√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

OMG, , you do NOT need to remove the steering wheel. These guys are nuts. I have a 2008 F150, found another video that showed replacing it without removing the steering wheel, I just finished doing it, took 15 minutes. I can't believe I almost followed these instructions... lol

Just attempted a spark plug change on a 07 Ford F150.....and I'm proud to say.....I GOT 4 OF THE PLUGS CHANGED!!!.....hey...baby steps...but at the same time cause of this video....I was able to change out that lever in 10 minutes flat.....THANK GOD!!!.....AND THANK YOU...

I am very happy with 1A auto because you stand behind your products with how-to videos and great parts. I replaced my 2004 f-150 multifunction switch with no issues. Thanks, JG

I think this video just saved me several hundred in labor costs. You guys make this stuff seem so much easier than it first appears to be. Will be buying the part from you guys here shortly as thanks for the freely given education.

@1AAuto

6 жыл бұрын

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@jamesbaucom9295

6 жыл бұрын

1A Auto Parts Part has just been ordered. What gets me is the dealer wants $156.29 for the exact same part and they wont even tell you how to install. Keep up the good work fellas!

Just finished this job. I took my time and it took about an hour since it was my first time through. My 2006 was similar although the connections on the switch were slightly different, it was still nearly identical. I didn't have a spring in the switch although the switch and mounting bracket had 'nibs' for a spring to centre on. I don't know if I ever had a spring but I could find none that fell out and there was none in the old one. The new switch operates as the old one...minus the glitch it on the right turn signal...so I think all is good. Great video which I followed step by step using an iPad in my truck as I worked. I did not have or need a wheel puller...just give the wheel a good yank at top, bottom,right,left and repeat until loose, it won't take long.

@1AAuto

7 жыл бұрын

+ibajs2 Thanks for watching. If any of our viewers needs to make this repair, we carry the replacement headlights shown in this video on our website. Here's a link to them www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZread&CTA%20Comment&ATony

Thanks 1A Auto Parts! Just replaced the turn signal lever on my 06' F150. This video guided me through the entire way! Excellent! It's only fair to buy parts from 1A Auto after they share their knowledge and experience to help people out! Thumbs up!

@1AAuto

7 жыл бұрын

+Eduardo Gallardo Thank you for the support; we love hearing back from our customers! Thanks for watching. If any of our viewers needs to make this repair, we carry the part shown in this video on our website. Here's a link to them www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZread&CTA%20Comment&ATony

@bigchief8590

6 жыл бұрын

Is there a video how to diagnose my stuck turn signal lever on my 2004 Ford Excursion? please help me need feedback, thanks.

@BIGTOAST187.

6 жыл бұрын

Brute 1985 you never mentioned if the steering wheel had to come off

Go to the youtube video where the guy does this without pulling the steering wheel. It was kind of hard to get a couple panels in and out but I did it today with some twisting and pulling pushing and cussing. It took anout 25 minutes.

Very nice. Quick, calm and no bs banter. Thank you

The instruction is very clear and I was able to replace the switch without any issues. The part perfectly works on my 2004 Ford F-150. Highly recommended to follow exactly this video. Thank you, 1A Auto!

Directions were perfect! My 12yr old daughter did all the work, I just observed. There was a slight difference between cables on 2007 and this model. Video was very thorough, Thanks!

@1AAuto

9 жыл бұрын

Paul Guenther We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393

I have a Ford Expedition and I was able to remove it without removing the steering wheel. When removing the casing from top and bottom it extends a bit under the wheel, just tug it out.

@1AAuto

5 жыл бұрын

Thanks for watching our video! +Edgar Rodriguez

Sorry 1Aauto but I just installed a switch on my 08 f150 and the steering wheel removal is not necessary. Yes I had to manipulate the covers and bit to disassemble and again to install them but not anything impossible. Didn't break anything in the process. So just an FYI on this matter.

@1AAuto

3 жыл бұрын

+Jason Urbina Thanks for the feedback!

@iamkazie9401

Жыл бұрын

How much hassle was it to replace the lever without removing the entire steering wheel? Thanks in advance!!

This sure made me feel MUCH MORE confident to replace my broken turn signal! Actually looking forward to doing it now! Thanks!

This saved me $350 to $400 in labor quoted by my local Ford dealer. Took me about 45 min on my 08 F150 XLT SCREW . Thank you!

