Buy Now!
New Steering Rack & Pinion Bellow from 1AAuto.com 1aau.to/ia/1ASTB00046
This video shows you how to install a new steering rack bellows boot on your 2012-2020 Ford Focus.
The steering rack bellow is a plastic or rubber cover used to protect the joint between the steering rack and the tie rods from dirt, debris, water, and other contaminants that could corrode or damage the tie rod joint.
This process should be similar on the following vehicles:
2012 Ford Focus
2013 Ford Focus
2014 Ford Focus
2015 Ford Focus
2016 Ford Focus
2017 Ford Focus
2018 Ford Focus
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 24mm Wrench
• 15mm Socket 1aau.to/oa/1AXAA00015
• 16mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 24mm Socket
• Locking Pliers 1aau.to/oa/1AXAA00139
• 3/8 Inch Air Impact Gun
• Torque Wrench 1aau.to/oa/1AXAA00044
• Copper Anti-Seize
• Cotter Pin
• Wire Ties
• Hammer 1aau.to/oa/1AXAA00091
• Rubber Mallet 1aau.to/oa/1AXAA00413
Subscribe: / @trq
Check out our playlist:
Ford Focus 2012-2020 3rd Generation: • Ford Focus 2012-2020 3...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.