I'm going to try this on my wife, her attitude has changed from when we first met. I wonder if it will revert her to her original self! I live in hope.

@bronsonteruna9453

3 жыл бұрын

No hope dude.. You screwed yourself up the day you married her..

@geremiazjauregui2415

3 жыл бұрын

New dick usually helps...lol

@bradleyford987

3 жыл бұрын

You may have to ground both nipples!

@asukakazama449

3 жыл бұрын

keep pushing the lower button hard enough can help sometimes .

@jayjohnson3758

3 жыл бұрын

Best reply ever lol

Here's my story. 2 vehicles both went bonkers after a strong lightning storm with rain. I tried water clearing additive in the tank,zip, tried gunk remover additives,zip...check engine light, total loss of power clunking down the road. I saw this utube, read the comments and went with disconnecting both battery leads and grounded them both for 20 minutes then reconnected Took them for a long hard run & presto, works better than it has for many years with no problems and engine lights out. A bonus was my automatic tran shifted problem free for once. Thankyou...thankyou....thankyou!!!!

thank u sir straight to the point no boring intro

Thank you for this video I m a 67 yr old grandma with a 2002 Silverado that just stopped no crank no power I checked battery it was good Checked all fuse they were good. I found your video and figured I had nothing to lose. I did what you recommended and my truck started Thank you again

@quedog10pop

Жыл бұрын

You still want to get it checked out by a mechanic. This is a temp fix for you because something stopped it. All got did was reset everything. Keep an eye on your check engine light and get the code read as soon as it comes on, if it does. That way you'll be able to spot the reason it wouldn't crank or start

@dougjamesvandals

Жыл бұрын

Great news!

@stevengorum2727

Жыл бұрын

If the problem comes back it's always AN IGNITION SWITCH WAS LIKE 45 bucks Intex 10 minutes to put in

@jamiejones6994

Жыл бұрын

@@stevengorum2727 😆 🤣

@gillchristgaba6303

Жыл бұрын

Why doesn't it work on the civics, and what about the accord?

Mk II Vauxhall Corsa. Thank you so much. After trying a slightly different method (disconnect earth for 30 minutes then reconnect) I tried this method and it worked brilliantly.

Thank you. I came across this video after taking my car to my regular shop. They are good guys and told me is was an issue with the PCM, but they could not fix it and I should take the car to the dealer. OH NO. I am a 64 old female and know better than to take my 2009 ford explorer to the dealer........ Long story short this fixed worked for my issues. You saved me a ton of money. Thank you again.

@user-sq9td8nu9i

3 ай бұрын

AMEN! now to try this on my nissan micra that wont start = otherwise its going to the scrapyard; Glory to God anyway, whatever will be...

@Bobcatspiritdude

2 ай бұрын

Good job sweety! Money well saved from the dealership

an amazing video. Mechanic was asking $350 to fix check engine light and your way fixed my light and passed emission. Great job and thanks for your tips.

@cryptoking7093

Жыл бұрын

What? Lol

@bflkurby1

Жыл бұрын

What was the code you'd get?

@Bellathebear777

Жыл бұрын

​@@bflkurby1 Give him $1200 & The Dr will tell you. Lol

@jameswebb3932

Жыл бұрын

​@@Bellathebear777😂😂😂

@changi8754

10 ай бұрын

What's the code on your check engine

thanks for posting. a simple way to clear the system. and yes a test light will let the energy burn slowly, and yes becarefull with jumping the battery, batteries are east to expload. im 60 now, when i was 18, back in the day i would go to the old motor heads and ask how to do thinks,. sadly all of them have passed now. and everything is new and different. YOU ARE NOT THE OLD MOTOR HEAD, thanks for posting and helping everyone. thank goodness we have youtube to help work on cars and such. very best wishes. thanks again

@OGRH

4 ай бұрын

Would this work to reset a brake pedal position sensor? 14' GMC

I watched this because my 05 sable was running like crap, all the symptoms of everything gone wrong. After I watched this I tried it on my car. Follow his procedure. Now my car runs perfect. No check engine light anymore. Thank you very much for sharing your knowledge.

