How to Replace Water Pump 2008-20 Dodge Grand Caravan
Автокөліктер мен көлік құралдары
Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00207
The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind. This video shows you how to install a TRQ water pump in your 2011-17 Dodge Grand Caravan.
• Buy TRQ at 1AAuto.com: www.1aauto.com/yt/i/1AEWP00207
• Check here for more videos on the 2008-19 Dodge Grand Caravan: • Dodge Grand Caravan 20...
This process should be similar on the following vehicles:
2008 Dodge Grand Caravan
2009 Dodge Grand Caravan
2010 Dodge Grand Caravan
2011 Dodge Grand Caravan
2012 Dodge Grand Caravan
2013 Dodge Grand Caravan
2014 Dodge Grand Caravan
2015 Dodge Grand Caravan
2016 Dodge Grand Caravan
2017 Dodge Grand Caravan
2018 Dodge Grand Caravan
2019 Dodge Grand Caravan
2020 Dodge Grand Caravan
Tools you will need:
• 10mm Socket 1aau.to/oaFt/1AXAA00017
• 13mm Socket 1aau.to/oaUF/1AXAA00015
• 16mm Socket 1aau.to/oaUF/1AXAA00015
• Trim Tool Set 1aau.to/oQq/1AXXX00006
• Hose Clamp Pliers 1aau.to/odP/1AXAA00076
• 3/8 Inch Drive Ratchet 1aau.to/oaUF/1AXAA00015
• Ratchet 1aau.to/oa9o/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oaUF/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oafE/1AXAA00044
• 3/8 Inch Drill Bit 1aau.to/oao/1AXAA00092
• Gloves 1aau.to/osb/1AXSS00048
• Safety Glasses 1aau.to/onj/1AXAA00343
• Drain Pan 1aau.to/or9/1AXAA00320
• Floor Jack 1aau.to/oMh/1AXAA00068
• Jack Stands 1aau.to/oJz/1AXAA00065
• Razor Blade / Gasket Scraper 1aau.to/ogt/1AXAA00280
• Rubber Mallet 1aau.to/oez/1AXAA00413
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Dodge Grand Caravan 2008-2019 5th Gen: • Dodge Grand Caravan 20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 97
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
Man! You Are Thee Best Mechanic I’ve Ever Had The Pleasure Of Watching! ⭐️⭐️⭐️⭐️⭐️
For anyone wondering this works on a 2008-2014 Dodge Avenger 3.6L thanks for the great video!
This is the best auto repair video I have seen on KZread. Great work, well done.
Absoulte best video EVER. He even shows the proper torque settings. It worked exactly as shown on my 2012 T&C.
Yea it's great if you own a car lift.
Thank you for this video. I followed it step by step.. replaced the water pump, thermostat, idler pulley and drive belt on a 2012 VW Routan SE on 12-29-2020. Your video is excellent. Thanks again!
@TRQ
3 жыл бұрын
+[OGC] IKILLFOOLZ Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Great information. I just replaced the water pump in my 2017 Journey. In my vehicle, the top mounts were much easier to remove. I did have an issue where just removing the top mount didn’t give me enough clearance to remove and install the pump, I additionally had to loosen the lower center mount bolts, (located center of vehicle, just behind the front bumper), to get enough clearance to swap out the pump. To those asking about the upper mounts and the idler pulley, the upper mount bolts run through the pump housing, the idler pulley does too. Might as well replace them while you’re at it. Removing the thermostat makes life dealing with the upper mount and the serpentine belt much easier, replace it too.
It's a pleasure to watch this guy work. Thanks for the great video, couldn't have done the job without it..
This is Soo good I watch his videos for all my car issues 😢
Nice thorough, detailed video! Thank you!! Great job!
Thank you so much Finally I replaced my water pump under your guidance
Outstanding your showing good practices and of course experience. Very thorough.
Thanks! This was exactly the video I needed.
The best video I've seen so far. Awesome Job!!!!!
