Wow this is the only time I’m grateful to live in tri cities wa, so I can drive to get that glue. Thank you for putting this out here for free! I have to redo my rv roof inside and outside. This was v helpful

@JaydonRose

2 ай бұрын

Tri cities,... I use to live there, now live in The Methow Valley but may also have to drive to La Grande.

Hello, Part 1 has been very helpful! Thank you. When will you post Part 2? I’m dealing with this exact repair and could use the installation process knowledge :) thanks, Chris

Did my pulldown and prep work getting materials together for new panel install. Would love to see your video of new panel install every bit of information helps. Thank You for sharing.

Are you going to upload new videos on the progress of the Lesharo...? Hoping all is well in business, family and health 🙂👍

Cool video. Love the explanation of how it's made and works. Will part 2 be coming soon? I'm guessing load stabilizer bars (also called ratcheting cargo bars) would work great to hold up the panels as the glue cures. Have a good one!

Hoping you’re doing ok. ❤

I just ran into this same problem. I couldn’t believe the lack of structure in the ceiling

Thanks for the vid. This sounds like a pain in the ass but necessary

Thank you for sharing this!! So the styrofoam in my ceiling has bad water damage and needs to be replaced too. With how soft the ceiling is pretty much throughout, I’m under the impression I’ll need to replace all the styrofoam and paneling. Any suggestions? I’d be glad to email you photos if you’re open to it!

Hi great video ! Good work ! What is the name of the glue ? And what kind of panels did you use for the new paneling ? Thanks you will have a new suscriber 👍

Where can I get white replacment celling sections. I had a leak and one has a small ripple in it.

Cool video. I'm looking to raise my le sharo roof. I was looking to your video to see the structure of the roof/wall to be able to plan a little before tearing my le sharo down. Any comment/idea/suggestion regarding my project ?

@thesetwohands6982

2 жыл бұрын

I haven't removed a a roof on a le Sharo in particular but almost all roofs are put together in a similar fashion assembled and glued to gather on a table jig then hoisted up and screwed down from the top side and covered with a roof skin, epdm rubber, vinyl, or in this case aluminum. you have to remove that layer first then there should be screws around the perimeter holding it to the top of the walls. the good thing about aluminum metal roof is that it can be reused the others are glued down and are destroyed in the removal process. DON'T glue the metal down when reinstalling you will have horrible problems just let it float. I don't think there are any screws inside with the exceptions of cabinets on the le sharo I will look today and double check if I am wrong I will get back to you. here is a link to a landau motorhome I did several years ago removing the whole roof. scontent-sjc3-1.xx.fbcdn.net/v/t31.18172-8/18359160_1549571768418840_6047951802021598782_o.jpg?_nc_cat=111&ccb=1-7&_nc_sid=cdbe9c&_nc_ohc=r9vzqPk-gcsAX9QRUSQ&_nc_ht=scontent-sjc3-1.xx&oh=00_AT8GOFjp_ZPXCauC2YyLvG0lgl00-0fw3GwaynPHNUym1A&oe=62DA3218 its on my Facebook business page there are a couple pics. you will need to build a support system to then hoist the roof off so it doesn't buckle they aren't that tough to stand the weight on their own. although the Le sharo is pretty small and 4-5 guys could probably just lift off and support it. the one I took off was 36 feet long. and i did it with one other guy. if you have a good knowledge of how to fix things structurally I would say get after it. is it a project for someone like my wife NO! even though I would say it is simple, its just lots of labor. I just finished installing the ceiling panels from the inside which I will be posting in about a week. sorry about the book let me know about any questions you have would be happy to help.

Do I have to do the complete strip down ? If I'm not covering damage just want to change to a wood paneling.

@thesetwohands6982

Жыл бұрын

if you are replacing paneling yes. you have to strip all the way down so the glue will adhere properly

I am doing this on my toy hauler and had some questions for you is there a way of getting ahold of you by chance?

Didnt know you can order panels for rvs, my parents 99 fleetwood prowler has saging ceiling panel in the living room from water that got in somewhere from the roof, its not too bad but had to drill half inch hole to let the water out of it or would had been much worse then it is, eventually going to get new tpo roof put on it but I guess you can get certain similar panels at home depot that will work but the mat paper not sure how that would work? but how would I go about getting panels for the rv? I know that fleetwood trailers are made in oregon which is where this came from originaly, what is your advice to contact fleetwood see if they have panels to fit this 99 prowler or just try to buy the materials & build one to fit? I noticed back bedroom also had gotten little water damage to corner wall area where night stand is bout almost foot in height the panel is week on bottom & wall paper is just bit wrinkled so its not anything too severe but I am sure I will find some damaged roofing deck once the rubber membrane is removed especially in front right corner of rv where water got in the size of a basketball that ultimately caused the ceiling semi bow down the rain actually filled the light bowl fixture in the livingroom crazy how this all happened..

