How to Resize / Adjust a Watch Band
Тәжірибелік нұсқаулар және стиль
Learn how to adjust a metal / silver / gold watch band or how to resize a watch. Need to make that watch band a little smaller? This video shows two ways to do so.
#resizewatchband #watchtoobig #diy
📦 PRODUCTS IN THIS VIDEO 📦
• Watchand Link Remover Tool (Paid Amazon Link): geni.us/ZCRzy
• Blue Invicta Watch (Paid Amazon Link): geni.us/UnKm
Links above are affiliate links, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
🔗 VIEW THE ARTICLE ONLINE 🔗
• Check out our step by step instructions for this topic at lrn2diy.com/how-to-resize-a-w...
🎬 CHECK OUT SOME OF OUR OTHER VIDEOS! 🎬
• How to Recharge Your Car's A/C in 30 Minutes: • Recharge Your Car's Ai...
• How to Hide Your TV Wires in 30 Minutes: • How To Hide Your TV Wi...
• $23 DIY Planter Box: • $23 DIY Planter Box
👕 LRN2DIY SHIRTS, HOODIES & MORE 👚
lrn2diy-merch.creator-spring.com
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📲 MORE DIY GOODNESS 📲
Check out our many projects and plans at
lrn2diy.com
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q
00:00 Intro
00:29 Method 1 - Tools from Around the House
03:43 Method 2 - Watch Link Remover Tool
05:59 Conclusion
Пікірлер: 1 600
Whoever invented KZread, God bless you. You gave a solution to everything
@FirstnameLastname-yb1fd
3 жыл бұрын
School: *cough cough*
@rocky-zx6kq
3 жыл бұрын
@@FirstnameLastname-yb1fd school:do you want us to teach you how fast can a arrow fly by using a graph but you can't use it on your life Kids:No School:I don't care and here is the useless complicated quadratic equation to solve it.
@gimimini7724
3 жыл бұрын
Every fucking thing was answered HAHAHAHAHAHHAAHAHAHAHAHAHHAA
@gimimini7724
3 жыл бұрын
@Kirei Works you sure about that?
@gimimini7724
3 жыл бұрын
@Kirei Works nope. That's why i am asking
This is the meaning of "when in doubt there's KZread"😄
@vincentblouin5882
5 жыл бұрын
ACE GAMING ahahahahaha true!
@komalgill9842
5 жыл бұрын
ugly
@quill3324
4 жыл бұрын
Good advice, a lot of things were true for me in this video that you talked about. Thank you man
@HorrorFanatic666
4 жыл бұрын
Yep that’s my go to all the time for things is KZread will have it. Never lets me down.
@x2e4
4 жыл бұрын
True
Whos watching in 2024? 😅
@DUNKIESEMPIRE
3 ай бұрын
😂
@illusioncreation
3 ай бұрын
11 Year ago🙂🤝
@daniart3909
3 ай бұрын
👍
@abednegombulaheni7308
3 ай бұрын
Dude m watching this now 03/05/2024 damn 😅
@Hellobhai99999
2 ай бұрын
Me
Thank you soooo much for this video! Took me about 10 minutes and now my watch fits so much better! I used tiny little screwdrivers instead of a pushpin, and it worked just as easily. Thanks again!
This has got to be the most helpful video EVER! I'm super skinny and every damn watch is so huge on my wrist, thanks for this, really made my day :D
On most watch bands there are arrows located on the inside of the band indicating in which direction the pin is to be removed. When reassembling replace the pin in the opposite direction of the arrow with the "split" portion of the pin going in last as this video shows . Also if a link does not have an arrow then that pin and link is to be considered non-adjustable.
@rakajawaa5500
3 жыл бұрын
Thank you!
@kapishss5540
3 жыл бұрын
I WAS WONDERING WHAT THE ARROWS WERE FOR
@Seezyy
2 жыл бұрын
None of my links have arrows.