Thank you very much for this video. I had excessive high revs and red hot exhaust. I removed the cat and the inside had something ratteling. It still ran high and hot. Replaced o2 sensor and still the same. Removed the plugs and they were soaked in oil. So i removed valve cover to replace the gasket and new plugs. Still ran high and exhaust hot. Cleaned injectors and throttle body. Cleaned idle air valve. Still ran high and hot exhaust. Watched your video and did exact as you said. Presto she back to 700 rpms and no more hot exhaust. Thank you very very much for this video. Saved me a 400 or more buck trip to a shop. Total parts 300 and now runs like brand new.

Done this and for last three days so far car starts first time thanks mate

Worked !!!!!!!! I have a 2006 Chevy Aveo. The check engine light came on and Via my OBD code reader, I had a small evap code and an oxygen sensor code. I looked into both issues. The check engine light came back on and now I had those codes return and three new codes for throttle position sensor, peddal sensor and transmission module sensor. I changed them. The problem remained. . . . Now the car would run good for a few minutes and then run like crap and go into limp mode. ( no fuel pedal response and car ran like it had one or two dead cylinders) I then removed and cleaned my MAF sensor checked and renewed all my major ground wire connections at my battery, starter, engine block, and body grounds. Bad grounds can effect sensors. . . .so they say. It ran even worse!!!! I was at my mental end. I was almost going to take her into the back country and light her up 🔥. Instead of throwing more money at this car I found your power control module reset. DID it step by step and This car now runs better than ever!!!!!! No check engine light = no codes. It accelerates better, shifts better. . . . Like a new car. You save us average Joe's from getting robbed by shop rates and shops that sell you more than you need and help us fix our own. Good job my friend!! I subscribed, liked and hit that bell.

@GK7GARAGE

2 жыл бұрын

Glad was able to help!

@kingofhuecomundo9394

2 жыл бұрын

@@GK7GARAGE I have a 00 Corvette and have inappropriate shocks showing up will this reset the computer or what else should I do!???

@robertlipperd7352

Жыл бұрын

almost lit that beeeeautch up ! lmao

@Bobcatspiritdude

2 ай бұрын

Huh??🤔​@@kingofhuecomundo9394

@nouseforaname6846

Ай бұрын

Wow! I'm not the only one with an 06 aveo at his wits end😂 Just wanted to check some comments before I tried this 👍

I did this on my 2005 Nissan Frontier after the dreaded P1283 code would not go away after I replaced the O2 sensor and an exhaust pipe leak. Worked like a charm.

this worked for my 96 Plymouth Voyager ! Thank you ! the O,B.D 2 was showing three malfunctions , and after following this procedure I was able to get it down to 1 which allowed me to pass strict Cal. emissions ! THANK YOU !

@dominicogutu6

2 жыл бұрын

My mitsubishi rvr 2000 engine 4G93 showing drive, neutral and gear 3 WHT do I do?

@Pitchblackplays

2 жыл бұрын

​@@dominicogutu6 I hope you still don't have the problem, but my Mitsubishi with 4G64 engine has the same problem, that's limp mode.

@kraymb9183

Жыл бұрын

You blow your ecu by doing that 🤦‍♂️an ecu can be reset by thaking Both terminals (+,and -) from batterry for 30 min

@jerryjones6675

Жыл бұрын

So KRAYMB, it seems to be no more comments after yours. I was suspecting this to be bad info as well. 3.6 million views has my head spinning. What is the right way to clear?