@thesetwohands6982

2 жыл бұрын

Well I am originally from Lagrande or and Fleetwood went out of business. So there is no contacting them. But if you go to an rv dealer and find a new rv ceiling panel that matches closely to what you have and ask them to order the ceiling panels just tell them you have that type of trailer and they can order them if their not too lazy. But shipping is super high right now. A home depot panel will be hard to match up. Since you have to do the roof anyways and replace some sheeting. You do all of it from the top. Pull rubber, and bad sheeting then pull up rafters and rebuild rafters with ceiling panels stapled and glued. And set whole assembly down on top of the sidewalls and you can't tell you did a panel replacement. It really doesn't add any time to the project and is easier than putting panels up from the inside and having to mold all your seams.

@BurtBowers

2 жыл бұрын

@@thesetwohands6982 Yes thanks much for the advice, I will see what I am up against once I get the top decking off hopefully there is no major obsticles in the way that keeps me from getting to the ceiling panel, its not an eye sore way it is now has very slight bow to it but if I can get the similar matching panel I would try to remove old one, thanks much again I will be talking to my local rv supply store on the panels👍

Great video..is there a part 2 coming up?

@thesetwohands6982

Жыл бұрын

Yes it's been a crazy busy summer. All the footage is filmed I just need to edit and post. I'll try to get it done next week. I apologize for neglecting my channel.

@roxannfenske7375

Жыл бұрын

@@thesetwohands6982 I am not finding part 2. Is it named differently?

I have a small 1 foot by one foot area of water damage inside one of my cabinets what would be the fastest and easiest way to fix it without tearing off any outside panels or taking the cabinet out?

@lextown3225

9 ай бұрын

Stop the leak asap

Do you use the same glue for a delaminating exterior. I’m working on rebuilding the front left wall on a 2007 Chalet Takena as well as the ceiling around the skylight in bathroom.

@thesetwohands6982

Жыл бұрын

yes that glue is great for all materials it's just expensive. I have had family trouble for a while and am moving my shop to another state so I apologize for late reply and lack of footage to continue the repair series.

@jgardner7804

Жыл бұрын

@@thesetwohands6982 thank you for your response. I live in TriCities,Wa. so not that far from Artic Fox. I did reach out to adhesive company and like you said had no knowledge of that product. Is there a specific name of product if I call Artic fox.

@thesetwohands6982

Жыл бұрын

@@jgardner7804 honey glue. I am moving my shop back to La Grande OR still in the process. it may take me a bit but if you have more questions just ask I'll get back to you as quickly as possible.

An antenna was removed from my rv roof and foam filler used to fill the hole! What can I do to prevent leaks and restore the integrity of the roof and ceiling surfaces?

@thesetwohands6982

Жыл бұрын

well if you have a metal roof use elastomeric roof seal it will last the longest and is applied with a paint brush. if rubber use dicor sealant. if there is a hole on top and you have a metal roof clean thoroughly apply sealant on top and bottom of aluminum patch drill and rivet to the roof then seal over the top. just don't let water in or it becomes a long terrible repair.

Hello do you have any spare lesharo cv axles? I can’t find any replacements. Or do you know any place to get them? Thanks

@thesetwohands6982

2 жыл бұрын

do you have the originals? if so take them to Carquest and they can send them out and have them rebuilt. if you don't then that's gona be a tough one. I don't have any I had mine rebuilt by Carquest.

@paulmarado

2 жыл бұрын

@@thesetwohands6982 I’ll get a hold of car quest thanks

What year and camper is this

Is there a Part 2 video?

@vitbing

5 ай бұрын

Great prep on the ceiling , im anxious to see the panels instaled , Im right where he left off with his project . were hoping :)

No part 2? 😭😭😭

Where is part 2 of this work?

Do you have social media? I have a few questions about caulking. Just subscribed also!

@thesetwohands6982

Жыл бұрын

I do but if you have questions just ask away. Sorry for being late to respond farming stuff before winter is closing soon.

@briizcustoms9543

Жыл бұрын

@@thesetwohands6982 What’s the best caulk to use ? There’s so many brands

@thesetwohands6982

Жыл бұрын

@@briizcustoms9543 outside caulk is geocel 2600 vehicle body sealant is by far the best. I order mine from arctic fox. For rubber and vinyl roofing use dicor please don't use flex seal! Also clean all your sealant surfaces with an enamel reducer is best I use dupont 3812s. Acetone will work as well. And don't mix sealants some have trouble sticking to each other.

@briizcustoms9543

Жыл бұрын

@@thesetwohands6982 I have an aluminum roof, I want to seal the seems and windows. I can use geco gel for both?

did you ever finish the part 2

@thesetwohands6982

Жыл бұрын

I have had family trouble for a while and am moving my shop to another state so I apologize for late reply and lack of footage to continue the repair series. I have the footage recorded just have to edit but need to get to new place b4 I can post.

WHERE CAN I ORDER REPLACEMENT CEILING PANNELS FOR JAYCO RV??

Where is the next video?

@thesetwohands6982

Жыл бұрын

Oh I'm sorry I have all the footage filmed I just need to get time to edit I will get it finished soon. It's been crazy busy summer. I will have it finished next week. I apogize for neglecting my KZread channel.

@lindaclayton9302

Жыл бұрын

@@thesetwohands6982 Waiting on next video. Please upload

@sylvainetemilie

11 ай бұрын

Me too

@karinaojeda3977

4 ай бұрын

@@thesetwohands6982 same here, a year later and still waiting

Tough to watch man