This is for 2011 & newer 3.6L Pentastar engines
Just purchased a 2014 Town&Country 2 weeks ago and yesterday it overheated. When it cooled I checked the radiator and was empty or very low. Was dreading the water pump fearing it was a timing belt driven internal unit and was ready to junk the van. Watching this video took all that dread off and am ready to tackle a normal repair job thank goodness! Pink antifreeze? Same as what I use in my Cayenne? All aluminum engine? Asking because I have several bottles of that left over still.
Your videos are so thorough! Another great tutorial for the diy! Thank you for sharing your knowledge!
Great video, help me out getting a handy lift van back in service for our city.
@TRQ
3 жыл бұрын
+Orion59 Thanks for the feedback! 1aau.to/m/Shop-TRQ
Great video well explained i will definitely try this now I've seen your video thanks.
Best ever video for sure. Going to save me mega time. This guy's a real Pro. Thanks so much! Dean
Thanks so much for the video very professional ☺️
That was awesome instructional. Great job.
That was very instructional, thank you
Awesome video, thanks
Great job. The only thing I question is mixing the coolant. Mopar pink coolant should have been used for the top up.
Thanks for a video was very helpful, I just took drain plug all out and lost the O ring 💍 in the fluid 😂 so I has a pretty good leak good thing I found it
Thank you. Merry Christmas and Happy New Year! Please stay safe and well. Matt Vea
Worked like a charm lol 2014 Ram C/V Tradesman she's purring like a kitten now 💯🔥🤙
great video
Hey... Great Vid. You are a Natural Instructor - - - I really love that tool that U hav2 release the Hose Clamp's. Thanks 4 making. LJR-III
ATTENTION VIEWERS: This is NOT for Grand Caravan 2008-2010 like the TITLE suggests. This video is for 2011 and newer 3.6L ONLY. The details in the video desc are correct, but the title is very misleading.
@TRQ
3 жыл бұрын
+NorthernChev Thanks for the feedback! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
Excellent Video 👍
EXCELLENT! video, brother ~ You're good!
JESUS, you make the work so easy, thanks. How much experience do you have???
I must say this is probably one of the best informative well explained videos I have seen . Great Job I look forward to watching and learning more from your content . Thank you for sharing your knowledge
sir, your video is great, could we reach the upper bolts of the water pump and remove them without removing the engine mount? Also, I noticed you remove the jack down the oil pan during your work with removing the old water pump and putting the new one. I think we should keep the jack hold the engine till the last minute, is that correct?
@matthewcampanile6193
3 жыл бұрын
Looks like he let the motor drop to give him more room for the water pump! I’m sure that was the purpose of removing the water pump!
Thanks...Getting to the point..
Isn't that the oil pan?
This is a nice video. What essentially did not come into play until 2012. This procedure does not work from 08 to 11.
Could you put a name and part number for the hose clamp tool and the anti freez fill kit? I have never seen one and would get it if I knew more about it. Nicely done!
@TRQ
3 жыл бұрын
+Vicki Chamberlain Thanks for watching! We carry both of those parts. Please check out www.1aauto.com and search by these part numbers: 1AXAA00116 (coolant fill kit) and 1AXAA00076 (clamp tool).
Excelent. Very tanks
do the belt tensioner need to be replaced top?? since is disassembling the whole lot there
Do you have to pull the harmonic balancer?
Good job how much time did it take you for the whole job
What about the rubber washers on the bolts? You reuse these?
Great instructional. Thinking of replacing mine soon on a 2010 Grand Caravan SXT. How much labor are we saving here in dollars so I can tell the wife. Lol, I know.
Thank you for this video. It is very helpful and very well made.
Is this the same process for 2009 volkswagen routan
@TRQ
3 жыл бұрын
+justin bouy This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ
Why do you need to remove the engine mount?
Does anyone know if a video exists for the dodge grand caravan 2010 3.8 liter.
Can I remove the water pump without removing motormouth.?
What is the name of that awesome hose clamp tool and who makes it? 😍
@LesterB313
2 жыл бұрын
You can get one from Autozone OEM is the brand. Just bought one yesterday.
Make sure you put the proper antifreeze G05 for the Chrysler.