@wild8757

4 ай бұрын

@@jerryjones6675 fix the DTC codes or they’re just gonna eventually come back, like you said unplugging your battery for 20 or 30 minutes does the same thing

Working on my 2006 GMC Duramax, I accidentally and unknowingly knocked loose one of the plugs on ECU. After I finished what I was doing the truck started throwing non-communication codes between the ECU and the TCU along with some other codes. After much painful frustration and talking with Duramax pros I discovered the loose plug. Now all the other codes disappeared except the ECU and TCU codes. After many more hours of searching the internet and youtube as well as talking with the diesel pros I came across your KZread video. It sounded good to me so I followed your instructions to the letter. Problem solved. No more codes! Thank you! I think I will finally get some sleep tonight,

@abner0404

Жыл бұрын

Actually have a 6.0 with a p0603 no start thinking about giving this a shot tomorrow

@GK7GARAGE

Жыл бұрын

I’m glad it helped

@markvermeulen1372

Жыл бұрын

@@abner0404 It’s noticeable that you did not return and contribute your experimental results.

@rusty299

Жыл бұрын

​@@abner0404 did it work for you

THANK YOU so much! The night before last I went out to roll up the windows in my Chevy 2011 HHR and left the key in the ignition. Yesterday about 5 pm, I got in the car to leave and saw what I had done, and of course the battery was dead. I put in on a charger for about 40 mins and then drove off. Immediately when driving up my street, something didn't feel right. I drove another mile or two, on 30 mph roads and noticed when I let off of the gas, the car would slow down, just like it would if it had a manual transmission. As I entered a road with a higher speed limit I finally realized the car was not up shifting out of first gear. Oh, no! I drove the car back home and started looking for answers on the internet and KZread. Last night I tried a process to reset the transmission by turning the ignition key to position 2 and holding the gas pedal down for 15 secs then turning the key off and waiting 5 mins then starting the car. That had no effect. This morning I got back on the search engines and KZread and found this video and watched it several times. It made sense to me. Reboot all of the computers. I said a prayer and followed the instructions exactly. IT WORKED!!! What a relief! The car has a lot of miles on it and the prospect of putting a new ECU in could have been very expensive and not a good investment at this point. Thank you so much again, sharing this knowledge has had very positive impact on my life, for real!

@Jesussavedme

Жыл бұрын

I love that you prayed first ❤️

@Bellathebear777

Жыл бұрын

​@@Jesussavedme ❤🎉❤

@Arizona_rider

10 ай бұрын

Did it start doing it after 50 miles

I am doing this process to my honda city and its great,its working, now my car was back to normal,thank you very much sir ...more power....continue your good deeds.

@GK7GARAGE

3 жыл бұрын

Glad it helped you

@jesselugo3034

3 жыл бұрын

Was your Honda in limo mode by any chance?

@curtdamico8026

3 жыл бұрын

Aashab ,q+

@kericue2065

3 жыл бұрын

@@GK7GARAGE will this work on a 07 vw eos?

Man I had to give this a like and comment this worked perfectly for me. My car wouldn’t start after I changed coil pack and spark plugs cuz I messed with the air intake and after doing what he did in the video it started. Thank you so freaking much I was having my doubts and didn’t wanna take it to mechanic

@gregcampbell5551

5 ай бұрын

did you have any misfires

2002 Chevy Blazer. Did new lower/upper intake manifolds. Put in a new spider from Napa bought online, picked up in person. Saved money. New distributor, PS pump. Was running a little rough. Trouble code P0200. Came up on OB2 reader. Then later P301. Spark plug was fine cylinder 1. Removed injector connector top of manifold. There I found number one injector connector bent down, no connection. I did your procedure in it reset everything wonderfully! Codes gone. Runs great 👍 Thank you for taking the time to help us poor people who cannot afford a shop.

This fixed my mustang for a few months but my main computer is bad so it's starting to act up again like I'll push on the gas while driving an nothing happens so I'll keep pushing then all the sudden it goes super fast lol like it's catching up so now something has been draining my battery so I'm going to do this one more time before i sell it so hopefully the buyer can drive it to the shop for the new computer thank you so much 💓 I was amazed when it actually worked after spending thousands and letting it sit for months 😢 ❤

This fixed a starter relay issue on my VW Passat. Thanks very much.

