No talking no intro ,just got to the point and very helpfull cheers mate
@austomj3 жыл бұрын
Thank you for not playing loud annoying music in the background!
@haroldgeorge4222
2 жыл бұрын
Ya that music bugs me too. LOL 😆
@helenharder19554 жыл бұрын
Thanks so much for this, I’m a single mum and was able to fix both my shower taps without calling a plumber. God bless.❤️
@bushwalker6214
4 жыл бұрын
Plumbers must hate this video!
@Miawallce80
Жыл бұрын
Same here I’m flat broke and it’s Easter weekend so I’m gonna try it myself 😊
@tessi-annroberts1983
Жыл бұрын
Single lady here but I don't know the name of the tools used😢😢😢
@crazygrandma6366 Жыл бұрын
Thankyou. Quoted $400 to change 4 washers by a plumber. This way it will only cost me the tools and washers.. I am so grateful for this basic step by step video and as a single person it has helped my bank account. Once again Thankyou
@karmicselling42524 жыл бұрын
The tool used is called a Tube Socket Spanner. Available in a range of shapes and sizes from local Hardware Stores. Common shapes are Hex or Square. Typical sizes for taps range from 15mm to 25mm. Most modern taps use Metric sizes. Older taps used Imperial sizes.Always confirm the correct shape and size before using the tool otherwise fittings can be damaged. Always rotate the fitting in the correct direction. Normally, Anti-clockwise to loosen. Clockwise to tighten. But always check. Never apply too much force. If the fitting seems to be very tight or stuck, apply a rust remover like WD-40 or CRC, wait a few hours, and then try to remove it. If it won't budge, try using a larger lever with the tool. If it still won't move call a Professional. A broken fitting in-situ is very difficult to fix and will usually require a plumber to repair the damage.
@CheesyPumbah
3 жыл бұрын
Dumbest design. Can’t tighten with typical household tools.
@airbnbgirllaura
Жыл бұрын
You've saved me hours of searching online for "tube wrench plumbers use." Be blessed!
@Ankitsharma-ht7kk
Жыл бұрын
Thank you so much for this information.you saved me a lot of time
@CleverCreatives4 жыл бұрын
Thank you for posting this. I followed your video and was able to replace my shower tap today. Saves me having to wait for the plumber and landlord, and in the process lost time at work.
@sushimamba42814 жыл бұрын
Thanks. Last time I called a plumber for a simple fix like this it was nearly $300 for 18 minutes on the job!
@earthsister12 жыл бұрын
Fabulous educational resource, we should have been taught these practical life skills in school. Thanks for sharing
@spathi3309
Жыл бұрын
Seems like the kind of thing parents should pass on.
@MissShazJones Жыл бұрын
Thank you for sharing. I thought I'd have to call someone out on the weekend when my tap popped off and fell into the sink last night, but this video made it so easy to fix myself. I would've been clueless without it. Much appreciated!
@alinedeleandro1234 жыл бұрын
Thank you. You were very meticulous and easy to follow. The quote we got for bath & shower tap replacement was $620.
@XxmadmanXx101
4 жыл бұрын
Aline de Leandro what did u do fix them your self or get a cheaper plumber ?
@TheMaggotrot4 жыл бұрын
1:23 saved the day. Lefty loosey still applies. Cheers mate!
@neethamartin5 жыл бұрын
Saved $300 😊. Thank you so much!!
@integr8nfp4234 жыл бұрын
Appreciate the post, exactly the pre-check I needed. Very helpful, thank you.
@lakshmiiyer40032 жыл бұрын
Thanks a lot for this video. Step by step video was easy to follow and helped me fix my shower tap. 🙏
@christianvanneuves99582 жыл бұрын
The most useful video on the issue here. Thanks, maestro!
@sarahlange10025 жыл бұрын
Thanks you for positing this. Very, very, very helpful!
@jansteel29184 жыл бұрын
Thankyou thankyou ! I couldnt figure out to take tap apart but you made it easy.
@sharonthrift5030 Жыл бұрын
I have never done this before. Thank you for posting. Going to tackle my shower in a few minutes 😊
@juliescott94853 жыл бұрын
Thank you so much. Great and easy to follow presentation.
