Love ur work 😍. How precisely you do all the replacements 👍

I don’t know if I’m missing something so basically you’re resetting a battery to 100% without actually refurbishing it to 100% so people can get scammed thinking that they’re getting a new phone or a new battery that it’s actually 80% while appearing to be at 100%??????? Got it.

@gerrit9106

Жыл бұрын

Yes thats sad 😅

@batman-oq1vc

Жыл бұрын

I don’t think you understood what he did. He removed the board of the original battery and put it on the new battery but since the original boards health still registers as 80% he reset the battery health to 100% so new battery and old board.

@gerrit9106

Жыл бұрын

@@batman-oq1vc I think he understood that. But he thinks that there could be people who would fool you. The people do not exchange the battery but set the capacity simply high to 100%.

@tawfikiskandar4560

Жыл бұрын

What i see no scam here😅 battery is new

@dang9668

Жыл бұрын

No that’s not what’s happening at all. The transferred chip had the old battery info. By resetting it once the chip is installed to the new after market battery, it deregulates the new battery health and wipes the old data. It’s wiping the old data not modifying bad batteries to sell for scams. Hope this helps

What a process! Thanks Apple!! Great video..

Hello, then i need tag connector for each battery I have replaced? To put them together? And leave they together? Or just to connect them first and after the phone goes on, I can take it of! Many thanks

by a chance you have detailed reviews on i2C i6 / Luban L3 mini / JC V1SE / Qianli iCopy , please? Can you share info. thank you!

Where do you get the battery for iPhone 11 Pro that needs spot welding. I am not a reseller

Great Video. I have used this method to replace my iphone 12 Pro Max battery that was at 73% and so was showing the service message 'your battery health is significantly degraded'. I replaced the battery and set the health to 100% and cycle count to zero. Even though the health is showing as 100%, the service message is still there? Do you know why this may be? and how do I remove it? Thanks

Is qianli icopy and apolo better You shouldn't need to replace any BMS if you have copied over the serial number to the new battery

if there is software update, it will follow new % or old % ?

Hello, i saw the video and i buyit from the link, but when i change the SOH to 100% or something on the iPhone dont chance! Stay The same! can you help me?

Tag flex need to install new battery or can it remove after last step (the batt healthy show 100%?

wait why do you need to leave tag flex between the battery and the board?? I'm 99% sure that's not necessary, correct me if I'm wrong?

@MrPhoneDoctor

Жыл бұрын

No need to.

@Sahinapili

Жыл бұрын

Just wondering, if you reset the bms board with tag flex, then no need to leave it on the bms flex? Did I understand right? Or should we still first connect the battery with the tag flex then remove it? Can you clear me out?

Does the bms board havve to come from the original phone?

@MrPhoneDoctor

Жыл бұрын

Yes it needs to come from the original battery you are replacing

What will happen if i just reset the battery capacity to 100 and cycles to 0 and just plug the battery back in the iPhone 11?? Will it show 100% capacity and if so will it reset immediately or will the % drop as normal?? Thanks🙏🙏🙏

Will the battery Health go down as normal or will it always say 100% after this? Thanks

@phonefixtoolsphoebe-china

2 жыл бұрын

go down as normal from 100%

@sehanliao2163

2 жыл бұрын

Tag flex likes a simple IC that leave a battery data on the BMS board , but this data will never decrease automatically, in fact it forever stays at 100%

@suparicis5847

Жыл бұрын

@@sehanliao2163 wrong.

The tag flex for the battery replacement for iPhone 11 is out of stock where else can you get those tag flex at?

i2C KC01 battery repair tool set for renew iPhone Battery Cycle Data, calibrate renovate iPhone Battery Health.

Buen día, ¿es necesario un flex para el iPhone Xr ?

Where can I find a battery like that with the tool

Can the iPhone 11 tag flex cable with the iPhone 10s battery?

Can i use a iPhone 12 battery in a 12 pro max to get that error ? i don't have another 12 pro max battery

@MrPhoneDoctor

Жыл бұрын

Cannot

Where are you located?

If you reprogrammed the original cable why do you need to use the flex cable with it?

