same problem on my 2011 Lexus LS460L,....replaced check valve......same end resuults.....thanks for your straight forward video....however found 2 valves for the price of $4.79....Amazon Prime Day.....lol...thanks again for the vid........dealer would charge an arm & a leg to do it.

This is a straight to the point informative video! I really wish most videos on KZread were like this! Solid!

@weldingandstuff

4 ай бұрын

Exactly

I have 2014 and I enjoy having these little problems because we all know that's about all ya get with a Toyota just little stuff I'll take all day long.

I tried to clean the clogged washer valve using baking soda and vinegar, and rinsed it with hot water. I installed again and It did not work at first. After I watched this video, I learned that I installed it in a wrong way. I follow the proper installation I saw in the video, and it is working now. Thanks.

Thank you so much for solving the problem with my washer nozzle 🙏

Thanks for this video. Turns out my shop installed the check valve backwards when replacing my hood so this helped me figure that out.

Useful! Did not know my Avalon had a check valve; thought it was a bad nozzle, turns out I was wrong. Thanks.

Thanks! I had a mouse open my washer tank and fall in (two, actually. I guess his buddy jumped in to save him and drowned too). Their fur eventually soaked off and clogged the check valve. I took the old valve off but neglected to note how it was oriented. Your video helped a lot. I put a screw on the washer lid to keep the mice out. Man, I hate mice.

sr. Thank you so much for this video . I was looking for a video like that many time . But finally I found . It was very useful for me.

Fantastic video. Showing how the check valve works and how it should be connected saved me time and money. My wife's car was in a minor accident and had to have the hood replaced. When they put it back together the windshield sprayer wasn't working but my wife never mentioned it. Months later I use the car and discover the problem. I determined that washer fluid was making its way yo the check valve then stopped. I thought I had a defected check valve but this video showed me it was just installed incorrectly. Thank you.

Great video!! Thank you. Toyota put that check valve in the WRONG direction. Everything works excellent now. Thank you!!!!!

Very helpful information! Thanks for taking the time to share it with us! Sincere regards!

Thanks for the vid. My tc works on both sides but has low pressure so this vid helped me on trying to figure out what’s going on.

I gotta do this to my Toyota Mirai. Video was most helpful! 👍🏼

@weldingandstuff

5 ай бұрын

Glad it helped!

The triangle arrow is the water inlet🙂

This Thing in my Prius 2013 was clogged thanks for the video ☺️👍

Nicely done; a good video of how to fix a minor, but it not obvious to many, problem. 😃👍

Thanks! Exactly what help I needed!!

Thanks for this. I thought one of my nozzles were bad, but it turned out it was the valve, just like yours, but just slow on one side. I ordered a replacement since they were only about $5 on ebay, but in the meantime substituted a "T" joint I had from another project. The T joint works fine, but it takes about 3 seconds for the water to start. Since I'm seeing so many of these fail on just one side or the other, I'm thinking of maybe leaving out the valve until the next time I have to fix something under there.

Thank you for your video..! For some reason (?) never noticed that arrow.... All ok now..!

Thanks

Thank you great vid fitted one today works perfect

Thank you for this my friend !!!

This helped out a lot! Thank you!

Nice video thanks for uploading.

Hi, Could the delay in the spraying of the washer on the driver's side be related to a malfunctioning valve?

@weldingandstuff

Жыл бұрын

Exactly, try spray with contact electric cleaner

@PanJarekKozera

Жыл бұрын

@@weldingandstuff Thnx

What size is it

Can you do a video on essential variables, tables ,and figures? Please

@weldingandstuff

5 жыл бұрын

I will be recording my class in a couple weeks; it will have the essential variables; give me a call Monday (832) 773-3956

@gsup3874

5 жыл бұрын

@@weldingandstuff Ok thank you

Hi. There are two connections at the side from where water flows. On your video it is not clear which one comes from the water pump and which from the right windshield nozzle. Could you please clarify?

@weldingandstuff

4 жыл бұрын

My water comes in from the left side; the fitting will have an arrow showing water flow direction

@horasval

4 жыл бұрын

Welding and stuff This is what I say. There are two connectors at the left side. So one is the intake and the other is out. Sorry for possible misunderstanding.

Toyota wants to charge me $150 to do this? 😂😂😂

Could have just cleared the clog.

Hey man, thanks so much!!! The dealer wanted to charge me $87 for a $12 part and labor, lol. Laughable!