@patrice19813 жыл бұрын
This is so helpful. Now I can do it by myself.
@rennmaxbeta4 жыл бұрын
Great vid, very helpful, thanks
@kurt51944 жыл бұрын
Perfect, thank you so much!
@heathergrahame96473 жыл бұрын
Thank you! Wonderful video.
@wizdude9 ай бұрын
Thanks bro. This helped for taps that I needed to change. Cheers.
@jtsscalemodels21975 ай бұрын
Thank you for making this video!...very well made tutorial!
@user-ov8sv9ns5l2 ай бұрын
Useful video. Thank you from Singapore.
@hmurray5645Ай бұрын
Unreal! Super handy mate
@Alice_Walker5 жыл бұрын
I can do that! Thank you so much!!
@jonlewis51213 жыл бұрын
Thank you! Is there an o ring in the spindal, if so how would you know when need changing?
@skyresechris7824 жыл бұрын
This is very very helpful I so much appreciate
@norman-gregory Жыл бұрын
Tradesman usually do a good job. But there pricing is always expensive... Some good basics right here! Thank you.
@aussiecoastie725 жыл бұрын
Extremely helpful , thank you .
@jemimahkendall6579 Жыл бұрын
This video is excellent, I know exactly what I need to do
@davidespinozareyes21504 жыл бұрын
Thanks heaps Mate!!!
@PTFSUn-official Жыл бұрын
Thank you very much. It made my day
@missmjl24684 жыл бұрын
Too easy, thanks!
@haydenwilsonx3 жыл бұрын
So easy to follow - tackling this tomorrow!
@donnachambers2712 жыл бұрын
Thank you for saving me!!!
@sharwen75 жыл бұрын
Very helpful mate
@petrinaerskine1195
5 жыл бұрын
fantastic, easy as video and no yacking to complicate things.
@bassambassam8081 Жыл бұрын
thank you for sharing this useful video
@sannygooden23332 жыл бұрын
Fantastic ... To the point
@GG-tk8cq4 жыл бұрын
what’s happens if the actual tap doesn’t have an outside nut ? i can’t seem to get them off as nothing to undo...
@graphicsdesignbdtutorial Жыл бұрын
Thanks Your Tutorial
@cathyduong57094 жыл бұрын
Thank you very much
@mianz472 жыл бұрын
Nice and easy video 👍👍
@mohammadranamawa67952 ай бұрын
I want to know- what size this wrench
@LukeJonesAU Жыл бұрын
Love it
@who_thekaushik3 жыл бұрын
What this changing of washer do to my shawer? Please tell me if this also work for water running after turning off the shower , its unstoppable.... What to do
@Prizm44
Жыл бұрын
Yes, replacing the washer is the first thing to try if your shower drips after turning it off, or if you have to turn the tap off very tight to stop water from dripping.
@Penfolds52 жыл бұрын
I find mine are on way too tight and i can't get them off. Any help please?
@petrahatu99743 жыл бұрын
Thanks 🙏😃
@user-ih5hx8ke9s3 ай бұрын
on point ty
@haioujin796410 ай бұрын
Can not get the white washer out because it is so big. Anything solution?
@creamcookies9994 жыл бұрын
What kind of wrench is that? Need to find similar one
@KiloOscarZulu
4 жыл бұрын
It's called a tap spanner www.bunnings.com.au/craftright-3-piece-tap-spanner-set_p6110222
@johnvienta7622
4 жыл бұрын
It is called a tube or box spanner in Australia. The size for my laundry tub taps was 19mm from memory. They are also useful for jobs such as removing kitchen mixer taps, around 12mm.
@agallagher59365 жыл бұрын
What's the name of the tool used to remove the big metal thing just before the washer?
@nacnudnz
5 жыл бұрын
It's a pressed steel box wrench or tubular wrench, the name varies depending on what part of the world you live in. A cheap version of a tube socket or deep socket. The holes negate the need for the square drive on a ratchet or similar.
@Radmack
5 жыл бұрын
Tube spanner
@originalnocomment
5 жыл бұрын
a box spanner.
@GreatMochaChino
5 жыл бұрын
Socket
@fragglepuppies
5 жыл бұрын
Tube socket. Plumbing area at hardware stores.