@1AAuto

9 жыл бұрын

***** Thanks for watching 1aauto.com 866-403-3393

Thanks guys! I bought the part from your website for my 2008 Lariat CrewCab. The connections on the switch was a bit different then this video, but the plugs were still easy and obvious. Everything else went exactly like the video. I would have never tackled this project without your video. Will definitely go to you guys 1st from now on. P.S. To other folks out there attempting this - I didn't have a 2 jaw puller, so I rented one (for free) from my local O'Reillys. They charge a deposit upfront and then give it all back when you return it.

@tommychii

11 ай бұрын

zac gff !

Thanks guy. Just replaced my signal on my 07 f-150. Excellent step by step instructions. Keep up the good work.

@1AAuto

5 жыл бұрын

Thank you for the great feedback! +Michael Anderson

@ZipSnipe

5 жыл бұрын

how much different was it compared to the video?

This was an awesome video that saved me hundreds$$$ Woohoo! Just a quick suggestion though to put some tape around the driver and the 8mm screw when putting the airbag back into place. The screws fell inside the wheel and behind the airbag unit for me, so putting a little piece of electrical tape helped.

Didn’t even have to take off the steering wheel but I got it done thanks to 1a auto

I didn't have to do any of the steering wheel removal this was above and beyond

i wanted to say thank you very much for this video. i watched it a few times in preperation. my high beam pull to turn on stopped working. i ordered the part from your website, shipped fast. i watched your videos 4-5 times and then went to yee old harbour of fright to get the tools i was missing and this job actually went really really really incredibly smoothly in comparision to other things i have done. i am NOT a mechanic. when i got the old part off i found the lever was broken and it came all the way out. i did not have a spring however, im not sure if that will make a huge impact ? i re assembled and everything appears to be working flawlessly thank you again

Thanks for the video! SO HELPFUL! Just took apart my 2005 F150 as the headlights were stuck on. I did not need a puller for the steering wheel. Just a few pulls and wiggles from top bottom to side to side and it popped right off. Biggest pain was the clips. take your time and watch the video closely The grey and red tabs are just security pieces that come out and clip in after the plug is in position I discovered. Used a magnetic bit holder and a driver for the air bag screws so they didn't fall down inside and stuck a piece of paper towel between the bit and the screw head to make sure it didn't fall out inside. Also mine was build 11/04 and that is the cut off for the different style switch. I wish I had seen your price before I bought the wrong one on Amazon. Followed another video to fix mine but the tab is so worn down that switches the brights on and off that for now I put it in off position and we just wont touch the bright lever. Just closer up showing the clips would help. I will check with you before I buy a part in the future.

@1AAuto

5 жыл бұрын

Thank you so much for the feedback! +Michigander

Used this very detailed video to change my combination switch on my 2005 Expedition. Few differences with screws but this video was great 👍 for walking someone step by step for someone who has never done the job!! 💯🔥 Great video 1A Auto👌👍😎

@1AAuto

5 жыл бұрын

+AJ Advay Thank you very much!

@alow2323

5 жыл бұрын

1A Auto Parts 👌👍

Good video... Gives you an idea outline in what needs to be done. Few things different on a 2006 King Ranch Expedition.. The 2 piece plastic shell is held by the 2 screws for the lower piece and 1 screw for the upper.. Both Phillips head screws... So make sure yours doesn't have the screws up top and yank off it or you will damage the plastic.. Other than that... Worked like a charm... No jaw puller needed... Thanks for the help 1A

@1AAuto

6 жыл бұрын

+Vatozulu Thanks for checking us out. 1aauto.com

Glad you said something about the spring.

@alow2323

5 жыл бұрын

saneauto what if I leave the spring out???

Thank You! Didn't buy your switch but video was a breeze, there's another video without pulling the steering wheel but I opted to so I could clean all the plastics

Thanks for the video!!!! I recently ordered my switch and did the install today. Mine is an '08 so some of the wiring was a little different from the video but the meat of it was definitely there and I received the right part. Video made my life a lot easier and let me hang on to little bit of my money. I will definitely be using you guys again.

Just completed without removal of the wheel. The plastics are flexible enough to pop out with a little effort

@1AAuto

5 жыл бұрын

Thank you for the tips and for watching! +ReedSta4

excellent video, just switched out the turn signal today Thanks

@1AAuto

7 жыл бұрын

+Marco Bravo Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZread&CTA+Comment&N5IgaBLzmR4

Does this really require removing the steering wheel? Your video on the 05 Mountaineer is very similar yet the airbag and wheel stay on.

@astro-hl3ym

2 жыл бұрын

You can do it without removing the steering wheel but it’s a bit more difficult and you’ll almost break things I did it with the steering wheel on but if I had that puller I would’ve took it off just makes things easier

I hope the red clip on the airbag isn't essential....... Great video, I saved money and time. Thanks for posting this.