@williamsandler1363
2 жыл бұрын
@@Seezyy Use maginfying glass and plenty of light bet you’ll find em
@Troybranding
2 жыл бұрын
The arrows on mine are on both ends. Pointing the opposite way
This was uploaded when I was 12 yrs old. Now it helped me today ❤ Good knowledge never gets old
Thank you so much mate. Life saver! Spent a tenner on fixing one at a shop and still ended up a bit too big and I was thinking of ways to let my mum know that I’d have to use an other tenner 😅 But this was so simple yet effective and had it done in a matter of minutes. Thanks mate 💪
Great easy to use tutorial. Thank you very much. I had a quote done at $50 and that's all it takes. Glad I did it myself.
Thanks man my wife thinks im pretty clever now.
@santana9215
3 жыл бұрын
are you still maried to you’re wife?
@mr.moneyboy9827
3 жыл бұрын
@@santana9215 lol
@Erec07
3 жыл бұрын
@@santana9215 i want to know too
@a1keni2k
2 жыл бұрын
@@Erec07 i want to know too
@3xoticG4m3r
2 жыл бұрын
@@santana9215 hopefully 🥲🥲🥲
Looked through some other vids, this guy had the best idea yet, especially with lack of tools and with stubborn pins being stuck. Thanks a million.
My stainless steel wristband came with the second method tool. Thanks to your how-to video, this process was a breeze. My watch now fits perfectly. Thank you for going out of your way to make this video and share it. I really appreciate it.
That thumbtack was exactly what I needed. I have a repair kit with all the tools, but it was impossible to get the pins out of this one particular watch. Worked like a charm!
Worked like a champ! I would try not to squeeze more than you have to with the pliers, so that you don't flatten the wider part of the pin that keeps it in the hole. One way is to look closely at the pin and put the pliers on the areas where you see the split, that way it won't flatten the keeper. I watched your video before trying it on my own and it helped to see what to do first. Thanks for posting,
Thanks a bunch! I was frustrated with other recommendations of a paperclip, watch tools (most people don't even have one!), etc. Then I resized two watches in 10 minutes. You're the best!
Omg this made it so easy. I just got my new metal strap for my fitbit Versa 2 and I love it it was just too big and I was a little upset until I found this video. Thank you so very much!!! Saved me from giving up on wearing it. I love the look and I love the fit. Thank you for showing how to make it fit better. This is my top video to watch when I need to adjust my watch. Thank you so much again!!!
Who else here because they have skinny wrist lol
@kayaeki
Ай бұрын
Me lol
@mranihub
Ай бұрын
😅😅
This is awesome, you made it so simple for me, to think I went to a watch shop to have my new watch re-size and was told they don't have the tools for my watch. I can't wait to do this and finally be able to wear my watch. Thanks Nils!
@VonSteiner1
3 жыл бұрын
6 years later, how does it fit?
@calebbb5674
2 жыл бұрын
Does it fit
@Yeah-g
Жыл бұрын
Dang a watch place that doesn’t have the tools to fix a watch… What a time to be alive
This was perfect! I watched one other video first and didn't feel like I learned what I wanted. Saw your video and it was like you were speaking directly to my brain. I understood and grasped the concept immediately! I didn't even need to finish watching the whole thing. As a matter of fact, by the time the video had finished playing, I had already taken the link out and put it back together! Finally!!! My watch fits correctly! Thank you, thank you, thank you! (The reason I hadn't taken it in to some place was due to my getting the watch just as the USA was going in to Coronatine aka quarantine for COVID19)
Thank you so much for your info. I did along side you and now I can use my watch which has been sitting around for more than a year. You're a life saver. 👏👏👏👏👏👍👍👍👍
Wow... The first method you showed was super easy to do. Well done! I always wanted to know how to do that!
@darylruffus6127
6 жыл бұрын
Spatry j
@darylruffus6127
6 жыл бұрын
Spatry o]]8
@komalgill9842
5 жыл бұрын
Who asked
@keithsmith3534
4 жыл бұрын
Brilliant didn’t even need to use an hammer 🙈
Saved me a ton of time and $20.00 at the mall. A friend gave me a watch for my birthday. I put it off for a while to modify the band. I used your method but couldn't find a hammer so I used a small crowbar. It was hard at first. But I used another person's suggestion with two books to create that gap. Worked like a charm.
This video is a blessing to all humans who wear watches.
