amzn.to/49Crd3k 17-21 CRV Rear Brakes & Rotors

@larryshropshire4747

2 ай бұрын

Was just wondering if you are satisfied with these pads and rotors from Amazon? I need to do this.

You have created two excellent videos for replacing the brake pads and rotors on the Honda CRV. I am so impressed with the step by step details, your clarity of speech and video. Honestly, thank you for sharing your knowledge with those of us who aren’t afraid of working on our own vehicles. I have subscribed.

@OldSoulMillennial

5 ай бұрын

Welcome to the liberation!

That loosening the nut trick really saved me man. You got a new sub! Cheers

Just finished the brake job on my wife’s 2019 crv . Followed your video through the whole job. Worked out great 👍👍 Thank you.

@andresgonzalez6561

3 ай бұрын

So you didn’t need any scan tool as long as you used the correct tool to compress the piston rotating clockwise?

YOU ARE A REAL MASTER!!! YOU EXPLAIN SO WELL. Thank you for your time!

One thing to add is to make sure that you check and loosen the master cylinder cap. If there was no brake fluid added throughout the whole lifespan of the brake pads and rotors; then it's ok. However, when customers take their cars to the shop or dealership, the technicians usually add brake fluid. So when you pump your brake pedal after resetting the caliper piston, it will cause the fluid to go back to the master cylinder. If it's already at max level to begin with, you will have a leak.

What a very well done video. One of the best I've seen on brakes, super clear and concise. Thanks man! I have the same piston compression kit and its a lifesaver. For some reason online a bunch of people made it seem like the rear brakes are extremely difficult to do with the electronic e-brake. After watching your video it seems like a fairly standard Honda brake job.

@OldSoulMillennial

10 ай бұрын

That twist brake compression tool is key (In description). You may have to play around with the pressure you put on the caliper cylinder while rotating. Just be persistent. You got this

Great Video Brother! Thank You for sharing it with us! 👍

Thank you. You made it easy for me.

Thanks for the video! I was going crazy trying to get those caliper pistons twisted down.

@OldSoulMillennial

6 ай бұрын

You got it!

Excellent!

Anyone doing this-look up a video of manually retracting your electronic parking brake, very simple but if u skip this I believe it will wreck the caliper/parking brake and/or throw u a brake code. Just like leg day, It's simple but don't skip it 😂

Hi, Do I need to calibrate the brakes twice afterwards? Saw couple of other videos, they mentioned having to calibrate the brake twice afterwards. Or the lights for brakes will come on. Thank you.

So you dont have to put the car in service mode when you do the breaks, just want to make sure before i do them

@15:13 i skipped or i missed this part. i did not hit the electronic emergency brake. is that ok? tyia!🙏

I noticed that you turn a key to start that 2018 Honda CRV, my 2018 CRV has push button start, and I wasn't aware that a key started any of 2018 CRV's to start them up...

I read online that the lug nuts should tighten to 80lbs. Is that not right?

What is the caliber compression tool used for specifically?

I did the front brakes on Honda CRV , I Was not able to take out the screw on the rotor and I striped the Head of the screw . I decided to replace only the brake pads. The rotor looks ok. I used an impact screw driver that was hard to set it up. Is there a way to extract the stripped screw from the rotor when I need to change the rotor and the pads in the future ? I watched your video to replace the rear brake pads. I was not able to unplug the wiring from the motor. I rented the tool you used to push back the piston but after watching your previous video and your warning not to push the piston without retracting the motor I am afraid to do it with the tool. I like all your videos. the explanation and procedures are excellent. Thank you.

@steve8803

9 ай бұрын

@sameshete7936 Just drill the head of the screw completely off using a spiral drill bit. You don't need to use the screw anyway, it is only there to hold the rotor in place during assembly. You can just spin on a lug nut to hold the rotor in place if need be while you are working on it. The impact screwdriver is perfect to take the screws off. Just insure you use the proper bit and the others should come off no problem. The proper bit is a JIS #3. People think it's a phillips, but it's not and that is why so many people strip the screw.

@pawpower5210

3 ай бұрын

Drill it and use an easy out for the size of drill bit you use...

JIS #3 is the correct bit for the rotor screws. It's very similar to a phillips, but a lot less chance of stripping when using the correct bit. And the lug nuts should be torqued to 80 ft. lbs. Not 105.

@1bcordell

3 ай бұрын

Japanese Industrial Standard. I did not know this ahead of time and used a #3 Phillips and subsequently had to drill out the stripped ALUMINUM screw. Aluminum, really?

@pawpower5210

3 ай бұрын

I guess that depends on mag or standard rim, ya think?

@steve8803

3 ай бұрын

@@pawpower5210 Honda says 80 ft. Lbs. If you have a problem with it, take it up with them.

Very nice. So you don't need to touch the electronic parking brake motor if you have the tool you use to spin the piston?

@OldSoulMillennial

Жыл бұрын

Correct. You may have to play around with the pressure on the tool (Will make sense when you compress the electronic caliper).

Wondering what the torque specs are on the rear brakes for bracket and piston assembly. Thank you. great video

@scottstringham2997

2 ай бұрын

Bracket is 101 ft lbs and caliper is 37 ft lbs.

I have to do it tomorrow And some video showing they unscrew electronic brace and screw some piston I don't know what better

@luicalibre6665

Ай бұрын

There is a video that shows how to connect 12 volts to the EPB connectors and set the EPB to the proper position as to easily compress the calipers.

Can you add the link for the piston compressor i saw in your video? I only see the link for the breaks. Can I buy it on Amazon?

@OldSoulMillennial

3 ай бұрын

There is a link in the description. Look under caliper compression tool.

I thought you needed a computer to disengage the piston for the rear brakes. I tried doing this job myself with brake tool but the piston would only spin and not go down. Was i doing wrong still? My year of car was a 2020

@OldSoulMillennial

5 ай бұрын

No computer needed. You have to spin and compress the brake caliper. I show this in the video. A special brake compression tool is required

Do you have the bleed the brake lines after replacing the pads?

@RICARD01

10 ай бұрын

Negative

@steve8803

9 ай бұрын

No. The lines were not opened so no air could've possibly gotten in.

Did you disconnect the electronic parking brake cable from the rear caliper motor before doing the brakes?

@OldSoulMillennial

Жыл бұрын

No

I have a 2019 CRV EX. Do you need to unplug or do anything special with the Electronic Parking Brake prior to removing the caliper? Thank you.

@OldSoulMillennial

3 ай бұрын

Did you watch the video?

@FuelednFurious

3 ай бұрын

​@@OldSoulMillennial Yes but, I have seen other videos of people unplugging the connector and using a torx head to unwind, that's why I asked.

@OldSoulMillennial

3 ай бұрын

@@FuelednFurious You will be able to compress the rear brake piston with the special twist compression tool I have listed in description. Just takes a little patience. This is how 95% of mechanics do this.

@FuelednFurious

3 ай бұрын

@@OldSoulMillennial I actually have that already. Thanks for this. I guess I didn't need to ask this question since I already knew about compressing. Thanks again! 😎

@OldSoulMillennial

3 ай бұрын

@@FuelednFurious My only tip, you will have to play around with the pressure while compressing. Sometimes, if you compress too hard, you won’t be able to twist the electronic brake back. Generally, light pressure is key.