@1AAuto

3 жыл бұрын

+Stan Shepherd Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

You really don't need to remove the steering wheel and air bag. It's saves a lot of time

Dammit! Pulled everything off until I needed the T50 torx bit and 2 jaw puller.. LOL Thanks 4 posting this video

Just found this, thank you. I suppose I can also replace the right side cruise switch module while I'm in there? My "Coast" button doesn't work. Well, it works once a year!

Thank you! Perfect video!

WOW...perfect video!! I can't believe I accomplished this myself with the guidance of your video!! You saved me hundreds! By the way, I bought my part online from 1A Auto....great price and fast shipping. THANK YOU GUYS!

@1AAuto

8 жыл бұрын

+Bob Durrant Glad we could help. Thanks for watching 1aauto.com 866-403-3393

Thank you 1A Auto. Gonna tackle this project myself now. Whats the likely hood of me needing to replace this spring? On my turn signal when it clicks for the right side, the bulbs wont flash. When i turn the hazards on it wont flash unlesd the truck is off or i get halfway to turning the right signal on. Wanting ti tackle this this weekend

Thank you for all the videos you guys,it helps I’m no mechanic but whit this is very easy to fallow

@1AAuto

4 жыл бұрын

+Marchelosky Medinama Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

thanks for the video, it was a life saver, saved me a boat load of cash. we don't have a 1aauto parts in my area or else you would be my first stop.

@1AAuto

9 жыл бұрын

Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

thanks a1. your video was on the money. it was easier than i thought thanks to you guys taking the time to educate us.T.W.

@1AAuto

4 жыл бұрын

+Tom White Thank you! We love empowering our viewers and showing how to perform DIY auto repairs!

Good video. One thing- I would test to make sure it works correctly before reassembling completely.

@bqcaldwell99

3 жыл бұрын

Absolutely. I did this exact same repair on my ‘07, and I actually overtightened the 8mm screws by the horn/airbag. My neighbors were none too pleased! 😳 All good now though!

Good video, only thing I would have done differently is clean the battery terminals and connectors before reconnecting the battery

I didn't notice a spring. What would happen you don't replace the spring? I tried looking around and didn't find tha spring.

Thank you so much! Was able to accomplish this with your detailed instructions! Really appreciate it!

@1AAuto

8 жыл бұрын

+Cameron Williams No problem. Glad to hear it helped you out. 1aauto.com 866-403-3393

Could the turn signal switch be replaced on F150 with out removing steering wheel?

As always gentlemen, great video.

@1AAuto

7 жыл бұрын

Thanks for watching

Man, one heck of an excellent video presentation. Thank you 1A Auto.

@1AAuto

5 жыл бұрын

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Romin Hawk

Thanks for everything. These videos are so helpful. Keep them coming.

@1AAuto

5 жыл бұрын

Thanks for checking us out. 1aauto.com +Vance Deloatch

This video was a huge help!!! Thank you. I just replaced mine in under an hour!

@1AAuto

9 жыл бұрын

+CaptainBootleg1 Congratulations on the successful repair. We're glad the video helped you out. 1aauto.com 866-403-3393

Thanks for the video! I did snap one of the retaining clips but it all worked out. I opted (stupidly) to buy the motorcraft part from my dealership. If it’s any consolation, I got screwed for almost double of what your company would have charged me. Lesson learned. I will buy from you next time. Thanks again!

Doing this job on a 2005 Expedition limited. Did you just use the steering wheel bolt to snug the steering wheel back on once you lined it up with the shaft?

Thanks for the awesome video with simple instructions. I just ordered off your website and will continue to support your biz. Thanks for supporting customers with this simple how to video. Great help!

@1AAuto

9 жыл бұрын

+Funnel Scientist No problem. Glad to hear it helped you out. 1aauto.com 866-403-3393

what shop wouldn't clean the battery terminals after doing a job like that?

Very good video. Thanks!

@1AAuto

9 жыл бұрын

Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

@Jsuarez6

9 жыл бұрын

1A Auto Parts Just finished installing the new turn signal switch! It was easier than I thought thanks to your well made video. In my 2006 truck one of the connectors on the switch is disconnected down below the steering column; the other two are placed just like in your video. Once again, thanks!

Thank you very much for making & posting this video. Only drawback is I had never used a 2-jaw puller and didn't know what one was. Took a trip to the hardware store & then to the auto parts store to get the right one & then figure out how to use it. The first two wiring harness clips were a little tricky, and my turn signal switch wiring harness configuration was a little different but matched my 2006 F150. Couldn't have done it without you though.Thanks again!

