I have been buying the 12v Milwaukee tools and they work great! In the 80s the corded Milwaukee were the best tools to buy now they are back on top again! Thanks for reintroducing me to the Milwaukee line. They make the jobs a lot easier to accomplish. Your vids are excellent as well. Always like to watch a great tech at work!

@HowtoAutomotive

6 жыл бұрын

bill beckett thank you! I can’t say enough good things about Milwaukee Tools. They are so innovative and priced right where the average guy can afford them.

@me_liam_the_gamer

3 жыл бұрын

I work for Tennessee Conveyor Maintenance & Service. We mostly use Milwaukee tools. They are some of the absolute best. The torque on the impacts is ridiculously powerful! We have the same one he used in this video and i guarantee that little sucker could break and nut or bolt in this world loose with ease! Plus you just cant beat the price of Milwaukee tools!

This is an excellent video. Thank you very much. Watching this video just reinforced the fact that the job will always be MUCH easier with the proper tools. I didn't see you scrape your hands one time😂😂

@franciscasey5510

2 жыл бұрын

InstaBlaster.

Best video on youtube for egr valve. Great video. Thanks

@HowtoAutomotive

4 жыл бұрын

OfficialCiscoKid - Topic thank you!

@williammoyler4372

3 жыл бұрын

@@HowtoAutomotivewant to do this

Excellent video. I found this job quite challenging and I am pretty good with mechanical work. The plenum would not come off for me. Ended up having to completely remove the dipstick tube to get it off. Also I was working on this in my driveway with it being jacked up and the front passenger side wheel was removed. I ended up getting it done but was a fight for me. Hot out too! I have a 2010 Dodge Charger SXT. Mine has the transmission that is non serviceable. It is sealed so when dipstick is remove no fluid comes out. Thanks for the video it helped. Spot on!

@intrepidman2

2 жыл бұрын

You said exactly what I was about to type.

@elmayimbe_the_amateur_mechanic

6 ай бұрын

​@@intrepidman2, brother help me out. I have to do this job for a 2010, 3.5 on Wednesday. I've pulled the plenum off on a 2018, 3.6 to do plugs so I have some kind of experience despite being different motors. Book time says 2.5hrs I have all the proper tools to get this done. I should be able to do it in the alloted 2.5hrs? What do I charge for labor here?

Good tutorial. Wish I had the work area to take my time and do it myself.

@Antonemoe

Жыл бұрын

Local dealer wanted $250 for labor $247 for the part which was $37 on rock auto moi labor was free

Thanks for the video the help me To repair EGR valvue the extra tip by the extension was great.😄

@derekirvin6338

2 жыл бұрын

Did that pipe call for 2 blue seals

@derekirvin6338

2 жыл бұрын

Did that EGR valve pipe call for two of the blue seal rings

I just got a 2005 charger and the EGR VALVE. Needs to be replaced and looks easy to replace... just gotta have patience.. And follow the teacher.👍👍. My friend said it's gonna cost $600. To replace and will need special tools to do it...... I've got everything needed to do it myself.... thanks again

@HowtoAutomotive

3 жыл бұрын

If you got the tools are going to save a ton of time and money.Good luck with the repair and thank you for watching!

@thechampion9525

3 жыл бұрын

@@HowtoAutomotive hey i like ypur videos ..i just replace the spark plugs and had a trouble to put the EGR tube inside to the intake did you know a easy way to do it ?? I could put some kind of lubrication ??

Very helpful video, thanks for making it!

My EGR just went out perfect video i was bout to pay 150 to this dude im doing it my self now thanks to you

@HowtoAutomotive

2 жыл бұрын

Awesome hopefully you can do something fun with the money you save.

@johnringoo756

2 жыл бұрын

How do you know what goes bad, you get a code?

Great video. One suggestion to everyone. Replace the PCV valve at the same time. It is above the EGR valve. May as well do it while you have the intake manifold off the engine

@ayalejandro

10 ай бұрын

I just stripped 3 bolts on the intake manifold 💀

@craymation5130

4 ай бұрын

I did the same bro, 105 foot pounds when it was suppose to be 105 IN pounds, Good luck bro@@ayalejandro

I have a 2010 DODGE CALIBER SXT and I’ve been trying to find a video on how to change the EGR Valve but this car’s engine you have here is a lot different. The reason I’m looking for it it’s because I want to clean my EGR Valve to see if car will stop jerking at times

Thank you. Very good instructions

@HowtoAutomotive

5 ай бұрын

Thank you!

Excellent video!