Your video is such a great inspiration. I've just finished adjusting my watch for the first time and I'm so proud of myself.
I got a watch for my birthday and i had to watch this video cause of lockdown i could not resize my watch so thank you now i learned to do it myself
Everyone has wood like that lying around the house
@djangojill8310
7 жыл бұрын
MrCosmo314 i cant
@fairrttg989
6 жыл бұрын
You wanna see my pack of wood?
@aojbooker8650
6 жыл бұрын
I used a box with a hole in it
@kidda74
6 жыл бұрын
I've always got wood! :)
@ZeranZeran
6 жыл бұрын
.. Well they should, to be honest. Get a fucking cutting boar made of wood. Get a desk made of wood.
This video and its comments still helping people after 10 years. Very much appreciated 👍
Did this in 5 minutes at home and got to fit my watch perfectly to my wrist. Big Thanks!
Thank you. My head was about to explode. Was done With my sons watch minutes after seeing your video.
@komalgill9842
5 жыл бұрын
you sound white
@Max-jp6dw
4 жыл бұрын
@@komalgill9842 you sound stereotypical
@AD-kk6yn
3 жыл бұрын
Komal Gill why does it matter in the first place? Stfu
@Acore-ly9qx
3 жыл бұрын
@@komalgill9842 bitch ur white💀 and why thw fuck wouls that even matter
Great bro so the proverb came true,"when there is problem there is KZread" 👍👍👌
I just wanted to comment and say Thank you. With your tutorial , I was able to remove two links from my nephews watch easily without having to pay someone do it. Thumbs up for a great diy.
You sir are the cat's meow. I used a push pin, a wire cheese slicer board, and the heavy handle of a butter knife. Worked like a charm. Kudos to you DIY Nils. Thank you for sharing.
This was an outstanding video. I just can't believe all the bitching and moaning and corrections. I watch tons of video on youtube and by comparison, this one is the gold standard. Thank you for being very articulate, explaining what needs to be explained without over-explaining, offering options and having an extremely clear picture and audio.
@LRN2DIY
7 жыл бұрын
You made my day! Thank you!
@cynthiamcdowell1999
4 жыл бұрын
Yes u r Rite . Not a bunch of over explaining n giving opinions n options n I’m usually screaming at the video saying.. “OMG come on with it already! “ no of that here Thank goodness 😅! Very articulate and get it done ✅
Thanks for your help! Saved me a trip get it adjusted.
i don't write reviews but i wanted to express thanks for this demonstration. i watched other videos about the same procedure and found them long,discouraging and complicated. your method was super easy bc i had all the tools already available. you can even substitute an item, if you have any imagination at all i am now able to wear my favorite watch and i am grateful for the money i saved for not having to go to the jeweler. in a nut shell,clear and precise explanation!
Almost returned the watch - THIS WORKS ! Thank you for making this tutorial.
thank you so much this helped! i didn't have wood like that but if you use anything like a dresser or a desk that splits and has to flat surfaces between the crack it worked for me!
"this way is easier" **Struggles to line up the pin for 73 seconds**
@jay3252
4 жыл бұрын
Oof-
@bisayangdrayber6813
4 жыл бұрын
But atleast
@x2e4
4 жыл бұрын
Haha
@karnilar3067
4 жыл бұрын
arvlogz 1.0 ggggggggggggggggggggggggggggggggggggggvvv
@mattijonsson8885
3 жыл бұрын
L cheap ass watch and I can't get the pin out there's no arrow to show where it goes
I got a watch for Christmas and my wrist is a little to small, so I bless the people who make these videos.
Thank you so much! I had this tool in my collection but could never figure it out (I thought it was some kind of grip). Now I've resized two watch bands in under 5 minutes and I'm a happy camper!!
Great video. I'm young and like stylish watches and will probably get a new one soon. So in case it is too big, I can easily adjust the length bc of this tutorial. GREAT VID!!!
@moriahr4340
5 жыл бұрын
solar_corndog your picture 😂😂😂😂
Thanks a lot brother!! You earned a sub for life!
