How To Replace Rear Window Regulator 2000-2006 Chevy Tahoe
Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ia/1AWR...
Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle! This video shows you how to replace both the window regulator and the motor on your 2000-2006 Chevy Tahoe.
• Check here for more videos on the 2000-06 Chevy Tahoe • Chevy Tahoe 2000-06 2n...
This process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ofZ/1AX...
• Pocket Screwdriver
• 10mm Socket 1aau.to/oeY/1AX...
• 7mm Socket 1aau.to/oeY/1AX...
• Trim Tool Set 1aau.to/obJ/1AX...
• Bent Nose Pliers
• Painter's Tape
Subscribe: / @trq
Check out our playlist:
Chevy Tahoe 2000-06 2nd Generation: • Chevy Tahoe 2000-06 2n...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 110
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
Got the part and went to the park and fixed it in less than 45 minutes. Thank you for this awesome video.
You are the father I never had. Thank you. I was able to replace my window regulator with your help
One of the best videos I’ve ever used to repair something! Detailed and was the exact steps needed to complete the job. Thanks
Very well done video. Any DIY-er can easily follow this one and end up with the job well done. Thanks for taking the time!
Thank You so much. Due to this video I was able to make the repair on my 2004 Tahoe in less then 1/2 hour.
Great video. I purchased the regulator almost 2 years ago but was apprehensive about doing it. I re watched your video this morning and tackled it. It was surprisingly easy. Had it done in 15 minutes. Great Job, Thank You
Thank you! It took us a while, but we got it done. Thank you for posting.
I've watched several vids for replacing this part and yours is by far the best! Not only well filmed and well spoken but thoroughly detailed. The only one I saw showing the extra steps of completely removing the handle, plastic and speaker. Then on the installation you showed bending the 2 tabs and spec'd the 80 inch lbs on the regulator bolts. No one else I saw did that. So thank you very much for your efforts! Now where do I order a Diesel Performance Window Regulator??.
@TRQ
3 жыл бұрын
+DMax ! Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/ia/1AWRG01507
@wildcountrykat
Ай бұрын
I Agree 100% !! 😊
The best how to video on KZread for this job saved me a lot of time and headaches. Thank you!!!
We’re on a road trip and we just stopped to buy this part and are going to fix it *right now* in a random parking lot o-o
@TRQ
3 жыл бұрын
+Monkey Chief Good Luck! Thanks for watching our video! 1aau.to/m/Shop-TRQ
@useritscarrot
Жыл бұрын
Were you able to do it?
Thank you, not as hard as I thought. Getting the regulator out and in wasn't hard. Not including taking panel off and putting panel back on maybe took 10 minutes and that is checking that it worked.
Thank you! Just what I needed to see. I'd gotten the door panel off but couldn't figure out how I would get the regulator out because other videos didn't cover what my 2000 Tahoe looked like. Gotta remove the speaker! Very helpful. Thanks again.
@TRQ
8 ай бұрын
+@patrickparker228 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
This video helped me so much. I saved my self close to $200 l spent only 144 because I installed my self thank very much.
This was the best video! Straight to the point, easy to follow.
@TRQ
3 жыл бұрын
+Kimberly Johnson Thanks for watching our video! 1aau.to/m/Shop-TRQ
The BEST Video ( By Farrrr ) That I've Seen On Replacing this !! THANK-YOU !! 😊⚘️ ★★★★★
Perfect vid for my 2003 Suburban. My window holders were wider on the window than yours by about 4 inches each side. Other than that, 100% perfect vid. Thank you so much!!
I noticed your video the window was up. What if mine is all the way down, can I still do exactly how you did it? Lmk, thanks. Nice detailed video though! Two Thumbs up from me!
Thank you for making this video, it was perfect. Got the job done in 1/2 an hour.
Easier than it seems just watch it step by step literally paused it one step at it time.. saved my girls truck lots of money this weekend 👍🏽
Thank you sir! Couldn’t have done it without your step by step.
This was a huge help, made replacing mine very easy. Thank you
Wait wait if the regulator isn’t working that’s why its being replaced! How do i bring it down???!!!
@paulm7325
2 жыл бұрын
I'm in the same predicament. Mine doesn't work, won't go down...
Thanks for posting this video. In these tough economic times, you definitely saved me some cash. Thanks again!
@TRQ
6 ай бұрын
+@malone6005 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Just saved me 350 bucks!! Thank you!!
Just replaced mine with the help of this video. Thanks!
Many thanks!! Was able to follow step by step. Fixed!!
Great video and detail in the removal and replacement of the part.
Wouldnt have been able to do this without this vid, good job and thanks!
Much appreciated, your video was awesome..one less thing on my plate! Thank You
Hello thanks for the video, I need to change manual to electric, for a chevy silverado 2013 short cab, but I do no know if the internal system is possible to put the electrical original AC delco or generic whit a some litle changes. can you helpme whit this information ??
Great video. Very Detailed it will make the job easier. Thanks
Wait is the regualr is not working and its up how do i bring it down?
Is this the same regulator for the driver passenger rear side as well?
yeah if im replacing a part its because it does not work so showing the repair by moving the bracket with the switch is pointless but great demonstration vid for how to repair a part if it still works.
