How to Replace Inverter Water Pump 2004-2009 Toyota Prius

Автокөліктер мен көлік құралдары

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00297
This video shows you how to install a new inverter water pump from TRQ on your 2004-2009 Toyota Prius.
This process should be similar on the following vehicles:
2004 Toyota Prius
2005 Toyota Prius
2006 Toyota Prius
2007 Toyota Prius
2008 Toyota Prius
2009 Toyota Prius
Tools you will need:
• 10mm Wrench 1aau.to/oZ9/1AXAA00010
• 10mm Socket 1aau.to/obkq/1AXAA00017
• 12mm Socket 1aau.to/obFK/1AXAA00015
• Trim Tool Set 1aau.to/oahU/1AXXX00006
• Hose Clamp Pliers 1aau.to/ogj/1AXAA00076
• Ratchet 1aau.to/obJg/1AXAA00016
• Socket Extensions 1aau.to/obFK/1AXAA00015
• Gloves 1aau.to/oapc/1AXSS00048
• Safety Glasses
• Drain Pan
• Pick 1aau.to/oSP/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 26

  • @TRQ
    @TRQ8 ай бұрын

    √ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

  • @tashaviaf
    @tashaviaf6 ай бұрын

    I'm not very mechanically experienced, so I've watched every KZread vid I could find on this repair - this is the best video. Clearly showing what you're doing, indicating the socket sizes needed for each part, and you show that it can be done without complicating things like taking out the headlight/bumper if you can fit your hands. Thank you!! About to do this by myself tomorrow on my beloved 2008, Chippy

  • @TRQ

    @TRQ

    6 ай бұрын

    +@tashaviaf Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

  • @Stuffandfangs
    @Stuffandfangs2 ай бұрын

    Did this myself after watching the video. Some tips : get long needle nose pliers and those hose pliers seen in the video at a local auto part store. Secondly, put the screws into the pump housing before putting it down into place because it’s hard to get hands down into the work area to put them in by hand, you’d need magnetic sockets or something similar if not. I had the P0A93 Code and this replacement fixed it on my 08.

  • @anthonyguilian5203
    @anthonyguilian52032 ай бұрын

    You sir are the Bob Ross of mechanics 😂not sure how you’re not swearing and throwing wrenches 😂 Thank you for your very helpful videos.

  • @RphC74_mo
    @RphC74_mo19 күн бұрын

    Thanks for making this vid, by far the best one I’ve seen! Of all the steps, the hardest one for me was removing the bracket bolt that attaches to the body. A power ratchet was a huge time saver. Also, I sprayed silicone grease on the hoses to make it easier to install the hose clamps

  • @Mateus-gt2iq
    @Mateus-gt2iq2 ай бұрын

    Thanks man! For anyone who needs to replace the water pump, is exactly how described in the video. Make sure you have a sufficient long drill bit extension... 10mm and 12mm is enough, and take extra care with the power cables: make some pressure on the top and them start to swing until its realesed God bless you, very helpful 🙏

  • @billfinch1118
    @billfinch1118Ай бұрын

    One note for anyone who might try this. If you get the aftermarket upgraded Dorman replacement pump, it is about 50% taller than the OEM part. While I was able to pull the old pump out without too much trouble, getting the new one down through that tight space proved to be absolutely impossible. I ended up pulling the bumper and headlight assembly and installing the new pump through the headlight opening. Made a somewhat simple job a lot more cumbersome… Thankfully the stud that broke off in the video was fine on my car… 😁

  • @TRQ

    @TRQ

    Ай бұрын

    +@billfinch1118 Thanks for the feedback! 1aau.to/m/Shop-TRQ

  • @richardwernst
    @richardwernstАй бұрын

    Excellent, thanks. No fiddling with removing engine mount bolts.

  • @markfitzy.86
    @markfitzy.869 күн бұрын

    Great video mate thanks

  • @arnoldramos39
    @arnoldramos398 ай бұрын

    Great video thanks 👍

  • @eugenevosko7832
    @eugenevosko78324 ай бұрын

    Thank you! Looks like easy task!

  • @randallstewart8487
    @randallstewart84876 ай бұрын

    Thanks for the video,thats not a bad job at all!

  • @richardwernst
    @richardwernst26 күн бұрын

    Fabulous, thanks again, all done!

  • @JeremiahRomeo
    @JeremiahRomeo11 күн бұрын

    I put a new pump in and it is making a noise, sounds like somethings not right. Do you know what it might be? Thanks a lot for this very helpful video.

  • @rrodgers3285
    @rrodgers32855 ай бұрын

    Great bleeder tip thx

  • @jorgemora7190
    @jorgemora7190Ай бұрын

    Very good job thanks

  • @eugenevosko7832
    @eugenevosko78324 ай бұрын

    @TRQ Thanks for the video! While replacing the pump does the coolant drain completely or partially?

  • @bparth1896
    @bparth1896Ай бұрын

    Thanks for the video! Will you need to add and/or bleed coolant after doing this?

  • @knucklehednation
    @knucklehednation24 күн бұрын

    Is there a fuse/relay to check before installing the pump? I've been trying to locate the fuse/relay that powers the inverter coolant pump.

  • @crabbylion7971
    @crabbylion797116 күн бұрын

    Why did you have to get to the battery in the back to install the pump in the front?

  • @strouja
    @strouja3 ай бұрын

    thanks for sharing this, I have error code P0A93 in my 2004 Prius which I think this means I need to replace this inverter cooler water pump

  • @bevs9995
    @bevs9995Ай бұрын

    I just changed my Inverter Coolant pump and the check engine lights went off. But just a week later, after minimal driving, the check engine light came back on but this time it says its my Air/Fuel Ratio Sensor Bank 2 Sensor 1. Could this have anything to do with the Inverter Coolant Pump? Maybe its poor quality? The prices for the pump range anywhere from 25 to 150 dollars..... Could I have got Coolant where it shouldnt have been, like the electric wires of the plug that clips into the coolant pump??

  • @whatever465456
    @whatever465456Ай бұрын

    Why does this pump need to be changed? The problem with my prius is that the Air conditioning is cooling at 30-40 km/h driving speed but not cooling when the car is stationary.

  • @SalandFindles
    @SalandFindles2 ай бұрын

    Was that car at the bottom of a lake? lol

Келесі