I followed this and it worked so well! The watch fits perfectly, I had to go back though because I took three links off of one side and it made it sit crooked on my wrist, make sure to take off evenly on both sides! Thank you to this man!❤
Was literally about to pay someone to do this cause I didn’t have a clue. So much easier than I thought and I did this in no time! Thank you
SAVED ME FROM SPENDING MONEY TO ADJUST MY NEW WATCH! Thanks man!
@rajan1357
4 жыл бұрын
give party😂😂
Good vid. The great thing about it is that Nils makes a point that the split side of the pin goes in last. Very important piece of instruction missing from some other vids I watched prior to finding this one. Thanks, Nils. I used an opened paper clip instead of the push pin and did it on a wooden counter. Did this on my $400 Victorinox, but would def not do this on a 3K TG as someone asked here. Not everyone is handy, so why risk finding out that you're not. I put a piece of paper towel between hammer and pin when I hammered the pin back in to prevent scuffing. Then I used the paper clip to countersink the pin just a tad so it won't work its way back out after wearing the watch for a while. I think that blue tool, while it doesn't look all that convenient, is great when you want to make sure you don't scuff up your watch band with a missed hammer blow.
Thank you so much for the help. I was able to re-size my fossil watch with household items (tiny flathead screwdriver, my desk - which has small holes in it- a small hammer, and pliers)! Much appreciated.
I got the little contraption from Amazon and adjusted my Stauer watch that has been sitting around my drawer for about six or eight months it finally fits great and looks great thank you so much!!!
I injured my thumb doing this 😭
The name of the watch at the end is I By Invicta Men's 43619-002 Chronograph Stainless Steel Watch. It's available at Amazon for $71 and it's been a great watch. I'm wearing it right now.
thought of taking my 2 watches in a repair shop but bumped here.Great video it helped and save me some bucks!Thank you!
when I saw this vid, I quickly clicked it and looked for the home tools. worked like a charm. Thanks
Yous said any hammer would be sufficient. So I took your advice and now every watch I own is smashed into oblivion!! I couldn't find my sledgehammer, so I obviously had to use my jackhammer instead. now I have 23 totally destroyed, non-repairable, watches!! Well clearly this is your fault completely! How could someone do such a thing!? Huh??
@doja954
4 жыл бұрын
😂😂😂😂 good one
@nkosinathishaun603
4 жыл бұрын
😂😂😂😂😂
@givenkupar5133
4 жыл бұрын
Omylawd you 😂🤣
@2Stro41
4 жыл бұрын
Oh boomers 🤦🏾♂️
@RandolfLycan
4 жыл бұрын
I used a hammerhead shark and it chewed the whole thing up 🤬
No need for sawed wood, just get 2 books and push the pin in between them! :D
@edwardthepipsqueak
8 жыл бұрын
thanks thats what i did
@RedaAhmed
7 жыл бұрын
Perfect idea.
@NomanZafartissue
7 жыл бұрын
I did but my books were damaged lol
@Vdubs4life
6 жыл бұрын
Radiatical// lol I just used needle nose pliers and tapped the pin in.
@packyrat
6 жыл бұрын
I used a tin cutter, and used the gap in between the blades
Thank you for this tutorial! I used a wooden chopping board, a wrench to smash, and a long-nose pliers to adjust mine. It worked well! Liked and subbed!
This worked perfectly, actually easier than I thought it would be. Thank you!
thanks man!
where the fuck am i going to find a notched block of wood.
@raulgutierrez5836
8 жыл бұрын
Ask a Mexican
@GustavoHernandez1
8 жыл бұрын
+pumpa kungen Hey, I'm mexican I can help you
@MisterFakeGinger
8 жыл бұрын
+pumpa kungen just use the edge of a counter top and have someone hold it down while you hammer the pin out. i couldn' hold down the push pin, hammer, and hold down the watch with just two hands. worked good.
@em-zs5ut
8 жыл бұрын
+Raul Gutierrez i did this only using a paper clip and my bare hands, must be because im a mexican
@fullercrane8548
7 жыл бұрын
put it between your toes, then just hammer it.