@rickynegrete4066

6 жыл бұрын

What size 2 job puller

From Bill Garghill, do you have to remove the steering wheel on a 2007 FX2 Sport tor replace the switch?

I did mine in ten minutes, just undo 5 screws and wiggle the plastic panels out.

Gracias por el video fue nuestra guía para reemplazar la palanca de direccionales

You don’t have to pull the steering wheel to replace the switch it’s a little tricky to get the plastic from around the steering wheel but I’ve done many never pulled the battery cable the fuse or the steering wheel it’s about a 15 min job

Someone help me understand, when I pulled mine out, the spring fell out and it is like an inch and a half long, the one he put in seemed like is was only 3/4 long....

What is the little spring for

Would a bad switch cause blow fuses

is removing te steering wheel necessary or was it just done to work with open space?

Are we really going to ignore the fact thst this man took apegar the whole steering wheel LMFAO

Excelente... justo lo que necesitaba... Muchas Gracias por compartir. ( Thanks for sharing. Just what I need )

Great Video, The Part was great too! Well done! 2008 F150

@1AAuto

7 жыл бұрын

+pat moon Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY

Ok I need some help...my right turn signal on the dash doesn't light up but I can hear the noise that it's blinking fast. I changed the signal bulb and put a new fuse and it still doesn't work. However, when I put the hazard lights on it works fine (light on dash and the signal blinking outside the car). Could it be the turn signal switch?

At the 5:12 time in the video, you take the old spring from the turn signal and place it into the new turn signal. Do you sell this spring separately, mine has been stretched out. Is it necessary, what is it for. I plan on ordering the turn signal but this is my only delay. Thanks.

@1AAuto

9 жыл бұрын

We do not carry this spring. You might want to try the dealer or possibly your local salvage yard. Hope this helps you out. 1aauto.com 866-403-3393

Thanks , this video helped me out 👍

Have replaced the switch twice now. First one had the issue with the lever not returning back from rt turn, and delayed wiper feature started activating eventhough it is in the off position. Customer service sent a replacement for that one. Awesome! But, now the replacement for the replacement is malfunctioning with the delayed wiper issue! Ugh!! Not sure what the issue is. Its as simple as unplug old switch then plug in the new. Is the only possible thing to fix the issue is to replace with Ford oem? Pricey! Anyone else have this issue w the wipers? If so, has anybody found a remedy? Thanks in advance.

Good video, thanks for making it so easy.

@1AAuto

7 жыл бұрын

+Dale Nolden You're welcome, glad we could help! 1aauto.com

Mine did not have that little spring in the bottom to transfer?

Why pull a fuse if battery is disconnected?

Can I replace my switch for a ranger with the f150 switch?

@1AAuto

5 жыл бұрын

+dungmaker The F150 switch will not fit on the Ranger. Thanks for checking us out!

I have a 2007 Expedition. Neither the wipers or the wiper fluid pump operate. Fuse is good. I'm thinking its the switch in the turn signal. What part do I need to order and will the Mountanier video apply?

@1AAuto

7 жыл бұрын

+Sherrie McNutt Thanks for watching, but unfortunately we do not have a turn signal switch that will fit on your 2007 Expedition! The Mountaineer will be a different process as well. 1aauto.com

My wipers get stuck on once in awhile or completely short out while using them. Also now my highbeam switch does not work either and the actual arm is loose, do you think replacing this whole piece would fix these issues?

@cesar9496

4 жыл бұрын

Yes it will fix everything.

I replaced mine on my truck and initially i made sure everything worked but when i put the plastic pieces all together i went to start the truck and now it just clicks it doesnt turn over. The dash starts acting all weird and i hear clicks coming from the fuse box, can you please help me im not understanding how it even happened it was all fine

@1AAuto

10 ай бұрын

+Blendline Motorwerkz We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

Questions!!! What will happen if the spring isn’t swapped from the old to the new???

@1AAuto

5 жыл бұрын

+AJ Advay The spring should be replaced to avoid premature failure.

Thnks you save me $ did this on my own with your help though🙏🏻

@1AAuto

7 жыл бұрын

+carlos juan Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZread&CTA+Comment&N5IgaBLzmR4

Have a 2002 Navigator. While driving the radio turns off and the wipers go then radio back on. How do I change the wiring harness? I think wires are melted together.