I've tried this on a 1999 Buick Le Sabre and a 1995 Olds Delta 88. It's worked quite well. Thank you.

Thanks for this video, it just saved my 1996 camry, it started up but died with unstable rev immediately and couldn't start anymore, I followed your video and it is back to normal, thank you so much. P.S. I've just subscribed your channel.

@ToyotaCamry-eh9kd

Жыл бұрын

What a coincidence

Do you know if it would help with a Chevy Equinox as far as resetting that reduce speed on the vehicle

Thank you very much! the code I had basically forced me to eliminate every possible issue there could be with that certain code. And the very last thing I try, worked! Now I know my car inside and out! thank you very much GK7! Super helpful!

@robsavage7471

Жыл бұрын

Well first of all that's motherfuking Ford expedition dumbass now Chevy Tahoe

To the owner of the video; Is this demonstration applicable to Mitsubishi Lancer 96? Thank you

This helped out so much thanks! 🙏🙏🙏

If the negative terminal is hard to access, could I disconnect the negative cable from the bodywork end and jump lead from positive battery terminal to body? Would this be the same thing? Thanks.

Great info!! Thank you!

Worked like a charm on my 2014 subaru outback 2.5l. Thank you!!!

@juliosdiy3206

Жыл бұрын

Can i ask u why u did this? I have a 2014 legacy 2.5

This worked perfectly!! Even resetting by mechanic after replacing 02 sensor fault , fault code kept returning. But this worked on my VE holden. Many thanks from Australia!

@targipgadponson5674

2 жыл бұрын

Were there any extra steps you took that were Holden specific for it to re-learn all its settings correctly?

Bro! Something you made 3 years ago is still coming through! It worked! Got my O2 sensor changed and i thought i got a bad one. After sound this my fuel trim actually went from short term -19 and long term +20 at idle to short term within 3 and long term at -3! I didn't even see this on the trailvoy message board! So i ordered an OEM O2 sensor which I'm going to use anyway and redo this method to see if I get even better gas mileage than the bargain one! 2004 Chevy Trailblazer EXT LS 4.2L I6

@michaelwright1602

Жыл бұрын

I installed a new O2 sensor when I installed a new exhaust on my Park Avenue, the only one I could get locally was a Bosch... Service engine light has been on and engine surging. Installed the OEM AC Delco O2 sensor, looked nothing like the Bosch, and so far, so good. The moral to the story, only use OEM sensors. This is a well known and common issue with aftermarket O2 sensors, at least on GM products.

@quedog10pop

Жыл бұрын

@@michaelwright1602 facts bro! Any electrical component!

A lot of garages will be pissed with this utube tips & help from all angles of problems,, anyways good stuff my man keep up the good tips 👍 👌 🏴󠁧󠁢󠁳󠁣󠁴󠁿

Wow. Just disconnect both cables and short them. This will bleed off all power. 2 minutes. Job done.

Completely serious questions. I have an 05 impala ls decked out after a reason to change all the body panels on the driver's side in the body of an 03 Impala SS. I have all the parts to make it a supercharged engine. Can I do this when I put it on and the extra serpentine belt and will my engine relearn life as a 3800 series 2 SC version?

Good video bro👍 , I'm still gonna try this and hope it fixes my problems but it makes perfect sense on why you go through the gears and just reprogram it manually 👍 . Thanks again bro and much blessings.

@GK7GARAGE

4 жыл бұрын

Thank you and good luck

@jazzsounds8159

2 жыл бұрын

@@GK7GARAGE need help with a Hyundai sonata v6 code 161b this started after giving a jump start to truck.

@demircantavlan4445

Жыл бұрын

will it work on 2012toyota rav4 thanks

Thanks for sharing this tutorial how to full reset vehicle this is great

Thank you so much brother u really save my time and money God bless you God bless you God bless you🙏🏻🙏🏻🙏🏻❤️❤️❤️

@williamekia8811

2 жыл бұрын

Great

Thanks, my father in laws 2011 GMC Sierra (traction control system) is actually turning the truck off. Even when the truck is in motion which eliminated the power steering and power brakes which is EXTREMELY dangerous. The dealer said it needs a new ECM. This may be able to fix the problem, and naturally, the dealer would never tell anyone that this might work. Parts and labour up here in Canada is $1200. So we are going to try this. Can't hurt. Hope it works.