Thanks buddy.. after several months of wearing an oversized watch, i can now smile. Thanks for the fix
Wasn't aware I could shorten metal bands on two watches I have.....had one adjusted a couple times at Nordstroms, but then the band was too,short. By using this tutorial I was able to remove only one link and now the watch fits fine. Thanks for a good video!!
good stuff! thanks so much, adjusted my new Sony SmartWatch 2 for free thanks to your video!
Watching this in 2024🍃
I got a Invicta watch as a Christmas gift. The band is to big and need to get it resized. Thank you so much!! This helped me out a lot!!
You are a genius!! Thank you for this video. The thumb tack and hammer worked perfectly. I’ve been sitting on this Rolex because it was to big for a year now
Hi..thanks for teaching, I managed to adjust the watch strap..with the help of hammer and a small nail. thanks
Just saved me the aggravation of taking an inexpensive watch to the jewelers (where they sneer at cheap watches!) to refit for my young daughter to wear, as well as the charge. Thanks so much!!
@komalgill9842
5 жыл бұрын
Matt Silvers bts is the best
Thank you so much, i bought a new watch online but it was too big so I was trying to give it to a watch mechanic to make it smaller and then I found your video on youtube. You saved my money
Thank you for this video! You're awesome! You saved me from spending 15 euro for each piece I wanted to removed at a watch store. I just did that to my watch and it's perfect now. Thank you again!!!
Wow thank you to show us this method!! I've just adjusted my watch and it looks great! No damage at all! But instead of the screwdriver, I've used a thumb tack and that works just as well. :)
I managed to use a SIM card popper to push my pins out. Slid out and in like butter. Tap from the back of a screwdriver and bam. Link removed and new watch is finally fitting
I found this very helpful. I learned exactly what to do from this video. I am not sure why I feel I must apologize for the people making negative comments about the video. They are more to be pitied than censured.
Hello! Thanks so much for the video - super helpful and I was able to resize my new watch in 5 minutes. I used a styrofoam block and it caught the pins perfectly. Thank you!!!
Great vid. Helped me out a lot.
No, actually it's pretty nice. I'm no watch connoisseur but I've been wearing that Invicta watch for over a year and it's held up really well except for the chronograph, which stopped working. Maybe it just needs a new battery.
Thanks guy, just watched your video and took a couple notches off my watch and it fits perfectly! I did this without the wood and just had my husband hold the sides while I hammered lol made a couple tiny dents in the table but overall worked well. Thanks again!
I just adjusted the band on my brand new Invicta watch. Thank you for posting this video.
Thank you Nils, for giving me the courage to take a hammer to a new watch. :) If you file the point of the pushpin (wasn't he a Russian writer?) flat it's a little easier. And Bluebird Toffee Hammers are perfect for this.
@klam77
5 жыл бұрын
pushpin is better than shakesbeer.
@azizaomar4508
3 жыл бұрын
@@klam77 PUSHKIN
just tried with pin remover from amazon will not line up
Pretty Helpful! I I had way less tools and just followed the same procedure you did and it worked out perfectly. 👍🏽
Okay , So a genuine review .. THANKYOU SO MUCH NOTICE BOARD PIN AND A NORMAL SIZE PLIER HELPED ME RESIZED MY FOSSIL WATCH .. I WAS SO ANXIOUS TO WEAR IT AND WASN'T ABLE TO WAIT TO THE SHOP OF WATCH RETAIL ITSELF. BUT UR VIDEO HELPED IN ME RESIZE MY WATCH IN MINUTES. THANKS AGAIN❤❤❤❤
that gadget is freakn cool
I always used to think resizing had to be done professionally 😂 I find it so cool to do tho
Damn it was easy! I allways thought this would be much harder, but took like 2 minutes to do the job with these tools. Thanks!
Thank you so much. I was stuck about how I was ever going to wear my new watch , which was bought to big. With your help I now can wear my watch with confidence. Thank you u tube. So simple once the process is explained.
I like your video -Ava
When bro pulled out a hammer s screw drive I was like yeah I don't got that lol gotta run to the store 😂
I was doing this exact thing at my desk with a push pin and couldn't figure out how to get the pin the rest of the way out... Then I found your video and it was what I needed to realize pliers. Thanks!
