How to Replace the drive belt on the Ford Escape 2001 - 2017

Автокөліктер мен көлік құралдары

Do you need to Replace the drive belt on your Ford Escape (2001 - 2017) but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Ford Escape (2001 - 2017) manual covers petrol and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-us/ford/escape/...
What's covered:

Пікірлер: 8

  • @sirggsengreen5067
    @sirggsengreen50673 күн бұрын

    Hi, I need some emergency information. What happens if Step1 is skipped? What will happen if the Remote Negative Cable isn’t removed and secured??

  • @edlangmaid372
    @edlangmaid3725 ай бұрын

    Good video and seemingly doable. But it depends on the Escape. WIth my 2017 Titanium (and maybe other models) there was a choice between two different sized drive belts depending on the capacity of the alternator. AND there was another belt just for the A/C that was hiding. It needed a special tool or knowledge how to install as it doesn't have an auto tensioner. Fortunately I had already decided to get a mobile mechanic who charged me $240 for labor and 2 Gates belts. I recommend you use the best belts you can if you are going to the trouble to replace the belts. Just my opinion. I didn't check to see if Haynes covered the replacement of the 2-belt design in another video or in their manuals, at that point I had luckily committed to a mechanic.

  • @michaeljewell6664
    @michaeljewell6664 Жыл бұрын

    All this just to change the belt?

  • @TheSteveaust
    @TheSteveaust Жыл бұрын

    for a frigin belt....thanx Ford..

  • @suzanmann2480

    @suzanmann2480

    Жыл бұрын

    right? my boss teases me, calls my car a ford mistake, instead of escape, lol

  • @ajcreation9889
    @ajcreation98895 ай бұрын

    What about the idler🧐

  • @InfamousEggNug
    @InfamousEggNug7 ай бұрын

    What? No no no. This is a video about changing the belt according to the video title (dated 19 NOV 2023). You do not mess with the tensioner bolt unless there is an issue or a need to. Take the tension off and belt, put new belt on, then put tension on belt. Done.

  • @wwhollowpoint9
    @wwhollowpoint93 ай бұрын

    Not sure why you would need to take the motor mount off. Nor the tensioner. A lot of extra work for no reason.

Келесі