How to replace sliding glass patio door wheels / rollers
Тәжірибелік нұсқаулар және стиль
This video will show you how to replace the wheels / rollers on a sliding glass patio door. I will show you how to remove the door , remove the wheel / roller , install the new wheel / roller and then install the sliding glass patio door back again. This is a very simple process and although many door may differ in the design of the wheels or carriers the process will be very similar to do. LIKE COMMENT and SUBSCRIBE for more videos. #DIY #howto #billshowto Your donations help me to keep helping you .....
www.paypal.com/donate?hosted_...
Пікірлер: 63
Right to the point. Other guys take five minutes to tell you their life story.
@voodooch11d
3 жыл бұрын
🤣🤣🤣 best comment
@radhakishankonda3102
3 жыл бұрын
@@voodooch11d Dgg
@Leopard_Lover
2 жыл бұрын
🤣🤣 legit. Totally just went through that until I found this video haha
Great explanation. No stretched out B.S. like a lot of videos. Just straight to the point and clear. Thanks. Keep up the good work.
Thanks Aussie Bill 🇦🇺🦘
Thanks for being QUICK about telling us how to do this... These other channels seem they to want to bore you with their life stories, blah blah blah blah....RIGHT TO THE POINT HERE ! Thanks again !
@billshowto
3 жыл бұрын
👍
Thank you! Fml I spent ages looking for a clear, concise and closeup demonstration of how to do this. Bloody glad I found this. Cheers gangster
@billshowto
2 жыл бұрын
👍
This video needs Millions more views, saves you hundreds of dollars & straight to the point. Thank you !!
@billshowto
2 жыл бұрын
You’re welcome 👍
Nice video and so helpful thanks my bro.
Just wanted to say thank you for the helpful video.
As easy and straight to the point as that. Thank you for such an insightful video 👌🏾👌🏾
@billshowto
2 жыл бұрын
👍
Nice video... If I may add, some older style doors have in interior upper closure of sorts that needs to be removed to allow the top of the door to tip out (as opposed the bottom). You would figure this out right away, if your door does not lift high enough into the upper channel to allow the door to tip out from the bottom. 6 or so screws removes the part.
Hello from South Africa. This was such a great help thank you!
Short and sweet. Good video.
To the point cheers cuz no life Story no bs
@billshowto
2 жыл бұрын
Lol you’re welcome 👍
Awesome Bill, really appreciate the how to’s. Keep them coming
Well done. Very nicely solved the issue in a few minutes 👍👍
Great video. Fixed. Thanks
Thanks mate.
Simple and clear. Thanks for sharing. ;-)
@billshowto
4 жыл бұрын
👍
Thanks Bill 👍🏽🍻
Thanks for the advice mate.
@billshowto
4 жыл бұрын
You’re welcome
this was sooooo helpful my bro cheers for this
The man Billy 👍
_Tip:_ If you do buy a new wheel, make sure to measure the old wheel with calipers to get the correct size, especially the axle as it can protrude preventing it from being installed.
great video.
@billshowto
Жыл бұрын
👍
Thanks mate, was almost at the point of smashing the whole door! Rollers out off to Bunnings, cheers
@billshowto
3 жыл бұрын
You’re welcome
This is fantastic video. I have a 4 panel double sliding door. This method works for one side but not the other as the design is a little different. Any ideas?
Very good thanks.
@billshowto
3 жыл бұрын
👍
You legend, my next job, that i still haven't done
@billshowto
4 жыл бұрын
Add it to the never ending “yo do “ list 👍
Good old Aussie's. Straight to the point. Easy in under 4 minutes. Well done mate.
@billshowto
4 жыл бұрын
You’re very welcome 👍
@liamwindsor5854
Жыл бұрын
1/2 Aussie 1/2 lebo is my guess lol
please do a video on removal and replace roller into the carriage.
Aww. Give us the life story! Just kidding. Good short to the point video. Thanks
@billshowto
3 жыл бұрын
👍👍
Ela mate, im struggling to lift my glass sliding door out. Looks like there is some sort of frame down the bottom on the inside 🤷🏻♂️🤷🏻♂️
Why is it that none of my house's fittings ever match anything on KZread videos?
What do I do if scre won't come out
race you i look have no assembly it gone so half done without starting maybe i grease lol thanks
How do you remove the whole carriage?
i couldnt get mine out, so pried with a screw diver, now i cant get the bludger back in! Anyone got any ideas with a stegbar door?
@billshowto
3 жыл бұрын
Sometimes you have to remove the frame to slide the new carrier in and out
@essellohbeebeewhy
3 жыл бұрын
@@billshowto thanks mate.. Think I stuffed it then cos i used a box cutter to cut some slots! 🤣 I'll have to pay someone now I think! 🤣
@billshowto
3 жыл бұрын
Lol send me a photo and I’ll try help you out 👍
@moffatk7948
2 жыл бұрын
Great video straight forward to the point. I struggled at first because I was trying to figure how its removed, to replace wheels was like a 5 minute job. Now got the hang of it.
Never shoot a video against the bright sunlight this will make your camera crazy ;)
We manufacture this roller. Anybody can contact me any time.
hi, we are sliding roller factory from China, hoping to provide high quality and low price sliding roller for windows and door for you.