Great video you explained everything in perfection, keep up the good work

I don't even have an ATV but I watched the whole video. I think it's because you make them interesting.

I love your instructional techniques ... geared for all levels.

Awesome! This video just taught me some great stuff! I have to replace the guts in my front wheels for my 4 wheel drive and this helped show what I'll be dealing with! Thanks as always and good health to you guys!

Dony. Many thanks. I am just getting ready to do my right rear bearing and replace a broken knuckle on an older Arctic Cat 400 auto 4x4. Man, this vid was just what I needed on thinking through the disassembly. I like your methodical process. Very profesional. Thanks and I am looking forward to seeing any tips in the re-assembly.

My first time workin on my quads and I was happy af I was able to get to my bearings lol great video. Now to replace em!!

man you are the best at what you do !keep them coming

Thank you for this video , I was able to fix my four wheeler in one hour.

GREAT JOB. Very understandable. Clear. To the point. Awesome. I subscribed!

Great Video Dony, Its nice to see something other than carb videos.

Thanks donny :-) Another great tutorial :-) Parts washers are great, i used to use one and an auto repair shop, and an airline terminating in the typical lever gun just wizzed off the majority of the fluid :-)

Extremely good video parts one and two :)

Helpful as always. Keep 'em coming.

Awesome video! Can't wait for part 2!

Love it, more videos like this please.

I'm looking for a video on the rear axle. I have a 400 Eiger also 2007

Got my bearings an seals.goona change mine out. I just watched the video just to remember what all i had to take off,Now moving on to your Part 2 Thanks

Thanks for the great video I have to change mine on my cat 400

What's the use of the perforated plate between the caliper and the disc

Thanks for the video I needed help doing this know I know how! Thanks

This is some good shit, ill go and do this myself to my Falmek Force 400cc, Ty

Anyways, can you say if Yamaha raptor 450cc front lower ballbearings go to my Falmek Force 400cc? (Yamaha Raptor 350cc copy with 400cc engine)

Hi Dony , are you able to do a piston ring change video ? and the steps to do it on a suzuki Eigher 400? cheers, Charlie.

Nice detail. I was only wondering about the Bearing removal but like how you made it idiot proof for the not so handy. Thanks

hey donyboy i got a new go kart and the back tires have that same play but i only had it for a couple of months i dont know going on cuz its new.

Hey my 2 week old raptor gas light came on and went to put gas in and it was smokey inside? Any suggestions?

Dony had my mower out the other day to get it going again and it was making a nocking noise when I switched it off do you know what it will be

Nice video!

oui j'ai deja entendu parler de cela

That's a great video, Dony. It's especially fun to watch this done in the smaller size of an ATV. I'm a little puzzled by the diagnosis. In a car, when the wheel wobbles at 12:00 and 6:00 it's usually a loose ball joint, not just a wheel bearing.... With two wheel bearings separated by a spacer, I presume ATV bearing take on more lateral stability?

thanks Braden

Very informative.

rear axle bearings ended up taking whole axle tube off the wheeler, long bar knocked out all but the races, had to torch them out cut a notch in top and bottom then hammered and chisel it out

You are steel an artist on your stage. Ceao.

Great instructions Doc. T.U.

What if you don't have the bearing spacer?

Why would mine constantly not idle right always turning the idle knob up the after a bit it’s too fast ? Suzuki eiger 04 .

awesome!

It's impossible to get the castle nut off without air tools I've tried and also the nut is 28mm not 30...

thank you

I have a question. I recently bought a used 2009 rancher and when i checked the bearings there is a small amount of play. Not sure if its worth changing yet. How much play should there be for concern? Thx and awesome videos!

@hursteric

9 жыл бұрын

I never let the play be anymore then a 1/4in or so. I also wouldn't use all balls like he did I would go with oem. I have worn all balls and pivot works bearings out in. 2 short rides.

@davidross932

5 жыл бұрын

@@hursteric yep I agree with that, sometimes it's just wort the extra 12.00 or so!

I just cannot get the bolt off the hub its stuck

you're welcome, part 2 tommorrow

thanks

Awesome! thanks

Nice video

i do all the time in my shop, lol, i find it hard to do on camera when filming myself

part 2 tommorow

part 2 tommorrow morning

Great job Dony!,........ Another day@ the office for the " Top-Gun"..................😎👍👏🍻✌️🍁

@donyboy73

9 жыл бұрын

it helps when I get top gun comments!

@donyboy73

9 жыл бұрын

are u Canadian?

@jerrythecoo3295

9 жыл бұрын

Just putting the truth out there dony for all to see....... 😎👍 Yes!,...... From Fort.St.John,BC.🍁 Looking forward to meeting you.

@donyboy73

9 жыл бұрын

I'm in Ontario

@jerrythecoo3295

9 жыл бұрын

Going to visit family in Windsor next summer... You close? Yeah I figured Ontario,.. You've mentioned it in some of your videos..........

see part 2 tommorrow

part 2 tommorrow

wish I had one

yu're welcome, it may differ slightly but it will be the same principle

Does your four wheel drive ATV have a lot of slack in the front wheels like this. Hell know mine has three times that haha

this vid was filmed prior to the 15 min allowance

What if your hub it stuck on? Hiw should i get it off

@thomasdunn5945

10 жыл бұрын

Penetrating oil and 24 hours

make sure the blade is on tight

i've noticed they wear out quicker than a car.

We always have those type of wheel bearings pressed in by an alignment shop.

Where s part 2

They aren't really alot different to cars are they? Supprising how similar they are

i've got the parts washer now

Dony, You should go to the junk yard and get a broken atv and make videos for us.

Where is part 2? ;)

I don't know about dony, but some of ericthecarguys longest videos are around 40 mins. (He has 100,000 Subs +)

Cant wain till u get that parts washer

oui

lol, i noticed a lot of people like to do that

what part is that called that you are taking out the seals on? I broke the piece that the tie rod connects to the part. and looking for a replacement part for it.

@scottr8360

7 жыл бұрын

Look at the diagram on your model: www.d2moto.com/pages/atv-parts or some other online part store that has your model.

THIS is exalty y I want use a Suzuki nothing is inclosed on that thing

they are too expensive

yes I though it was interesting

No play but I have squeaking like crazy. Idk maybe dirt caught. I used wd40 n now I squeak. Well that's a first

How come you still make videos into 2 parts? KZread should have giving you the privilege of uploading videos much longer than 15 minutes.

such a canadian accent eh

yy

lol