How to Replace Water Control Valve 2004-2009 Toyota Prius
Автокөліктер мен көлік құралдары
Buy Now!
New Heater Control Valve from 1AAuto.com 1aau.to/ia/TYHCM00002
This video shows you how to install a new water control valve from TRQ on your 2004-2009 Toyota Prius.
This process should be similar on the following vehicles:
2004 Toyota Prius
2005 Toyota Prius
2006 Toyota Prius
2007 Toyota Prius
2008 Toyota Prius
2009 Toyota Prius
Tools you will need:
• 10mm Wrench 1aau.to/o2d/1AXAA00010
• 10mm Socket 1aau.to/obkt/1AXAA00017
• 12mm Socket 1aau.to/obFP/1AXAA00015
• 21mm Socket 1aau.to/oaof/1AXAA00043
• Trim Tool Set 1aau.to/oahX/1AXXX00006
• Hose Clamp Pliers 1aau.to/ogm/1AXAA00076
• Ratchet 1aau.to/obJk/1AXAA00016
• Socket Extensions 1aau.to/obFP/1AXAA00015
• Torque Wrench 1aau.to/oaNx/1AXAA00044
• Gloves 1aau.to/oapj/1AXSS00048
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oacz/1AXAA00068
• Jack Stands 1aau.to/oZm/1AXAA00065
• Pick 1aau.to/oSR/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 6
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
Oh man, this video gave me a laugh. That rust bucket looks like a nightmare to work on, but you gave it an A-grade repair. Awesome job!
Wow tro you are good thanks good video 👍🏻
What's the reason for changing this part???
You don't have to do any of this If you just undo the inverter you can leave the orange plug in undo the three main bolts on the inverter that hold the case and you'll be able to push it back into the side just a little bit maybe an inch then you can reach down and slide your clamps off your water control valve undo the water control valve and up it comes no headlight removing none of that business The water control valve has nothing to do with the hybrid battery that is 12 volt only If you want you can undo the orange movable heavy wires at the back of the inverter You don't need to undo the safety plug You just going to undo those so you can move the inverter for a couple for a few minutes car is going to be off with the relays closed and the remote 15 ft away so there'll be no call for HV power to leave the relays and head to the front of the car to the inverter All that's going to be off this is like a 30 minute job
You guys must be in a really salty area… that’s the rustiest yota I’ve seen in quite awhile!