How To Replace The Deck Belt on a 54" Husqvarna Riding Mower
Ғылым және технология
In this video i show step by step on how to replace the deck belt on a
54" Husqvarna/Poulan/Craftsman mower deck, it is very simple, also always rememeber if you do not feel comfortable doing these types of repairs yourself, consult a professional!
Пікірлер: 33
Great Job! I realize it is 2022 and a bit late on seeing this. Just changed mine with your video. Quick and straight to the point, like I like it. No BSing around like most others. Super presentation. Have a great Navy Day!
Best show how yet. Thank you!
Thanks. I had a heck of a time trying to get the belt on right, but you fixed it! :-)
This helped! Thank you
But how do you tighten it please? I have a GTH24V52LS with the commercial grade fabricated 52" deck. Operator's Manual says tighten belt until spring is 5.1 inches long. But, 5.1 from where to where. If I use end-to-end, including attachment loops, 5.1 is too loose. If just the spring coils, it seems way too tight. I'd buy a shop manual, but can't find one. Any help would be appreciated!
Thank You...
Thank you.
YOU ARE A LIFESAVER !!!! THANK YOU SOOOO MUCH !
I went from a lawn tractor to this mowers should have done it years ago. I could never justify the $$$ as the old tractor just kept running, although slowly even with just an acre to cut... Well, I gave the tractor to my friend and stepped up to buy the Dixie Chopper 2348 Zee 2 w/ Kawasaki power.
Replaced belt, now it makes a squealing noise when I engage the electric clutch. What causes that? Thanks
Forgetting something lol. How about how the tensioner and spring connect.
Mine is throwing the new belt off what could be the problem please help and thank you
@SFCStevens
3 жыл бұрын
Did you ever figure out how to fix it? Mine is throwing off the belt now...
The belt has a shape to it. Is it important to face the flat side any particular direction?
@SFCStevens
3 жыл бұрын
Yes
I just got a Husqvarna 54" riding mower 4 months ago, and the belt has came off a few times, and now yesterday it was tore up, so I bought a new belt. Trying to put the new one on. I am following the diagram and know I have it on right, but I haven't seen anywhere it saying about the thick side of the belt going on the inside, or against the pulley's or should the thinner side go against the pulley;s or does it matter. Also took the deck off to put the belt on, and then put the deck back on and tried to hook the belt around the last pulley but just couldn't get enough slack to get it around it. Is there a trick to getting the belt on the final pulley after putting the deck back on? Thanks for your help.
@gregparsons4542
3 жыл бұрын
I need to see how to get the front pulley on too. Can you show that please…
@SFCStevens
3 жыл бұрын
@@gregparsons4542 There's a tension lever you can adjust...
@JohnSmith-yn8pl
2 жыл бұрын
The belt came off my 54 inch cut Husky. Now there is a squealing noise when I engage the clutch. What causes that? Thanks
Mine has the same pattern. It keeps throwing the belt off. I cleaned the deck too and underneath. Everything moves freely. Any ideas with just this information why it could be doing this?
@joeholland428
6 жыл бұрын
Scotty Thompson my same size craftsman is doing the same. Ordered a new belt was thinking maybe the 6-7 year old belt was worn out? Did you solve your issue with it throwing the belt? If so what was your solution?
@yourjoint9099
5 жыл бұрын
@@joeholland428 Make sure the idler arm is in the correct position and is not bent. That was my problem.
@joeholland428
5 жыл бұрын
A 1030 Joint so after i worked up enough courage to crawl around under it i found the drive idler spring was broken. I ordered up all new pulleys spring and drive belt for the mower. Planning on doing the parts swap in the next few days. The idler bracket hole where the spring goes is getting pretty worn out also and needs welded up. More like a slot now than a hole for holding the spring.
@SFCStevens
3 жыл бұрын
@@joeholland428 Did replacing the the pulleys help? I'm going through this same issue.
@SFCStevens
3 жыл бұрын
@@yourjoint9099 What's the idler arm? I'm going through this now..
Drive belt how to put it on
@JerryNeal-xp6gp
2 ай бұрын
Drive belt how to put the drive belt on
thx for the video ... the size bolts on this deck are SAE NOT Metric!! tha annoying nut you took off with an impact gun is 5/8"
where did you buy the belt for that mower?
@xctome
4 жыл бұрын
i own a small engine repair shop so i have parts readily available from different vendors. any small engine / lawn mower shop can get this belt.
And how to take the deck down and re install and most important you dont show how finish the procedure:I lost my time.
Well if you can’t put a belt on that deck I prefer you never touch it that’s prob the easiest one I’ve ever seen