Thank you very much, very precise instructions 👍👍👍

very good videio ever4ything went fine until i went to attach screws that hold the door panel on none of the hole seem to be threaded does it have threaded inserts that may have pushed out i will be tearing back into it to find problem thanks for discriptive details

How did U force regulator to move glass with removed panel? I cam see extra wire and switch.

very helpful step by step video. I have a slightly different problem on my 2006 750LI. My front passenger window is stuck at fully closed position and I am unable to open using the button on my driver door and the button on that door. There is absolutely no sound when I press the button. I have checked the fuse and they are fine. I am suspecting a motor failure. Now my question is my window is stuck at the fully closed position. Will I be able to remove the glass while it is stuck at fully closed position to reach to the regulator? Thanks for your help.

@gtarules1

6 ай бұрын

did you figure it out??

@lynxstarautomotive208

5 ай бұрын

You need to think outside the box on this one. Remove or disassemble the motor from the regulator. At that point, the regulator is freed, and you can manually position the window where you need it. Although, the motors on these rarely fail. What happens is the regulator fails and binds up the motor. Same concept tho, the motor needs to be removed from the regulator.

Dude where are you from? I have never heard an accent like yours. "There's a torx screw heya heya and heya."

@AndreSmitCP

10 ай бұрын

South Africa 😉👌

@lynxstarautomotive208

5 ай бұрын

@@AndreSmitCPI’ve also heard some Aussies speak in a similar accent. Like the country side Aussies

@AndreSmitCP

5 ай бұрын

⁠@@lynxstarautomotive208Yes, but this oak is definitely here from South Africa, it's in his linkedin profile as well

@lynxstarautomotive208

5 ай бұрын

@@AndreSmitCPwasn’t disputing that. Just funny how broad the Aussie accent is.