again I wouldn't worry so much about trying to remove a sealer. Good luck with your project!

Hello thank you for sharing how to do this, but what type of stain did you use,was it a solid or semi-transparent and what color???

@Aprons.Overalls

8 ай бұрын

You are welcome. We used a semi- transparent stain. Color is Light Walnut. There are links in the video description.

@ladydee191

8 ай бұрын

@@Aprons.Overalls I didn't even think to look for links, thank you.

What color of the stains are you using

I never saw a stripper pull off the old stain from the deck. You got my hopes up.

@Aprons.Overalls

4 жыл бұрын

Neither had I. It still requires some manual effort with scrubbing after the stripper is applied. If you follow the manufacturer's instructions exactly, it works like a dream. Good luck!

@gregterkanian5158

4 жыл бұрын

My experience thus far has been that the stripper really does nothing. The power washer just rips all the stain off on its own.

@pi1810

4 жыл бұрын

lol … it's her "day job".

The tip you were using is called a Turbo Nozzle. It is primarily used to blast gunk off of stone and concrete. Never use one on wood. Ever. You were fortunate that your machine has very little power, but even so, a turbo Nozzle can destroy your wood.

We just bought a place w/ a similar deck. This looks great, but seems like a LOT of work. Ballpark, how long did this take you?

@Aprons.Overalls

11 ай бұрын

It's not as much work as I made it out to be. If your deck doesn't have existing stain on it, it can be done in a weekend or 2. Good luck!

Could you use this same technique and stripping product to remove painted wood on a deck?

@Aprons.Overalls

3 жыл бұрын

I don't believe the product that I used to strip the stain is mean to strip paint. Depending on the shape of the deck, you might be able to power wash the paint off if it's chipping off already. You'd need to use a paint thinner to get the paint off. Good luck!

What caulk and wood filler did you use? And also - how did they hold up?

@Aprons.Overalls

2 жыл бұрын

Held up well. Just looked for fade, Crack, weather resistant. Also made sure they were paintable/stainable or if not, pick a color close to your stain.

beautiful! PLEASE I HOPE YOU SEE THIS.. WHAT COLOR IS THIS. THIS IS THE COLOR I WANT

I redecked a 20 year old deck, should I sister the joists to improve the frame?

@Aprons.Overalls

4 жыл бұрын

It depends on your individual situation. Whatever additional preparation work you complete will go a long way in lengthening the life of the deck and reducing future maintenance. I opted not to replace some of the older boards on the deck. The next time I stain, I'll need to replace some.

Hi there, I have a 20yr deck that was painted by the previous owner. I want my deck to look like yours. To remove the paint, I decided to by a diamabrush to remove the paint coat. What shouldbI do next after the paint os gone?

@Aprons.Overalls

Жыл бұрын

After the paint is removed, I would still go through the same process I went through to clean and prepare the wood for stain.

Do you recommend using Calk like you did or...wood filler??

@Aprons.Overalls

Жыл бұрын

I chose to use caulk as most wood fillers were more susceptible to cracking. I looked for an outdoor rated caulk that was close in color to my stain color. You could use an outdoor rated wood filler but I would look for one that is crack resistant, stainable or at least close in color to your chosen stain.

What color stain did you use? it's lovely.

@Aprons.Overalls

3 жыл бұрын

The stain is semi-transparent and it is their "Light Walnut" color.

@myspcm101

3 жыл бұрын

@@Aprons.Overalls Ah, thank you, I though maybe that was the one. I am following along and rehabbing my own 30 year old deck. Fingers crossed!

How is the cost by square foot?

What is the material of the deck? Pine? What is stain and color? Very informative!

@Aprons.Overalls

2 жыл бұрын

Thank you! Yes, I believe the deck is pine and we chose the Light Walnut stain color. Thank you for watching! 😄

I saw what you used to clean it, but what brand of actual stain did you use? Was this semi transparent or a transparent stain. Also was it an oil stain or water stain? And I saw it was in light walnut right?

@Aprons.Overalls

4 жыл бұрын

The stain stripper, brightener and stain where all the "Restore-A-Deck" brand. The stain is semi-transparent and it is their "Light Walnut" color. The stain is water-based. www.restore-a-deck.com/

@jamesjoslin7586

11 ай бұрын

“Semi transparent “ wont last.

What kind of caulking did you use?

@Aprons.Overalls

4 жыл бұрын

There were so many options to choose from. I ended up getting one that is water proof, mildew resistant, crack resistant and paint-able. I matched the color pretty close to the stain. I'd recommend instead getting a caulk that is stain-able so you don't have to worry about the color match. Just make sure it meets your needs for being an outdoor caulk. Good luck!

Restores the deck SURFACE. Bad joists, rusted nails, screws, dryrot, warping are other issues which must also be addressed prior to surface finishing.

@escapetherace1943

3 жыл бұрын

no really? it doesn't replace screws and stuff I didn't know, thanks

After I used the water pressure to wash it of . Do I have To sand it?

@Aprons.Overalls

9 ай бұрын

You can, but not required

@jacksonvang2946

9 ай бұрын

@@Aprons.Overalls thank you best video

I just wanted to confirm, did you also SAND the deck and then do two coats of stain, or did you forego sanding and then two coats? I am getting mixed messaging on my choices about sanding and how many coats. Thanks!

