How To Replace the Clamps On A Battery Charger
Фильм және анимация
Originally Recorded
April 11th 2017
I show you how to replace the clamps or clips on a standard household battery charger. As you can see the old ones were in bad shape and needed to be replaced.
Tools you will need,
Wire strippers
Pliers
Пікірлер: 15
I would put a little solder on the wire and clip make a good solid connection
He goes off screen and you can’t see what he’s doing.
Some one gave me a shop battery charger with no clamps, how do I know what cable is the positive?
What wire size did you use?
@lexmarks567
4 жыл бұрын
I didn't replace the wires just the clamps. The wire is factory and original.
If u have a charger that has both terminals removed how do u tell which is which
@JArtMiller
4 жыл бұрын
That is my question I'm trying to answer.
@Devilspocket2002
4 жыл бұрын
@@JArtMiller use a volt meter. if it shows -12 volts then its backwards positive 12 volts means its correct
@JArtMiller
4 жыл бұрын
@@Devilspocket2002 Thank you for your reply. After I thought about it, that's exactly what I did. Thanks gain....JAM
@trinketstuff418
3 жыл бұрын
Volt meter
Adjust ur camera and clean ur table off
I use a lighter to take the insulation off , much better and faster for me anyways
Would be ok but most of what you do is off camera.