@zachariahrowland63002 жыл бұрын
Dammit I bought a shifter today thinking that will be the tool lol 😂😂😂
@anhlangthang38813 жыл бұрын
❤️❤️❤️👍
@leonotorongo20496 ай бұрын
Cheers
@TheBeccstar Жыл бұрын
Not saying that this is not good video, but as someone coming here who has never done this before a list of tools used would be nice, bc it's not just washers I'll have to go and buy from bunnings
I've been looking around because I need one and found something very similar and it is called Tap Spanner... found it on the Bunnings website. Hope this helps.
@LAfunk750
4 жыл бұрын
tube spanner
@johnharvey4496
4 жыл бұрын
That'd be a "tube spanner", a "tube" spanner...
@KiloOscarZulu
4 жыл бұрын
It's called a tap spanner www.bunnings.com.au/craftright-3-piece-tap-spanner-set_p6110222
@AdA-rl4eo2 жыл бұрын
❤️👍🇦🇺
@sskhaliq5 жыл бұрын
Australia, this is thanks to immigration, knowledge sharing...Awesome
@jezeremyhubert
5 жыл бұрын
What has immigration got to do with knowledge sharing?
Пікірлер: 107
No talking no intro ,just got to the point and very helpfull cheers mate
Thank you for not playing loud annoying music in the background!
@haroldgeorge4222
2 жыл бұрын
Ya that music bugs me too. LOL 😆
Thanks so much for this, I’m a single mum and was able to fix both my shower taps without calling a plumber. God bless.❤️
@bushwalker6214
4 жыл бұрын
Plumbers must hate this video!
@Miawallce80
Жыл бұрын
Same here I’m flat broke and it’s Easter weekend so I’m gonna try it myself 😊
@tessi-annroberts1983
Жыл бұрын
Single lady here but I don't know the name of the tools used😢😢😢
Thankyou. Quoted $400 to change 4 washers by a plumber. This way it will only cost me the tools and washers.. I am so grateful for this basic step by step video and as a single person it has helped my bank account. Once again Thankyou
The tool used is called a Tube Socket Spanner. Available in a range of shapes and sizes from local Hardware Stores. Common shapes are Hex or Square. Typical sizes for taps range from 15mm to 25mm. Most modern taps use Metric sizes. Older taps used Imperial sizes.Always confirm the correct shape and size before using the tool otherwise fittings can be damaged. Always rotate the fitting in the correct direction. Normally, Anti-clockwise to loosen. Clockwise to tighten. But always check. Never apply too much force. If the fitting seems to be very tight or stuck, apply a rust remover like WD-40 or CRC, wait a few hours, and then try to remove it. If it won't budge, try using a larger lever with the tool. If it still won't move call a Professional. A broken fitting in-situ is very difficult to fix and will usually require a plumber to repair the damage.
@CheesyPumbah
3 жыл бұрын
Dumbest design. Can’t tighten with typical household tools.
@airbnbgirllaura
Жыл бұрын
You've saved me hours of searching online for "tube wrench plumbers use." Be blessed!
@Ankitsharma-ht7kk
Жыл бұрын
Thank you so much for this information.you saved me a lot of time
Thank you for posting this. I followed your video and was able to replace my shower tap today. Saves me having to wait for the plumber and landlord, and in the process lost time at work.
Thanks. Last time I called a plumber for a simple fix like this it was nearly $300 for 18 minutes on the job!
Fabulous educational resource, we should have been taught these practical life skills in school. Thanks for sharing
@spathi3309
Жыл бұрын
Seems like the kind of thing parents should pass on.
Thank you for sharing. I thought I'd have to call someone out on the weekend when my tap popped off and fell into the sink last night, but this video made it so easy to fix myself. I would've been clueless without it. Much appreciated!
Thank you. You were very meticulous and easy to follow. The quote we got for bath & shower tap replacement was $620.
@XxmadmanXx101
4 жыл бұрын
Aline de Leandro what did u do fix them your self or get a cheaper plumber ?
1:23 saved the day. Lefty loosey still applies. Cheers mate!
Saved $300 😊. Thank you so much!!
Appreciate the post, exactly the pre-check I needed. Very helpful, thank you.