@donnielleross5357

Жыл бұрын

Did it work for you? I have a Canadian vehicle so I’m curious if that even matters

@spankyblack6119

Жыл бұрын

@@donnielleross5357 Hi unfortunately no I didn't work.

@precisiont5188

Жыл бұрын

I once trusted the Ford stealerships but after being lied to, taken advantage of, deceived, and ultimately being ignored after respectfully confronting them about their unethical behavior, I now know the Stealerships are sharks who overcharge, charge for work they never did, cover-up problems under warranty to avoid having to pay, do not do jobs correctly, etc. This unethical culture infects Ford from the top to the bottom.

@Bellathebear777

Жыл бұрын

Guvmint motors.....Imo .Lincoln Deserves that contract. .Gm never repaid that loan"""

@RosaDiaz-gammy2020

10 ай бұрын

So do I connect both of the positives to the battery post?

Great Video My 2010 Ford Fusion climate control was not working right would be stuck on defrost so I took it to a ford dealership and told me it would cost 1400 to replace the blend door actuator so I took it home and in 15 minutes I replaced it and it still didn't work until I saw your Video and I took both cables off and touched them together for a couple of minutes (Didn't have booster cables) My HVAC ACTUALLY WORKED all it needed was a reset THANKS you saved me big bucks

This is such an important topic and the explanation (method) is easy to replicate at home.Thanks amigo

Thank you man ,i stil have light on my dash panel , but this procedure definitely reset my computer , i will try solve the other problems

@richardmccormick859

3 жыл бұрын

So Jorge your check engine light still stayed on?

@pancholin1950

3 жыл бұрын

Remove the gas cap and check it for a bad gasket! If the cap is a ok. remove the ground cable for 10/20 minutes and allow the computer to reset!

@avokes6919

3 жыл бұрын

I got a cel after changing coil packs on my r34 and resetting my ecu

Thank you so much I did what you said and now it starts and runs-But I would ad one thing-I took both cables off OF THE BATTERY-and put the cables to each other-And, not on the battery-And turned on the headlights to help drain the power-My car would not start AT ALL before-I did not like the idea of hooking the power from the battery to the negative -I will remember this for ever-THANKS

Will this clear any engine light ? Recently replaced the valve cover gaskets and been having an issue with engine light staying on

Thanks bud my car is running great. Better than ever. Good video keep going.

Actually helped me so much Thanks for this, Got my car idling and running like new

@Devious-oh7tc

3 жыл бұрын

Was your car running with high idle??

@Stuckinthevoidlul

6 ай бұрын

@@Devious-oh7tcmine is and im about to try this possibly

(2005 Dodge Durango Limited 5.7 (AWD/4x4) Will my chipped key/fob combination be reset was well? I'm assuming so? I know how to program it however you have to have a chipped key to program another so if the answer is yes, will my key still start my vehicle?

Thank you I'm very grateful for that powerful knowledge thank you thank you so much I'm going to try this cuz I've been having trouble getting my car started

Thank you sir that really helped it runs better now than it ever did!

Well done mate. Works a treat. Thanks

Do you think this would fix hard shifting on my 2018 silverado

Had to watch 4 times to get my 20 minutes lol 😆

Thanks for posting this video

Ty I needed this. It was very helpful and worked on my 09 jk jeep wrangler

Does this make you have to do a drive cycle to get the catalyst monitor off after disconnecting the battery?

Would this work on a 2005 cadillac srx with navigation screen(factory)? It comes on when it wants to or the radio will come on once in awhile but not all the time. Also it idles real rough. Wondering if this would help?