I’m curious if anyone else has issues with the roll up speed on their new one. I just replaced this on my 2005 Tahoe and the motor rolls up noticeably slower than any of the OEM windows. Does anyone else have this issue? I also noticed that the new motor doesn’t have a hole for the wire holding tab like the original.
This video was very helpful to me. Thanks
@TRQ
3 жыл бұрын
+Bruce Weissman Thanks for the feedback! 1aau.to/m/Shop-TRQ
I have to do the passenger side front window. Looks like same Process?
Amazing explanation. Thank you
You video is the only one I've watched that actually shows what to tighten the bolts to that actually hold the window 80 inch LBS. Would this be the same for the front window regulator also?
great easy to understand video! Thanks!
Thank you. Great advice and help
Thanks you, saved me $150 labor.
Is there any way to just replace the motor not the whole thing?
Very helpful video.I will save money my self.
@TRQ
2 жыл бұрын
+Jose Duarte Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thanks not very mechanically inclined and was able to do it myself Thanks again
Thanks for the video, and yes ... make sure to loosen the bolts on the regulator so the window slides in!
@alarkyt9966
3 жыл бұрын
I struggled a lot because I didn’t loosen up the bolts on the window regulator
Excellent vidio thank you
Thanks... Subscribed, after finding out that mechanics charge around $150-260 just to change out 2 window regulators.😅😋😎
@adriananimationsskits136
3 жыл бұрын
150 sounds fair , but you probably want to pay 30 bucks and expect life time warranty
Very detailed and straight to the point this vid helped a lot
I followed this video and fixed my rear driver side window. Everything is mirrored but these instructions still apply.
you guys are W's man
Great job. Thanks!
Thanks!
The Dealer wanted $600 to replace mine..got it on Ebay, did it myself for $70
Thank you for posting
I need replacement bolts for the window motor and the nuts for the regulator. What size or part number?
Thanks for this video!
Great video! Thanks!
Very GOOD, thank you
Thank for sharing this, I'm going to tackle this shortly.
@TRQ
3 жыл бұрын
+jmf1976jmf Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Very well done.
Can you tell me the correct part number for that regulator? I seem to be seeing several for that year.
Not the same as a 03 suburban… if you know how to do that then please post a video having issues with mine… mine has 2 brackets with regulator connected on one of the brackets. Removed it a year ago now i forgot how to put back in 😅
What parts besides the one provided can i use to replace it?
Mad respect @6:53! Awesome job! How long was that job? Thanks
What if the window is down ? Is it harder to take it off
What if your window is stuck in the down position. Old motor will not move
What’s the machine u used for taking the bolts out
My regulator/assembly will not move at all. It is stuck 3/4 of the way up. Is it safe to assume the motor is bad?
Awesome job. Thanks 👍
Thanks for the video 👍🏾👍🏾
@TRQ
3 жыл бұрын
+Jermaine Knox Thanks for watching our video! 1aau.to/m/Shop-TRQ
The regulator doesn't work. What if i can't run the regulator down as shown? Can I still get the regulator out?
@GuitarP0RN
4 жыл бұрын
Yes, but you'll have to use a wrench to loosen the nuts holding the glass, since you can't access the nuts with a ratchet & socket. It might be a little bit of a contortionist job but you gotta do what you gotta do.... OR you can drill a couple holes to access the nuts
@jackconway596
4 жыл бұрын
@@GuitarP0RN Before I went with this option I tapped on the regulator with a screwdriver handle while holding down the switch. It jolted it enough to get the window to come down so I could get to the window nuts. Also, the video shows the tech using the switch with it still in the door panel. But it's much easier to pry it out of the panel and then connect it.
Bought the part, did it myself (perfectly I might add) and my window still won't move. What else could be the problem?
@TRQ
3 жыл бұрын
+Osie Carter Thanks for watching! There could be multiple things causing your issue, but we are not able to diagnose it for you. If you are unsure we recommend having a reputable shop take a look!
Is it necessary to put back the vapor barrier back? Cuz mine got really torn
@TRQ
3 жыл бұрын
+Jose G Thanks for watching! Yes you will have to pull back the vapor barrier in order to replace the window regulator.
@michaels9657
3 жыл бұрын
You can get one at salvage yard for under 10 bucks
Slightly different than a 2000 GMC Yukon XL, but close enough.
🔥
Before I put it all back together, I would test it with the window installed first...
You just saved me from going to a mechanic
@TRQ
Жыл бұрын
+MrMarc315 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Can I pay you to fix 3 of my windows?
good instruction but the sound of the ratchet is horrible.
my window won`t roll up
I did this to my truck . Now my power locks to that door don't work . Wtf happen??
@Teddybites
3 жыл бұрын
Mine did the same the locking mechanism gave out so you may try buying one of those
How in the hell am I going to roll the window down when the motor don't work?????
@TRQ
3 жыл бұрын
+William Capps Thanks for watching! You can sometimes open up the motor and manually crank it down. If the window is truly stuck then you can always cut the cable to free up the window. You will need the new replacement part on hand to replace it!
Why are you replacing a regulator that is obviously in working order? You are running the window up and down to suit your needs for bolt removal. If the regulator is not working, you can't do that. Some of these how-to videos are really, really stupid.
@dmax06
3 жыл бұрын
Could be like my window situation? Keeps dropping half way down and then won't roll all the way back up. I need to open up the door for access to repair or replace and now I know how. I sure appreciate his efforts!
Great video. You guys do it right
Thanks!