Thanks a lot for this video. Step by step video was easy to follow and helped me fix my shower tap. 🙏
The most useful video on the issue here. Thanks, maestro!
Thanks you for positing this. Very, very, very helpful!
Thankyou thankyou ! I couldnt figure out to take tap apart but you made it easy.
I have never done this before. Thank you for posting. Going to tackle my shower in a few minutes 😊
Thank you so much. Great and easy to follow presentation.
This is so helpful. Now I can do it by myself.
Great vid, very helpful, thanks
Perfect, thank you so much!
Thank you! Wonderful video.
Thanks bro. This helped for taps that I needed to change. Cheers.
Thank you for making this video!...very well made tutorial!
Useful video. Thank you from Singapore.
Unreal! Super handy mate
I can do that! Thank you so much!!
Thank you! Is there an o ring in the spindal, if so how would you know when need changing?
This is very very helpful I so much appreciate
Tradesman usually do a good job. But there pricing is always expensive... Some good basics right here! Thank you.
Extremely helpful , thank you .
This video is excellent, I know exactly what I need to do
Thanks heaps Mate!!!
Thank you very much. It made my day
Too easy, thanks!
So easy to follow - tackling this tomorrow!
Thank you for saving me!!!
Very helpful mate
@petrinaerskine1195
5 жыл бұрын
fantastic, easy as video and no yacking to complicate things.
thank you for sharing this useful video
Fantastic ... To the point
what’s happens if the actual tap doesn’t have an outside nut ? i can’t seem to get them off as nothing to undo...
Thanks Your Tutorial
Thank you very much
Nice and easy video 👍👍
I want to know- what size this wrench
Love it
What this changing of washer do to my shawer? Please tell me if this also work for water running after turning off the shower , its unstoppable.... What to do
@Prizm44
Жыл бұрын
Yes, replacing the washer is the first thing to try if your shower drips after turning it off, or if you have to turn the tap off very tight to stop water from dripping.
I find mine are on way too tight and i can't get them off. Any help please?
Thanks 🙏😃
on point ty
Can not get the white washer out because it is so big. Anything solution?
What kind of wrench is that? Need to find similar one
@KiloOscarZulu
4 жыл бұрын
It's called a tap spanner www.bunnings.com.au/craftright-3-piece-tap-spanner-set_p6110222
@johnvienta7622
4 жыл бұрын
It is called a tube or box spanner in Australia. The size for my laundry tub taps was 19mm from memory. They are also useful for jobs such as removing kitchen mixer taps, around 12mm.
What's the name of the tool used to remove the big metal thing just before the washer?
@nacnudnz
5 жыл бұрын
It's a pressed steel box wrench or tubular wrench, the name varies depending on what part of the world you live in. A cheap version of a tube socket or deep socket. The holes negate the need for the square drive on a ratchet or similar.
@Radmack
5 жыл бұрын
Tube spanner
@originalnocomment
5 жыл бұрын
a box spanner.
@GreatMochaChino
5 жыл бұрын
Socket
@fragglepuppies
5 жыл бұрын
Tube socket. Plumbing area at hardware stores.
Dammit I bought a shifter today thinking that will be the tool lol 😂😂😂
❤️❤️❤️👍
Cheers
Not saying that this is not good video, but as someone coming here who has never done this before a list of tools used would be nice, bc it's not just washers I'll have to go and buy from bunnings
Whats the name of the tool at 1:13
@tye595
4 жыл бұрын
www.bunnings.com.au/craftright-3-piece-tap-spanner-set_p6110222
@senorkapowssite
4 жыл бұрын
I've been looking around because I need one and found something very similar and it is called Tap Spanner... found it on the Bunnings website. Hope this helps.
@LAfunk750
4 жыл бұрын
tube spanner
@johnharvey4496
4 жыл бұрын
That'd be a "tube spanner", a "tube" spanner...
@KiloOscarZulu
4 жыл бұрын
It's called a tap spanner www.bunnings.com.au/craftright-3-piece-tap-spanner-set_p6110222
❤️👍🇦🇺
Australia, this is thanks to immigration, knowledge sharing...Awesome
@jezeremyhubert
5 жыл бұрын
What has immigration got to do with knowledge sharing?
@sterlinga8307
4 жыл бұрын
????????????????????????????????????