thank you from brazil!!!! you saved my ninebot

@JaysDMC

4 жыл бұрын

Nice! Ride safe!!!!

Hella long process, BUT thank you. I just completed the inner tube replacement, and patched 3 holes in the used tube--Appreciate the tutorial vid.

You're the man bro this is it right here

@JaysDMC

3 жыл бұрын

glad you found it helpful!

cheers man, nail in the tube. You saved my nerves....

@JaysDMC

3 жыл бұрын

On day 2 of owning mine I managed to get a nail in the tire! LOL

Thanks for the video, without it I don't think I would have figured it out!

Very useful - thanks! Haven't tried on the Ninebot yet, but on bikes I like to put a little air in the tube before fitting the tyre back on the rim, to reduce the likelihood of the tube getting twisted or pinched by the tyre.

Great job. I've had a flat tire since September and I kept putting off changing it till now. Thanks for sharing. Very Helpful.

Thanks for the video my friend I have a ninebot one e plus and always think that if one day I get a puncture wheel how I gonna fix it. Thanks again👍🏽👍🏽👍🏽

This video was useful (again) to me. Thank you.

Thanks, this vid was really helpful as the ninebot one I have isn’t actually mine and I kind of want to fix the tube before the actual owner knows

@JaysDMC

4 жыл бұрын

During the first 2 weeks of owning mine I somehow managed to break the carrying handle and getting a hole in the innertube. Off to a great start! LOL

thanks for the video, will be planning on changing the tire to the Mad Max one with the winter weather coming, course gotta receive the shipment of my ninebot first and learn to ride lol

@Nepal20248

7 жыл бұрын

Hi I got this nine boot 1 3 month ago. I was not really perfect to ride but I was trying. While I was riding I got onto shit and I clean with the water. Now it stop working. I opened and check inside the battery looks good. I don't know why it's not working. Can anyone help me what is the issue now plz?

Thanx that was helpful

@JaysDMC

3 жыл бұрын

glad to hear that!

Thanks a lot for this video

Thanks for the video !! It was really helpful!!

@JaysDMC

4 жыл бұрын

Great!

Most helpful. Thank you so much!

Thanks for your demo! You're the man!!

Thanks great video

I have a different solowheel, and putting back the tyre was much much harder. I think you can put the last bit of the tyre on much more easily by pushing in the tyre starting at the opposit and finishing at the point where you want to tuck in the tyre.Repeat the other way. Tyre levers help too. But good video:)

Sure is a hulluva lot easier to get the tube out of these things than it is the scooters! :)

@JaysDMC

4 жыл бұрын

I just did an inner tube for an Eco Reco M5 scooter. What a pain in the rear!!!!

I don't know what happened, I didn't even take mine apart or anything...I just put some air this morning, then suddenly the wheel wouldn't go all the way around. Something was hitting somewhere...I deduced that it could only be the schraeder valve hitting something on the inside, but I can't figure out why or how to make it be back to normal. I don't want to have to break the whole thing down like you just did...thought I'd just ask around first if anyone ever had that happen after putting air, and is there an easy fix?? I just got this from ebay and haven't even had a chance to ride it yet!!

Thank you for demo!

NAH! Ask your LBS about inserting that tube - you need just enough air in it to smooth it out so there are no wrinkles. It's much easier to insert then - it isn't more than 2-3 pounds pressure. That way you are also much less likely to end up with a wear-line and pinch-flat caused by a wrinkle. Also, I would use the old tube like a tire liner. Just cut off the valve stem and slit the tube around the inside and wrap it around your new tube before you install it. Truth - the thicker the tube the better the puncture resistance. You can do more than one even, or use any 16-inch bicycle tube as a sacrifice - even the super-HD ones. Just don't try to use a solid inner tube - they defeat the entire point of pneumatic tires. They will increase rolling resistance a lot.

Jay, just a thought . a slip of Vaseline around the wheel and tyre rim will help the tyre slip on to the wheel rim more easily.

Where is a good place to buy the inner tube? NinebotUS is sold out.

@JaysDMC

4 жыл бұрын

I got mine on Amazon. I think I had to find the dimensions and something with the bent angle valve.

thank you!

I've been trying to find an inner tube online with the stem not protruding out. Where did you or can you purchase it from?

Same for the ninebot one S2? Thanks!

@JaysDMC

3 жыл бұрын

Sorry, I've never done an S2. Hopefully someone else here can advise. Good luck

How do you do this for an s1? I cant find a tutorial anywhere and now I have a mostly open unicycle on my floor. Help!

@rymandmusic

5 жыл бұрын

TriVnac - Anselwithmac did you figure it out!!?? I have an s1 as well and I am worried about doing this but I have to.

hi ok that was a pain in the ass got the tire on road the wheel twice now tire is flat. filled it up to 55 psi like you said. also i have had this ninebot for less that a year and have had three busted inner tubes. my weight is 200lbs any suggestions

@sergmo1603

7 жыл бұрын

they sell tube liners at most bike shops i think they are cut to size and you install it in the tire then the tube.and they have different thickness.it's been a while like 20 year since I've used one.I think they still have them? i use to get thorns on my bike like every other week till i started using them.it stopped that.hope it helps.hope they still sell them.

@davidnewell7242

7 жыл бұрын

thanks but even though the tire says 40 to 70 psi the correct psi is like 35 to 40 i was filling it up to what the inner tube and tire was saying but its wrong. so i was over filling the inner tube that plus im 200lbs.

@tiramisu8359

6 жыл бұрын

i found its hard to control the euc if the tire pressure too high due to lose of traction to road. i find 35-40 is the best tire pressure for euc.

@vilaometralha6146

5 жыл бұрын

Sorry body but you are too heavy for the machine, loss 60pd and you will be ok

you really need to buy your self new proper tools. and a small electric drill with fittings for screwdriver ends and allen type ends makes things much easer and faster.just get a drill where you can set the torque too, as not to strip the screw or what it attaches too. like plastic or aluminum.but other than that thanks for the video.

@vilaometralha6146

5 жыл бұрын

No Power Tools on stuff like this my friend.

Ugh- not looking forward to this

@JaysDMC

3 жыл бұрын

it's doable. Not fun, but totally doable for the home "EUC mechanic". Good luck.

Thanks... and blow your nose next time... its annoying