Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ib/1ASTE00827
This video shows you how to install new TRQ outer tie rods on your 2007-2015 Mazda CX-9. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.
This process should be similar on the following vehicles:
2007 Mazda CX-9
2008 Mazda CX-9
2009 Mazda CX-9
2010 Mazda CX-9
2011 Mazda CX-9
2012 Mazda CX-9
2013 Mazda CX-9
2014 Mazda CX-9
2015 Mazda CX-9
Tools you will need:
• 13mm Wrench 1aau.to/oPT/1AXAA00010
• 17mm Wrench 1aau.to/oPT/1AXAA00010
• 21mm Deep Socket 1aau.to/o7n/1AXAA00043
• 21mm wrench
• 22mm Wrench
• 18mm Socket 1aau.to/o7n/1AXAA00043
• 21mm Socket 1aau.to/o7n/1AXAA00043
• Inner Tie Rod Removal Tool 1aau.to/oaC/1AXAA00438
• Bent Nose Pliers
• Needle nose pliers 1aau.to/ozE/1AXAA00051
• Needle nose pliers 1aau.to/ozE/1AXAA00052
• Ratchet 1aau.to/obox/1AXAA00016
• Socket Extensions 1aau.to/obcA/1AXAA00015
• Torque Wrench 1aau.to/oast/1AXAA00044
• Pick 1aau.to/oHu/1AXAA00037
• Sledge Hammer 1aau.to/oN9/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.