@1AAuto

8 жыл бұрын

+Diane Adams Thank you for watching. Unfortunately we do not have a video for your application. We will keep this in mind for future repairs. That said, I would recommend checking your ground wire locations in the vehicle. Do a search for "ground locations" for your year, make, model. Weird stuff like this can definitely happen from a corroded, or loose ground strap somewhere in the vehicle. Good luck! www.1AAuto.com 866-403-3393

I have a 2008 E150. Would this solve the issue of my blinker not canceling?

@1AAuto

7 жыл бұрын

It may be due to a worn turn signal switch.

I have an 06 Expedition. The switch on my vehicle "works" but it has no retention or "springiness" When I turn on my brights. it doesn't click and the arm can swing back and forth freely. It swings so much that often, the brights will be engaged when I use the turn signals. Should I replace the switch or is there a spring or clip that I can get to fix the issue?

@1AAuto

6 жыл бұрын

+Ryan Kincaid You may need to replace the switch if it is bad. Thanks for watching. 1aauto.com

One question... I have a 2004 f150, and my turning signals turn on but then stop working... It may work for one click then I'll stop... I turn the hazerds and they work.... If I change the switch will this save my problem... Please respond....

@josearellano3268

9 жыл бұрын

Found the problem it was the flasher....

gracias muy bien el video me ayudo en mucho gracias

Is it possible to remove only the plastic surrounding the switch, and not have to remove the steering wheel?

@1AAuto

7 жыл бұрын

+TheRealDJOsk Thank you for viewing! There are mounting bolts behind the steering wheel on these vehicles which would prevent replacement if the steering wheel is not removed. 1aauto.com

Totally awesome video!!!!

@1AAuto

6 жыл бұрын

+Aaron T. Nelson Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

You can do this without taking the steering wheel off

Is taking the steering wheel off the only way¿

What size two jaw puller

Extremly helpful

@1AAuto

6 жыл бұрын

+Jesus Cordova Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZread&CTA+Comment&N5IgaBLzmR4

08 f150 xl. With the crank windows... exact same process?

@1AAuto

5 жыл бұрын

+Cam O'Connor It may be a different procedure on your application, but will likely be very similar. Thank you for asking. 1aauto.com

@Blendline

10 ай бұрын

@@1AAuto can you check my comment please i just posted it having some trouble

Will this work for a 2004 Ford expedition?

@1AAuto

7 жыл бұрын

+rbm11761 Thanks for watching! The procedure is different on an Expedition. Here is a link to our site with the part, and there is a video for your application! www.1aauto.com/turn-signal-and-wiper-switch-lever/i/1azcc00176?f=375604&y=2004

I have a 2007 Ford Expedition my hazard lights wont shut off already replaced the combination switch any suggestions

@1AAuto

5 жыл бұрын

+Eli Garza It may be an issue with the lever in the combination switch not turning this off. We recommend getting this diagnosed to ensure nothing else may be the issue.

@eligarza2435

5 жыл бұрын

I changed out the combination switch a few minutes ago and it still does the same symptom

@1AAuto

5 жыл бұрын

If you are still experiencing the same issue, we suggest getting it professionally diagnosed. +Eli Garza

nice I'm saving good money now thank you....;*)

@1AAuto

8 жыл бұрын

That's our goal. We're glad we could help you out. 1aauto.com 866-403-3393

Hello what type of 2 jaw puller do i need to use what size of thread is it and where can i buy it?

@1AAuto

6 жыл бұрын

+lenyn cristobal You should be able to purchase one from your local auto parts store.

@lenyncristobal

6 жыл бұрын

1A Auto Parts what size do i need for this truck??

What if I need a new spring, mine has been hanging there for a while and I think the spring has been stretched out.

@1AAuto

9 жыл бұрын

Thank you for watching. Unfortunately we do not have a video for your application. We will keep this repair in mind for future videos. 1aauto.com 888-844-3393

@cruzgallegos6622

9 жыл бұрын

I have the same spring problem any thoughts on this?

What do I do if I don’t have the jaw puller

@jeremytarter

Жыл бұрын

Don’t have to take your steering wheel off. This video was VERY helpful, I rented jaw puller from Advance Auto, turns out though that I didn’t have any bolt holes to screw it into when I got to that point. Went back to the tube & found another video… surprised to find out, that I didn’t have to take the steering wheel off in the first place. May make it a little bit simpler to remove & then install the one plastic piece next to it, but it was easy enough with the steering wheel still there.

What if I lost the spring . . .

There is no reason for you to remove the steering wheel that is unnecessary work. All this could've been done with the steering wheel installed

What size wheel puller?

@1AAuto

7 жыл бұрын

+Butch Good Thank you for watching. We used a two jaw puller, and they are available at any local auto part store. 1aauto.com