I have a 3.6 2013 town and country I am hoping dis works fo me as well
@TRQ
2 жыл бұрын
+Mr_420 Playlot 3 Thanks for watching our video! 1aau.to/m/Shop-TRQ
The years listed in the title are wrong! Title says 08-20, although the description says 11-17 which I suppose could be correct. I've been very confused looking at different videos and my van until I figured this out. I have an 08 and it is definitely different.
Would this apply to a 2017 Pacifica 3.6l touring as well?
@GarageWorx
2 жыл бұрын
I dont see why it wouldn't.
what is the cost of labor to put the water pump
What’s the labor time For This job
Is that a 2008/ 2010 3,3liter Dodge caravan,please? It looks different from 2009 caravan
The jack (or some type of support for the engine) should stay in place at all times
Good video but what about the poor guy laying outside on his back without a rack .
@NorthernChev
3 жыл бұрын
The use of a rack was to make filming easier. This is done exactly the same on the ground. This isn’t that big of a deal in a driveway.
Very good video. But please include the engine size in the title.
@TRQ
3 жыл бұрын
+33ad1 Thanks for watching our video! 1aau.to/m/Shop-TRQ
@IKILLFOOLZOGC
3 жыл бұрын
3.6L Pentastar V6 with 6 speed auto stick 62TE transmission.. Dodge grand caravan,Dodge avenger, Chrysler Town & Country, Chrysler 300M and VW Routan, I highly recommend using OEM parts from the Chrysler dealer.. especially thermostat
i dont know why you remove the transmission mount if you do all the work underneat the car it does not make no sense to me
Don't forget to unhook the battery before starting
I dont see why you remove the upper engine mount it's not even in the way???
@462ANIMAL
3 жыл бұрын
He removed the upper mount so that he could drop the engine a bit to gain access to the pump.
Changed my water pump and now it cranks bit doesn't start
This is not the same procedure for the 4.0 engine
08 waterpump is different. does not have pulley on it
this video does not apply to the 2008 -2010 4.0L V6 engine version..
Your title says 2008-2020 Caravan and it is only for the 2011-2020 models. I have a 2010 and the water pump does not look anything like this one. It is much smaller.
He didn't show one thing and that was removing the piece of hose and closing the plug up
Watched half of the video before realizing this isn’t the video for a 2010 Caravan water pump. 2010 Caravan water pump is half the size of the one in this video that claims to be for 2008-2020.
@TRQ
3 жыл бұрын
+Patriot Parody Hello, thank you for letting us know we have since updated the years this video is for.
@wowamaze9407
3 жыл бұрын
Also not for 2008 Grand Caravan 3.3
@Abcdefghi4093
Жыл бұрын
@@TRQ No you haven't.
NOT same as 2008 Grand Caravan 3.3 L. Plus your years in description are different from years in the title.
@joehealey9173
2 жыл бұрын
I did not realize that is what they are used for. I thought thier purpose was to center the bolt on the hole so the pump lines up correctly. I bought a new pump from Napa made by Gates and the holes for the bolts were slightly larger in diameter than the factory pump. This caused those spacers to fit very loosely. Any thoughts ?
That's not an 08 grand caravan They ARE NOT THE SAME
grand total? 550 freaking dollars!!! the mechanics are losing money as they SHOULD for the way they price "based on how hard the job is" as apposed to the fact that they are there to WORK... ALL the day, REGARDLESS of what is before them. So if there are 5 "easy" jobs, or 1 hard one, the time youre at work is the SAME. these mechanics need to be based on hour rates. BUT EVEN THEN they are gonna rip you off by charging long... THIS IS WHY KZread SHOULD BE GIVEN AN AWARD for their assistance in helping us dodge these freaking rip off people. I was charged hundreds for replacing the thermostat housing! I didnt know my wife had them do that! PLEASE EXPLAIN AWAY, where 100 bucks was needed to be charged for changing a thermostat housing!?
yeah....that has nothing to do with a 2008 Dodge - Completely diferent....
Literally none of this applies to a 2008, get your years right.
@kristopherhasenbuhler5393
3 жыл бұрын
I thought he said 2011 to 2017🤷♀️
Great video. Thanks