@HowtoAutomotive

2 жыл бұрын

Thank you!

Great video , helpful chief .. very!!

@HowtoAutomotive

4 жыл бұрын

Edward Jr glad the video helped. Thank you for watching!

@edwardjr598

4 жыл бұрын

@@HowtoAutomotive should i put some sealant on the egr pipe if its not in all the way

Nice video thank you

Big help thanks

I just removed the wipers, motor that cross bar, with a few lights extensions and a little wiggling I replaced my EGR without removing the intake and other components

@jamesmonteon2787

20 күн бұрын

Yes! I was about to say, definitely don't have to remove the intake mani.

Instead of leaving that long extension on the egr valve to set the location…just mark the pipe before you take it apart

Solid video. In your Opinion are 3.5 a good engine?

@johnringoo756

2 жыл бұрын

Absolutely I have one with 250 on it. No time belt yet but getting it shortly ..still runs like a horse..2.7 is the bad one

Did you forget to put a list of tools needed for this job? I looked through all the links.

thanks very helpfull video

@HowtoAutomotive

3 жыл бұрын

Thank you for watching!

@thechampion9525

3 жыл бұрын

@@HowtoAutomotive hey men nice video i just replace the spark plugs also the EGR gasket but something went wrong cause the idle is very rough also on dash board the lightning bolt come on ..am sure its because the EGR gasket mayne doesnt sealed good What i need to do ??

Does seafoam throttle body cleaner work to clean cloggs out

I changed the egr valve like the video said now my car running ruff. What should I do

Wherever you use that m12 impact driver... The m12 ratchet could be used instead?.. I have both, just wondering which is handier

@HowtoAutomotive

6 жыл бұрын

RAM TRUCKS if I have the room I like to use the driver it’s it’s a faster tool.

The screw assembly pattern is not on the common user manual right?? Where can I get those kind of instructions?

How do you get it to be flush to the intake manifold?

What is a 3h drive deep socket I don’t have one or what size is this ?

Nothing like a 1983 Cutlass Supreme brougham

i think i am going to replace the head gasket on my 2007 dodge magnum 3.5 v6.

If it’s plug with carbon in the line what do u do

Great video.

Thanks for your video, what was the code or how do you know when it's time to replace it... Thanks

Possible to swing and slide the valve out through the bottom without removing the intake?

@HowtoAutomotive

4 жыл бұрын

Francisco Perez you could try but I don’t think there’s enough room to get it out.

Can I replace the blue seal on the egr tube without removing the plenum? Or do I have to losen it to unhook the egr tube?

@nicks6958

3 жыл бұрын

That's what I have been trying to find out.

@daddyphatsax88

2 жыл бұрын

you don't have to take the intake manifold all the way off but you do have to unbolt it... and since you're unbolting it you might as well take it all the way off and change your plugs and pcv valve too.

Just a thought why one would not consider to replace those 3 back spark plugs while you have pulled half the motor apart to replace the EGR valve. Just seems a perfect time to replace those 3 nasty and buried plugs under Manifold unless you want to do this whole exercise twice..

@johnringoo756

2 жыл бұрын

Coils too !! Buy them cheaper online

What are the symptoms of a bad EGR . ? My 3.5 has bad idle still after replacing plugs

@HowtoAutomotive

6 ай бұрын

Usually there is no symptom unless it sticks on. Most common is it doesn’t work setting the check engine light. If you have an idle problem, I would suspect a vacuum leak or the idle control valve itself.

Can you connect a rubber hose from egr tube to intake?

@talalfaroq

4 ай бұрын

يمكنك فعل ذالك

The uhhh pipe in the back for the egr valve i think its called,.. i didnt see you plug that one back in how should i get it to fit in all the way its kinda making a leaking hissing sound any pointers

@carlwatson5332

4 ай бұрын

Same problem got a little hissing noise coming from blue seal

The EGR valve to head gasket can go on either side?

@davidramirezw26

2 ай бұрын

There is a side that i believe is to get in easier but wont come out so easy

Just wondering wat symptoms or issues u having to replace this part... I'm currently experiencing stalling and rough iddle on my 3.5 300c n I'm chasing the issue atm . Could this be?

@x7superpocketbike941

2 ай бұрын

create hesitation issues when you accelerate as well as a rough idle and possible stalling

@x7superpocketbike941

2 ай бұрын

I found 1 tank tune up works really well , about 25$ for a bottle but it cleans the engine really good , make sure to put it in when your car is almost outta gas , I noticed my gas mileage went up too

If my egr valve went bad could that be why my car won't turn on just cranks up?also what are each tool I need to do all this at home? Please help

@HowtoAutomotive

3 жыл бұрын

It’s a very remote possibility is that is the causing your car not to start. Only way it could is if it was stuck in the wide open position. And That’s a very rare condition. As far as Tools go I would have to have the car right in front of me to know.

why did you change the valve?

