How to Replace Wheel Bearing and Hub Assembly 2004-2009 Toyota Prius
Автокөліктер мен көлік құралдары
Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHF00235
This video shows you how to install a new wheel hub and bearing on your 2004-2009 Toyota Prius. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2004 Toyota Prius
2005 Toyota Prius
2006 Toyota Prius
2007 Toyota Prius
2008 Toyota Prius
2009 Toyota Prius
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obro/1AXAA00013
• Pry Bar 1aau.to/oXs/1AXAA00020
• 10mm Socket 1aau.to/objH/1AXAA00017
• 14mm Socket 1aau.to/obEL/1AXAA00015
• 17mm Socket 1aau.to/obEL/1AXAA00015
• 21mm Socket 1aau.to/oanw/1AXAA00043
• 30mm 12-Point Socket 1aau.to/oad/1AAST00002
• Brake Caliper Hanger 1aau.to/ojC/1AXAA00439
• Ratchet 1aau.to/obIw/1AXAA00016
• Socket Extensions 1aau.to/obEL/1AXAA00015
• Torque Wrench 1aau.to/oaMB/1AXAA00044
• Anti-Seize Grease
• Gloves 1aau.to/oanZ/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack 1aau.to/oabK/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oYH/1AXAA00065
• Punch
• Wheel Chocks
• Wire Brush 1aau.to/oud/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 16
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
My man, naming the torque specs in the video as he goes! That's excellent detail. That's an important detail that's missing from most tutorial videos.
Thank you. I was about to order the part, a little cheaper from another supplier, but as you went to the trouble of doing this helpful video, I ordered it from you instead. Thank you.
As a 33 year veteran tech, I DO NOT recommend smacking a ratchet handle with your hand. _Not to sound preachy_ , but you can't buy a new hand......
Those are some pretty fancy brake discs for an old prius! :D Seriously though, great clear high quality tutorial. We get so much rust up here that the whole thing might disintegrate if I start hammering on it, though.
Tried this way and beating broke apart. Had to buy new knuckle as part was so corroded and seized. Wasn’t worth the time to try to remove, which I did, but to no avail. Learned little about Toyota Prius. I think I’ll buy another! Good luck everyone!😅
Thanks for the quick video! Ended up having to take my spindle off and use hydraulic press to get hub assembly out but that's how it goes some times.
great vid, also like the use of Milwaukee ratchet, one of my favorite tools
Great vids. Always helpful. My favorite part was the spider crawling at the top of the knuckle right after you knocked out the hub assembly.😅
That cut at 5:00.... might have been hours of hammering...
Watched a few times. Cheers
Just perfect
Excellent video. Thanks!
I have problems with the minute 7:00 . I think the shield is causing noise with the axle. Is it possible to drive without the shield? I can't seem to put it back correctly
Thanks
That's one rusty ol girl