This video was so helpful, thank you! I didn’t really have these tools so I used a spoon as hammer and the pin for opening my sim tray, it’s a perfect fit and it pushes the pin from the bracelet all the way through. Didn’t need pliers. Took me 5 mins
im trying to do this but i cant seem to push the pins through they are really stiff what can i do?
@65revenge
8 жыл бұрын
There should be holes on both sides of the link.....if you can't get the pin out by using one hole, use the hole in the other side of the link. These pins are not just a smooth piece of metal.....one end has a bit of a flare to it, so when linking back up be sure the flared end goes into hole first. This takes patience, but it's worth the effort....what's worse than a watch that flops around on your wrist!
Thanks so much. At the mall they charge 15.00 to adjust...
@akatsukiawsome13
5 жыл бұрын
Considering that is a minute's labor at most, that is 900+ an hour... Fucking hell! ... I'd probably charge $5 because people would pay it, I'm such a scumbag :)
Wow! 2021 here ! Just saved me $50 at the store to adjust my watch! Great video! Super easy! Did it my self in 15 minutes!
Awesome 👏 easy peasy thank you I’m getting ready to try it on 2 new watches now.. I used the lid off of a Rubbermaid pitcher. Turn the lid upside down and u have the 2 slots to lay the watch across to be able to push the pins out. I used this on a Michael Korrs watch band n couldn’t believe how easy it was but that was a few years ago so I was glad to find this easy video u have given us . Thanks 🙏😊
how for a geneva watch?
broke both of my pins
@harvardford8752
6 жыл бұрын
Focused Racoon you’re not smashing it hard enough Trick is to hit it hard enough where the thumbtack pierces through the wood block and reaches the depth of hell
@klam77
5 жыл бұрын
@@harvardford8752 LOL: the answer is MORE force not LESS?
@ianbarber2937
5 жыл бұрын
Why did you listen to a random guy on the internet
@komalgill9842
5 жыл бұрын
sCieNce
@thatsacapchief3193
5 жыл бұрын
Ian barber cause it actually works if you’re not fucking stupid
bought the tools online, didn't know how to use them, now I do, THANKS!!!
11 years ago and it helped today , thanks brother man
so I got an $800 watch should I take it to a jeweler??
@LRN2DIY
8 жыл бұрын
+ThatGamingPro - Yup. When you're dealing with something that expensive, it's probably best not to risk a DIY job.
@lordtrump8255
8 жыл бұрын
+ThatGamingPro no, through it in the garbage and buy a rolex. $30,000 is the price you're looking for
@7assoonzaking810
8 жыл бұрын
i have an 8500 dollar watch when i saw this vid i was like im definatly not banging my watch with a hammer
@chillsbygaming
8 жыл бұрын
+7ASSOON zaking I was thinking the same thing.. except mine is $300, not $8500 lol
@treehugger4916
7 жыл бұрын
nice lie kid
Thanks a lot, you did save me a trip to the jeweler, but I want to donate a dollar and can't find a link :/
@LRN2DIY
7 жыл бұрын
Thanks, MC. If you still want to donate, just click the small "i" in the top right corner and then click the link that says "Support Nils Rasmusson". I think this is the direct link: kzread.info/dash/bejne/oWeCyMebec2ynLg.html&ypc_ft=T&ypc_ii=o3NfebIjLlU&ypc_it=V&feature=iv&src_vid=o3NfebIjLlU&annotation_id=video%3Af3a97171-c516-4ed4-87a7-edc469e9fce4
@IdentityChrist
7 жыл бұрын
I get an error: Fan funding isn't available in my country -_- Once it is, I'll pay my debt back :)
@LRN2DIY
7 жыл бұрын
No worries- thanks for trying!
@rayhitchcock6034
7 жыл бұрын
MC Malzahar ta
@ei05056
7 жыл бұрын
Didn't know Malzahar wore watches.
Multiple places in the mall were trying to charge me $20-$30 to adjust my strap, and the snobby Jewelers place that does it for free seems to be annoyed after you show up more than 2 times trying to dial in a perfect fit, so learning to do it myself is a huge win, thanks 😊
Thank you so much, it's my 12th birthday and I got a nice watch that didn't fit me so went to you and now it's perfect, thank you once again. This deserves my like