My God that's a lot up things for me to f****** up where did I put that goddamn magic wand

One problem here. The Chrysler 3.5L used in the Sebrings is different. I have tried numerous times to remove the plenum and upper intake manifold. But there is one bolt in the back that I can't reach. And I still cannot find a single video here on KZread that addresses that problem. I was hoping to find it here. Nope. :(

So what if the gasket that goes between the valve and the engine doesn’t get installed?

@mykellwilliams8153

Жыл бұрын

It will idle really rough and eventually lose power and the car will shut off

Whoa

is this easier from underneath? I've got the car on stands & my cats off for replacement, pretty sure I've been starring at the EGR. good detail(talking) & closeups in the tutorial.

i have a 2008 dodge charger 3.5L....i replaced that blue egr valve gasket properly and there is a vacuum leak.... like its my third time!

@rickkid007

4 жыл бұрын

There's an easier way to replace the egr without removing the manifold

@andresrocha7393

4 жыл бұрын

@@rickkid007 How?? Trough The Bottom Or Top Of Car?? Any Help Would Be Appreciated.. Thanks!!

@rickkid007

4 жыл бұрын

@@andresrocha7393 you have to remove the plastic trim right below the hood and up against the frame. Remove the wipers 1st, remove the trim and you can reach the egr from there

@natedawg9006

4 жыл бұрын

I got the same car and same problem 🤦🏾‍♂️

👏

I had the p0406 problem on my car Dodge charger 2008 v6 with is sensor A so I changed the sensor A then the engine light gone, then after 2 weeks it’s came back again. Notice that the car at speed 60km and 80km kind of losing power! I dont know what the exact word to describe it.

@cameronarmijo4524

3 жыл бұрын

When u replaced sensor u gained the hp back but it happend again? Any oil light trigger?

@D8ahmad

3 жыл бұрын

@@cameronarmijo4524 i changed the EGR now i dont have that problem anymore.

FYI, it won't always seal.

@modestvibes5325

8 ай бұрын

Threw my car into limp mode now have to go back and find out how to get it to seal idk what to do any tips would be greatly appreciated

I just stripped 3 bolts on the intake manifold 💀

@HowtoAutomotive

10 ай бұрын

Sorry you’re struggling. GearWrench Tools makes Sockets called the Bolt Biters that can help remove stripped bolts.

Nvm i see around @7:30

When do you know an EGR valve has gone bad.

@HowtoAutomotive

2 жыл бұрын

If it’s stuck open it will run bad at idle.if it’s not coming on or the port’s are pulled you will get a check engine light. Also you will have high NOx on a emissions test.

I freakin' hate freakin' dodge ,to get to one simple problem you have to take the whole freakin' car apart .

@ramtrucks721

6 жыл бұрын

Venita Rosier You think Ford and Chevy dont????... Ford is the worst! Shut up man.... Dont ever say crap about Dodge RAM or Chrysler. . makes me angry lol

@HowtoAutomotive

6 жыл бұрын

Venita Rosier all the cars are starting to be like that now days.

@spexx671

6 жыл бұрын

Just had my EGR installed now I'm having trouble my trouble is I got a red lightning bolt light on and my traction light won't let me have no power to take off or nothing what could be the issue I got a dodge charger 2007 3.5

@HowtoAutomotive

6 жыл бұрын

XGEN Swiift_YT The throttlebody usually sets that little light. it may have lost its programming or have a problem with it.

@thedad4091

5 жыл бұрын

Michael Helman that happen to me recently just make sure the egr ring is on correctly or not torn that will fix it

Don't buy the Dorman EGR valves,junk.Have seen so many problems with them.Those red locking tabs,I remove and toss.They are nothing but a pain in the butt and not needed

Oh yah, electricars are great! No egr valves. But you can park all ice cars in your garage!😂

24665Solciti

Would the egr cause oil temp to get high whem up to temp ?or oil light on when idle

@HowtoAutomotive

3 жыл бұрын

The dryer would have nothing to do with the oil temp. It actually cools the combustion chamber and reduce heat.

@cameronarmijo4524

3 жыл бұрын

@@HowtoAutomotive yes and my egr valve sensor reading high sluggish idles rough