@MrPhoneDoctor

Жыл бұрын

You don't error on my behalf

@tattoosteveneo

Жыл бұрын

@@MrPhoneDoctor awesome thanks. I just got my i2c in today. Still cheaper than sending it to apple or a repair shop after buying the new battery. Thanks for these videos.

@steppooncc

Жыл бұрын

@@tattoosteveneo I actually ordered one, and waiting. Have you replaced and reset you battery with the i2c? Working or not? How’s your new battery going? Last for long? Thank you.

But that won't actually increase the capacity of a used battery right. It just change the display but not the actual capacity.

So, where's the link to the battery?

All good, but is not so comfort to have batteries for all phones from XR to 13 just to put them in before programmed one what you will use. I also have this programmer, will buy another.

Thanks! I am going back to Android.....

@MrPhoneDoctor

10 ай бұрын

Great! I just wish all iPhone users would see what Apple is doing. Flag out wrong and should be illegal

Shout out to China PHONEFIX Shop Team they are a company who specializes in offering repair tools, parts and screen refurbishing machines

@ay3070

Жыл бұрын

DO they have good screen quality for Samsung's and iPhone? As well as good batteries?

Can a third-party battery replacer put a fake battery in your iPhone and in settings it shows it's a genuine Apple part?

@MrPhoneDoctor

6 ай бұрын

Yes they can. However that is very unethical to do that and should be disclosed if battery is replaced.

@tac-tps2052

5 ай бұрын

thx@@MrPhoneDoctor

so if I need to fix a battery,how many I need to get? I see you used 2...non-original,to give you an error and another one with welded old BMS port,right?🤔

@bananacaramel

Жыл бұрын

im trying to change my iphone xs as well. i think it’s possible to do it with the old battery inside and new one. 1.reset old battery 2.take out old battery and insert new one to get the error 3.remove dbms from old battery and weld onto new one 4.insert new battery again with welded dbms i think it’s a solid plan but what do you think?

Well I got a used iphone 11 pro max battery health on 100% but I use battery stats shortcut and analytics data to determine my battery health level, my battery level was shows 93% and 0 charge count, is it a good battery

@moonjirou

Жыл бұрын

The explanation and reason for this because the old bms flex are still reading the original battery level even if you already modify and change the battery stats via the tools given.

Couldn't you use that tool to just reset the percentage without actually replacing the battery?

@busterscrugs

2 жыл бұрын

yup. the majority of batteries on eBay are exactly this, a used battery with the data cleared. then they slap a gold sticker on it and advertise it as way higher capacity than it truly is.

Wait, I still have to mess around welding stuff? Can't just copy the serial number over and use the board on the non-genuine battery?

@MrPhoneDoctor

Жыл бұрын

Unfortunately yeah you need to keep the original BMS board and transfer it. Thanks to Apple 😔

@raeldor

11 ай бұрын

@@MrPhoneDoctor I did all this, but don't have a spare battery to de-register the old battery. I put the new battery in after setting to 100%, 0 times, and it's still showing 'service'. /sigh

@MrPhoneDoctor

11 ай бұрын

@@raeldor you need to put a new battery in to unregister

@raeldor

11 ай бұрын

@@MrPhoneDoctor That's unfortunately not an option. There's no other way to re-calibrate afterwards?

@MrPhoneDoctor

10 ай бұрын

@@raeldor there are some new tag flexes that don't require soldering. We have never tried them so don't know how well they work

I have a new flex now from the i2c of the iphone 11 that is different from this one I don't work any of the ones I put this one on this model they all work now the new model didn't work at all. shows the correct % but does not load.

@darylclifford

Жыл бұрын

I don’t know what you’re trying to say!

10:11 Music plz?

Do the battery will last long again???