Will it work on tata trucks ( super ace mini ) latest model

Will this work for my 2003 Mazda protégé5 The dealership said that it is the ECU and I need a new one for my car. Can I reset my old one and use it and save my money

@filipbronola536

3 жыл бұрын

If your ECU is shot, resetting it won't fix it. Although, there's no reason why you shouldn't try.

Needed this. Thank you.

Will this be ok , on a 1994 Fiat Cinqecento? This model is pre OBD2. And will this procedure not damage the unit. Many thanks

Brilliant video thanks for sharing. 👍🇬🇧

@GK7GARAGE

4 жыл бұрын

Thank you

God Bless you alot for this adds..I'm gratefull

Would this effect my remote start like reprogram ?

Can you do this to reset even the stepper motor sensor and speed sensor on a Nissan murano 2004 AWD?

Thanks mate all the way from Australia very much appreciated it

@GK7GARAGE

4 жыл бұрын

No problem 👍

Thank you so so so so so frigging much. I fixed my dad armada today and it worked wonders

@GK7GARAGE

4 жыл бұрын

Awesome

@peterizotov2493

3 жыл бұрын

What king of problem was it?

Great Video , thanks for the tip. Keep it up !

Sweet video thanks im new and hoping 🙏 for more

@GK7 DIY is a jumper wire the same thing as a jumper cable? My car came with a black jumper cable and a red jumper cable. I tried to use the black one like a jumper wire for the reset procedure

@bobbywayne3396

3 жыл бұрын

Yes

@actionjackson5143

3 жыл бұрын

Wow

@robertjensen2733

3 жыл бұрын

@@actionjackson5143 Now, be nice.

@actionjackson5143

3 жыл бұрын

@@robertjensen2733 this is next level shit right here💀🤡

@minervamercado7873

2 жыл бұрын

Grace, you only need one cable, if you use a black or red, just make sure its one cable, not both, your not jumping your car. If u use black then put the lead on the negative pole, and the other black on the positive pole, the same procedure. Doesn't matter what color.

Thanks for sharing your knowledge‼️🤙

I must admit i have a 2004 dodge ram 1500 5.7 an i took all the proper steps an i be dam if it didn't work you are the man

I was told you can just disconnect your negative terminal, turn your key to the on position, and hold the brake pedal down for a couple minutes and it should do the same. I have an 89 k2500 with the 5.7.L 350, going to try your method regardless but let me know if you’ve ever heard of that!

@tebzamoyaga6823

Жыл бұрын

I heard of it,tried it but it didnt work for me. My timing is jumpy so i was told ecu need to be reset to stabilize the timing. I will try this method

New subscriber thanks for sharing that info.. Good info to know 😊 Artie

Will this help is my 09 Traverse is throwing a P0116 code and giving the scanner far different temp readings? Thermostat is good, has new ECT module, etc. The local shop suggested taking it to a GM dealer to get the ECM looked at.

Would this work on a nissan versa? We have changed the ignition coil and spark plugs but now it wont turn on. Help!

Scitty Kilmer said a few things different: Any ideas why? 1) Disc Neg & turn on light switch 5-10 min, 2) Reconnect & put in low gear 5 min with foot on brake, 3) Drive 20 min around +35 not aggressive.

@tommygunn1130

2 жыл бұрын

Don't you also have to hop around the car 3 times on one leg while patting yourself on the back? What a load of horsesh*t!

@misternell09

2 жыл бұрын

@@tommygunn1130 That won't necessarily work well. You should follow it up by walking around your car backwards three more times while rubbing your stomach. 😉

I made a special jumper with alligator clips putting a 10 ohm 100 watt resister in series with the the jumper cable, adding protection and safety to protect the myriad of delicate complex programmable logic units modern autos have. I bought the 10 ohm 100 watt resistor and alligator jumper clips from Amazon. I used it to reset my wife's 2016 Cadillac SRX premium in operable electronic system. It drained the voltage of the electronic system from 1.2 voltes to 0 volts in 15-20 minutes. I would recommend using a voltmeter to determine when the transient voltage had been drained to 0 volts. To me the 10 ohm 100 watt resistor is a must.