@Aprons.Overalls

3 жыл бұрын

I sanded the deck using a pole sander. The only reason for doing so on an older deck is that sometimes power washing, even at low PSI, can rough the boards up a bit. It's a cheap/quick/easy step. Going all out would be using a belt sander, which probably has the best results, but is a costly investment if you don't have one. I used some fine grit sandpaper for all of the spindles.

@myspcm101

3 жыл бұрын

@@Aprons.Overalls thank you -- I've been doing the railings with a palm sander, and there are some rough spots from powerwashing and wood filler I'd like to touch up so might be better off renting something to get it done faster. The restore-a-deck folks suggested that if I sand the deck, I should only use one coat of stain, but you did two coats with no problems it seems.

@noradurst5317

2 жыл бұрын

@@myspcm101 found your comment and it was very useful as I begin this process, thank you! How did your deck turn out? I’ve read conflicting opinions about sanding, some say it lessens the effectiveness of the stain so I’m torn.

Did not catch it what stain and brand did you use looks good

@Aprons.Overalls

Жыл бұрын

It is a semi-transparent stain from Restore-A-Deck. The color is Light Walnut. I have links to the products in the video description. Good luck!

@booostedtc

Жыл бұрын

@@Aprons.Overalls that's pressure treated wood right ?

@Aprons.Overalls

Жыл бұрын

@@booostedtc Correct. :)

What caulking and wood filler did you use?

@Aprons.Overalls

2 жыл бұрын

I looked for brands that were cracking, fade and weather resistant. You can try to find something that either matches the color of your stain or is stainable/paintable.

Please, indicate what brand and color you used. Thank you.

@Aprons.Overalls

Жыл бұрын

It's a semi-transparent stain from Restore-A-Deck. The color is Light Walnut. Good luck with your project, Darcy.

@darcythornborrow4996

Жыл бұрын

Thank you. Onward!!!

I am planning on restoring my deck. It was not properly treated the first time around and it is sliptering in many areas. 2 questions. What the days or week process for this (how long did it take from start to finish) and what would you suggest for slipt areas? Your deck look so amazing btw.

@Aprons.Overalls

4 жыл бұрын

Thank you! I worked mostly alone, so I split these steps across 3 weekends. It could easily be done in 2 weekends or even a single weekend if you have some assistance, depending in your deck size. I had splintering as well. I pulled some of the large, loose pieces and caulked large gaps. I did light sanding on some of the rough patches. For really bad boards, its best to replace them. The next time I work on my deck, I plan to replace my most worn boards. Preparation is crucial for a successful outcome. Take your time. Some DIYers like to brag about how quickly they completed a task. Quality is important! Applying the actual stain should be the easiest step. Good luck!

@jaggergege7791

4 жыл бұрын

@@Aprons.Overalls Thank you so much for the advice and taking the time to answer. I will do that, plan and take some time to really treat the deck. I want to do it right thw firat time and i may have to replace a couple of boards. Planning on starting this project soon. No assistance just me and the birds watching me..lol. I'll throw an update soon. 😊

I believe that the stripper is sodium hydroxide (lye) & the brightener is sodium percarbonate (oxygen bleach)

@billwilson3665

4 жыл бұрын

I love how they try to keep the ingredients a secret.

How about underneath? Did you paint that as well ?

@Aprons.Overalls

2 жыл бұрын

No, there is no need to since the bottom side of the boards don't ever have standing water on them or exposure to sunlight.

how much something like this would cost to get done professionally?

Please let me know- the name of the stain color you used

@Aprons.Overalls

4 жыл бұрын

I used the Light Walnut stain color.

@Aprons.Overalls

4 жыл бұрын

Brand is Restore-A-Deck. All materials used in this video are from their website.

Hey, how has the deck held up so far? Can you update us? Thank you!

@Aprons.Overalls

4 жыл бұрын

I'll try to get a video posted showing it here 8 months later. It has held up well. I get direct sunlight on it all day, year round. The stain has faded some right outside of the door leading to the deck. This is due to my dogs who take off at full speed when we let them outside and their nails dig into the wood. This was a problem before tge restoration as well. I'm planning to apply a quick touch-up to correct this. All other areas of the deck have held up great. I'll try to get an updated video soon so you have a visual. I don't believe the fading is due to the stain.

@stollay

4 жыл бұрын

@@Aprons.Overalls I'm considering grabbing the solid stain. Looking for a lower maintenance solution. Looking forward to the video. Thank you!

@AndYetHereWeAre

3 жыл бұрын

@@stollay DO NOT USE SOLID STAIN. Your ease of maintenance is going to turn into having to sand the deck to remove solid stain. You can reapply oil based stain. If solid starts chipping and peeling, which it will, you can't just put more on it. Enjoy your $5000 deck refinishing job for a 20x20 deck.

What was the color code of the stain you used?

@Aprons.Overalls

3 жыл бұрын

It's a semi-transparent stain from Restore-A-Deck. The color is Light Walnut.

Where are you located