@dragac90

Жыл бұрын

No Software update is not allows that

Mine not working😅

some say you can remove the tagflex

@MrPhoneDoctor

Жыл бұрын

Yes they do. Manufacturer say you need it installed. 😒 I guess we need to run some testing

@law2181

Жыл бұрын

@@MrPhoneDoctor is there a reader that copies over the bms info and pastes it onto the new bms

@MrPhoneDoctor

Жыл бұрын

Yes check my videos there is a good one by i2c

@law2181

Жыл бұрын

@@MrPhoneDoctor I wish they didn’t cost so much! I only need to do my phone. I’ll just live with not having the battery health

@tattoosteveneo

Жыл бұрын

@@law2181 if you look in the site he recommends it’s not that expensive!! I’m going to get me one

Do you need that flex cable also for xs, xr and xs max ?

@freshboypr

2 жыл бұрын

No, It’s for iPhone 11 and up

@tetaizozadja7080

Жыл бұрын

important battery message will appear on iphone XS and above... information in this video that it goes from 11 and above is false...

0:45 this!! hey apple, they brought back the iPhone 5s touch id Serial era.😪

Buenos dias, es necesario dejarle instalado el flex sobre el otro flex de la batería?

@MrPhoneDoctor

2 жыл бұрын

Si es necesario por qué ese es original de batería. Si no vas a tener error

@alejandrorobledo4548

2 жыл бұрын

@@MrPhoneDoctor gracias pero me refería a este JC Battery Repair Flex Tag-On osea es necesario dejarle ese flex.

@MrPhoneDoctor

2 жыл бұрын

@@alejandrorobledo4548 el Tag on si lo necesitas

@alejandrorobledo4548

2 жыл бұрын

@@MrPhoneDoctor muchas gracias. Dure mucho buscando esta solución y porfin la das tu. buen trabajo. Saludos desde Chicago.

@freshboypr

2 жыл бұрын

@@alejandrorobledo4548 una vez ya concectes el tag-on flex con la batería ya programada lo dejas puesto si el cliente quiere que cuando lo concecte a la PC a un programa como 3utools le aparezca en 100% o 99% la condición. Si al cliente solo le interesa el 100% en los ajustes puedes usar ese mismo para reprogramar mas baterías

its work possible without i2c cable

@MrPhoneDoctor

Жыл бұрын

Yes no need to install i2c cable

@svenfischer9912

Жыл бұрын

@@MrPhoneDoctor but when i dont leave the tag flex will i not notice any difference?

@markaffleck4622

Жыл бұрын

From things I have read, there still seems to be some confusion on this. Does anyone have the definitive answer?

@MrPhoneDoctor

Жыл бұрын

@@markaffleck4622 no need to install flex

@markaffleck4622

Жыл бұрын

@@MrPhoneDoctor Thanks for the reply. Great video.

If you reset, to 💯 why you didn’t use the same thing 😅😅 White changing another battery

This is too much trouble I’ll just break my phone and get a replacement

@MrPhoneDoctor

9 ай бұрын

Or just put new battery and lose the battery health

Can I just use the device to Edith the battery health to 100% without replacement?

@lindonberishaj8096

2 жыл бұрын

Yes you can

@sehanliao2163

2 жыл бұрын

Well direct programming is available from 6 to Xsm, 11and above need a tag flex .

Ahhh! man this type of work is not in india 😒😔

I bought a used iPhone 11 and it started out on 74%.. kind of an L

@applekidn1

10 ай бұрын

I got xs used and it was 78. Dissatisfied was an understatement

Spanish pleace

@dragac90

Жыл бұрын

Why?

👍👍

Apple's serialization of most/all parts is sick! No other purpose than making it more difficult/impossible for 3rd part repairs. Fuq Apple! lol

@MrPhoneDoctor

Жыл бұрын

I agree with you!

@markaffleck4622

Жыл бұрын

Spot on. I feel for the third party repairers, doing an honest job at reasonable prices. Apple rely on the fact that the average 'Joe' will have fear and doubt when they get these stupid messages leading them to believe that they have somehow had a rip-off job, not done properly. I am not in the business, but I can see what Apple are trying to do!

MUSIC IS SO BAD. Why did you think that was cool?

@MrPhoneDoctor

8 ай бұрын

Who said I thought it was coo

The best way to avoid rapid battery performance degradation is to protect your phone

@dragac90

Жыл бұрын

How

if there is software update, it will follow new % or old % ?