Very helpful. Just did my 95 Corolla wagon. Had to remove washer fluid reservoir, move cruise control, and move A/C lines. I am an amateur at being a mechanic, but your video made the job much easier. Thank you!

@PeterFinnTheCarDoctor

6 жыл бұрын

Thank You for comment. :-)

@ethanmiles20

3 жыл бұрын

How did you move ac lines??

Great Video. You actually showed us how to do it. I watched another useless video where the guy just talked about it.

@PeterFinnTheCarDoctor

8 жыл бұрын

Hi and Thanks for feedback. :-)

@Orphancripplr

Жыл бұрын

My go to guy for my toyota.

Wow! I've been looking for this video where you actually take the motor mount out and not just telling how to do it. I am the type of person who actually needs to see how it's done. It would have been nice if you showed us where exactly you put the floor jack and actually install the new one, but this is really helpful. Thanks.

@PeterFinnTheCarDoctor

7 жыл бұрын

Ok and Thanks for info.

very good videos, i learn a lot from you Peter i have a 1992 Toyota corolla still running great. thanks for your informative videos

@PeterFinnTheCarDoctor

6 жыл бұрын

Thank You for comment. :-)

Excellent video! Thank you so very much!

@PeterFinnTheCarDoctor

2 жыл бұрын

You're very welcome!

first you have to lift the car under the drain oil box and put a piece of thick wood for protection then remove the windshield fluid reservoir then you can work on your motor mount.

@PeterFinnTheCarDoctor

8 жыл бұрын

Thanks, Your comment is great. :-)

@pacmang9810

7 жыл бұрын

This was my question. Thank you.

thank you very much now i get how to change it.

@PeterFinnTheCarDoctor

7 жыл бұрын

Thank You and You are welcome. :-)

Auto shop spotted the left side of the engine shaking and diagnosed that broken mount. That was six months ago. Do I risks breaking something else by not replacing that mount?Only 105K on the car. I am more concerned about its brakes, which I can do myself.

@PeterFinnTheCarDoctor

Жыл бұрын

I have read your message, Thank you 😀👍

nice work Peter

@PeterFinnTheCarDoctor

8 жыл бұрын

+Micro Master Hi, many thanks for feedback. :-)

Thanks! Your the best 97 corolla guy) where are you from. I'm from california)

@PeterFinnTheCarDoctor

2 жыл бұрын

Glad to help👍

@HassanIsa-uj6lq

9 ай бұрын

@PeterFinnTheCarDoctor nice work , keep it up bro!

Thanks for the great video Toyota Corolla 1997 have 4 mounts or 3 ??

@PeterFinnTheCarDoctor

2 жыл бұрын

4

@NMSHAFKI

2 жыл бұрын

@@PeterFinnTheCarDoctor thanks mate! 🙂👍

Great video Peter, I've watched several of yours and they're all very good! Do you have one that shows how you jacked and supported the engine to replace the mount?

@PeterFinnTheCarDoctor

7 жыл бұрын

Hi, I use jack and crane below the engine oil sump. So I lift the engine by oil sump area carefully.

@lewidlivelewid

7 жыл бұрын

Thanks for the quick reply! My plan is to carefully use a floor jack and some thick wood under the oil pan. I'll be doing the timing belt replace after seeing your very helpful video on that subject on my 1991 Corolla. Thanks again.

@PeterFinnTheCarDoctor

7 жыл бұрын

Good idea

You have to take the cap off of the engine???

@PeterFinnTheCarDoctor

2 жыл бұрын

Yes

Can anyone tell me if the engine mount is different on a manual 4afe vs an automatic 4afe? I blew my manual engine, and swapped only the engine from an automatic, but kept the engine mount from the auto engine and ever since, my left side cv shaft keeps popping out from the inner boot section, and im thinking the auto mount is shorter than the manual mount, therefor stretching out the left shaft

@PeterFinnTheCarDoctor

4 жыл бұрын

Thank You 👍. I read your message. 😀

Thank you for the video Peter, I did the same on my car but it doesn't have the 2 nuts in the bottom , do you know what size are them?

@PeterFinnTheCarDoctor

6 жыл бұрын

14 mm

@dlizaola007

6 жыл бұрын

Peter Finn Thank you , you're the best!

Hi Peter great video, got mine out but now when my new motor mount came i have to removethe big bolt from the old mount to use with the new mount cannot get the bolt loose any suggestions

@mikeharman519

6 жыл бұрын

Got it used a tire iron and screwed down to my workbench

@PeterFinnTheCarDoctor

5 жыл бұрын

Good. :-)

@briangee4561

3 жыл бұрын

Fuck me. I’m battling with that 19mm bolt. I cannot get it out. No work bench to bolt it down to either. Going to have to somehow get some leverage on it

@briangee4561

3 жыл бұрын

Nvm I just got it. Took three slices of pizza and some pure man power. I just bolted the mount back on the car and used a 17mm wrench on the end of the 19mm wrench to get extra leverage. And some WD of course. Good luck to anyone else

What are the torque specs for the engine mount?

@PeterFinnTheCarDoctor

2 жыл бұрын

60 Nm

@thatshot-ey8kh

2 жыл бұрын

@@PeterFinnTheCarDoctor Thanks! 👍

Can this be done without supporting the engine?

@PeterFinnTheCarDoctor

2 жыл бұрын

Yes

@inhibited44

Жыл бұрын

@@PeterFinnTheCarDoctor That's an interesting response. I guess the three other motor mounts can support it for a few minutes.

@inhibited44

Жыл бұрын

Wow, I was here five months ago and don't remember watching this.

Will this fix vibration at idle?

@PeterFinnTheCarDoctor

6 жыл бұрын

Yes

what year is it? is it the same for 1998?

@PeterFinnTheCarDoctor

8 жыл бұрын

1995