How to Replace Radiator 03-12 Volvo XC90
Автокөліктер мен көлік құралдары
Buy Now!
New Radiator from 1AAuto.com 1aau.to/ia/1ARAD00874
In the video, 1A Auto shows how to remove and replace a cracked, dirty, bent, broken, or leaking radiator. The video is applicable to the 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, Volvo XC90.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oadq/1AXAA00013
• 10mm Socket 1aau.to/oS3/1AXAA00017
• 12mm Socket 1aau.to/oZE/1AXAA00015
• 14mm Socket 1aau.to/oZE/1AXAA00015
• Plastic Fastener Remover 1aau.to/oaA/1AXAA00290
• Straight Cutters
• Ratchet 1aau.to/oaff/1AXAA00016
• Wire Ties
• Drain Pan 1aau.to/ogt/1AXAA00320
• Floor Jack 1aau.to/oss/1AXAA00068
• Jack Stands 1aau.to/osF/1AXAA00065
• Rubber Mallet 1aau.to/oap/1AXAA00413
For More Info visit us at 1aau.to/h/bPP/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 36
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
Great video, but from personal experience with this task. It's much easier going from the top, especially without a lift. My 2cent
Just done my XC90-V8...... Not as difficult as I anticipated. I found removing the headlamps helped to see things more clearly... (And are they not so fantastically easy to remove?..... Brilliant design there.) Being a non-turbo, there was no intercooler to contend with. Piece of cake. Thanks.
@1AAuto
4 жыл бұрын
+Patagualian Mostly Thanks for checking us out!
@MrChaetasticComedy
2 жыл бұрын
Did you do it on a lift? Or go from the top?
"It's easy, if I can do it, you can do it to!" *puts it on a lift*
Great camera work - I know how tight this area is. Good job!
I did a replacement on my 2001 V70 T5 and it was very challenging.. a total of 6 hours. i have a Quick Jack and it wasnt enough room to come out on the bottom. I had to take out it out from top.
Great video - thanks! Does oil need to be put in to replace the oil the drained out when the coolant lines were removed from the radiator? This step was done at ~10:10 mins into the video.
I actually did this job on the ground and it is possible lol
Would it be possible to drop out the rad + fan as one unit, instead of taking them apart and dropping out the fan first? Thought taking them out as a combined unit would be easier?
@jba6677
Жыл бұрын
There is another video where the tech drops the fan, rad and inter-cooler as on unit. Looks slightly easier.
Awesome video!!
Perfect. Thanks.
Verhicle you say it a few times like that too I thought it's vehicle??? Oh yeah taking the fan out first from the top side is the easiest way to do it done mess with going down below that's looking for trouble. 2 10 millimeter bolts a few wire ties and an electrical connection and the fan can be out in under 5 minutes without fighting with it.
One. Cuestión Sir. I brock the locks of the lines the green ones. And i cant find them, do you know were. Can i find them?
After watching the video I was wondering, if I removed the fan first, when I go to put the radiator back in, could the fan be attached to the hooks on the radiator prior so both the fan and radiator would be reinstalled as one unit? My other thought would be to remove that top metal plate just to give me more space to work in. Would I create any additional problems by removing that metal plate on top? Thank you in advance to anyone that is knowledgable about this. P.S. my son's 2012 XC90 R Design (non turbo) looks as though it has a little more space to work in and I'm uncertain if there are any other issues with that particular model? Thank you again. Sincerely, Charles Abbott
It might to much to do without a lift man is it doable jacked up without ba lift ?
Hi I see you’ve done a lot to the Audi A4 b7 but I can’t find a video of the turbo have you done a video on this ?
@1AAuto
4 жыл бұрын
+Masked Gamer 101 We're always cycling through cars filming hundreds of common repairs for common vehicles every month. We'll add this to our list of repairs to film. Check back again and hopefully we'll have it soon.
You’re a great guy, but this is how vehicles get more damaged...it’s not supposed to be removed from the bottom, the fan is to be removed FIRST
Existe una versión traducida al español?
This looks more complicated than it needs to be. I replaced the ac condenser in a 2004 XC90 and the radiator has overlapping bolts with the condenser ,why are you removing all this extra stuff.
What state are you located in?
This looks like a 2.5 liter engine rather than the twin turbo 2.9 liter.
I wrecked mine I gotta replace the bumber the frame dust plate and radiator
Excellent video...thank you so much!!!!
Vovo xc90 2007 cooling hose 3.2 6 cycler
This guy is a safety officer not a mechanic…..
I’m really afraid of not being able to put it back together
@FabiSZN
3 жыл бұрын
Make notes, take pictures, write a caption on each individual part then just put all back together going backwards. You can do it.
@PedroHernandez-kq1db
2 жыл бұрын
How did it go Henry? Going to do this Sunday any tips?
Not easy
This video would've been a 100x better if you started from the top then worked your way to the bottom instead of going everywhere.
@1AAuto
3 жыл бұрын
+daniel knight Thanks for the feedback!
Doesn't seem so. Easy peasy