How to Replace Rear Shock Mount 2008-13 Mazda 3
Автокөліктер мен көлік құралдары
Buy Now!
New Shock Mount Kit from 1AAuto.com 1aau.to/ia/1ASMX00089
The rear shock mount safely secures the shock absorber to the mounting point on the body of your vehicle. A rusted or worn mount could allow the shock absorber to move around while driving, which is unsafe and could cause damage. This video shows you how to install a new shock mount on your 2008-13 Mazda 3.
• Check here for more videos on the 2008-13 Mazda 3: • Mazda 3 2nd Generation...
This process should be similar on the following vehicles:
2010 Mazda 3
2011 Mazda 3
2012 Mazda 3
2013 Mazda 3
Tools you will need:
• Socket Driver
• Torque Wrench 1aau.to/odv/1AXAA00044
• Liquid Thread Locker
• RTV
• Floor Jack 1aau.to/obI/1AXAA00068
• Jack Stands 1aau.to/obz/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Mazda 3 2nd Generation 2008-13: • Mazda 3 2nd Generation...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 7
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
PRO TIP When filming a repair tutorial Always tell what size sockets or wrenches you use so the viewer knows what to use when doing his own repair
The gasket maker trick is genius
Good tip on the gasket maker!
How did you keep the shaft from spinning, when you tightened the locking nut back on to the top mount ?
BM shock mount is different.❤
DON'T TIGHTEN TO SPEC!! Mounting bolt for the boot snapped at 20 lbs..