Does this also reset the anti theft bc my 08 Chevy Colorado will not start and it was cranking when I replaced the starter

Amazing man thank you 🙏 you really help me

Good procedure but i would put a small 5w bulb instead of jumping the negative and positive terminals so it drains any caps slowly instead of shorting the system

@larrytemen4789

Жыл бұрын

It doesn’t short the system. With the ground removed and not connected to the battery, the circuit isn’t complete, therefore a short circuit is impossible to happen.

@MannyC711

13 күн бұрын

Just turn on your headlights for 5 min.

I have a 2012 Ford Fusion that i need the cluster replaced, if i do replace it will the vehicle need any type of reprogrammed?? Or just plug and play?

@YusufGinnah

3 жыл бұрын

@Jimmy S May depend on the car itself. My previous car, an Audi TT, needed the new cluster to be coded to the car after installation. 👍🏼

@YusufGinnah

3 жыл бұрын

@Jimmy S ahhh... Thanks cool 👍🏼

@robertcollins4580

3 жыл бұрын

@Jimmy S u do now that this year the computer control everything from brake to the steering sensitive which change depending on your speed

Excellent 👌 that's just the way it is👍

Will this work on a 2004 Dodge Neon SXT to reset the ECM

Can i try this way on Hyundai elantra 2009

great video and clear advice .

@GK7GARAGE

4 жыл бұрын

Thank you

If a Throttle Position Sensor is put on upside down will that mess up the ECM ON a 2004 Dodge Neon SXT

My cars faults and all dashlights have been popping up but i was told to take the positive cable out for 3 minutes or so to reset ecm??

Works great 👍

This worked for me. I had replaced the mass air control and throttle position sensor, and after that it was not idling right it was idling high, so I did this process, and it worked for a few days then I had to replace another sensor and then that corrected it.

@jimmyjimmy3253

Жыл бұрын

Buick???

@DrTech-pw2cu

Жыл бұрын

@@jimmyjimmy3253 Lincoln

@SugaDontPlay

Жыл бұрын

What sensor?

Thinking about getting a new pcm because my 2002dodge stratus wont fire after new spark plugs and new coil pack.will this start my car instead of having to get new pcm?

Do you think this would fix a fluttering fuel gauge in a 1999 Chevy Astro? Shop thinks it's PCM.

great video and relearn procedure!

Will this workfor 04 g35 coupe

Thank you very much for the info, it really works

I have a nissan pathfinder and I had to go get a new ECM/ECU from the junkyard. Would this method work for setting up a used part

Will this work for a 1998 Dodge Grand Caravan 3.8? Just put in a used computer need to program how?

@thekingsilverado9004

3 жыл бұрын

You have to make sure ya don't have any direct leads to the engine itself or the body. A lot of cars today are positive ground system which is fine but others like the Silverado's and Ford trucks it's a big no no. a lot of Domestic cars and trucks still have a frame ground system and those R the ones that it won't work with. Usually if ya see sparks ya know it's a boo boo...

@boarzwid1002

3 жыл бұрын

Did you keep the prom from the old computer and put it in the new computer

Awsome . Thanks mate

I have a 1992 corvette. I left the dome light on for two weeks NEW battery dead. I think the factory alarm is still activated still Will this idea work on a 92 vette?

Just replaced the battery on my 02 Silverado and the damn thing wouldn't stay running. Before I took it back to my mechanic I got on You Tube and found this video. To my surprise it WORKED!!. Truck runs great. Thanks for the info.

@GK7GARAGE

4 жыл бұрын

Awesome

If I have standard jumper cables, do you put red on Positive terminal and black on the Negative cable?

@tluns810

3 жыл бұрын

LMAO, that's funny right there, I don't car who yar.

@stevebutler812

2 жыл бұрын

I believe you had a serious question? He is just using the jumper cables as a jumper wire- same color wire just to close the circuit & drain the battery.