How to Replace Idler Arm 1999-2007 Chevy Silverado
Автокөліктер мен көлік құралдары
Buy Now!
New Idler Arm from 1AAuto.com 1aau.to/id/1ASI...
If your steering is feeling clunky, but you checked your tie rods and other outer components, consider the idler arm! This part that connects the steering shaft to the steering linkages can wear out and get loose or clunky too! This video shows you how to install a new idler arm on your 1999-2007 Chevy Silverado.
• Check here for more videos on the 1999-2007 Chevy Silverado: • Chevy Silverado 1999-2...
This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• 21mm wrench
• 15mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Block of Wood
• Center Punch 1aau.to/oa/1AXA...
• Floor Jack 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Jack Stands 1aau.to/oa/1AXA...
• Vise
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Chevy Silverado 1999-2007 1st Gen: • Chevy Silverado 1999-2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 58
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
Biggest piece of advice I have for anybody doing this is do the idler arm with the bracket together, remove them together as one piece and install them outside of the truck together then install together. Do it like that and the whole job should take you less than an hour, it's not worth splitting the idler arm from the bracket to save $40
I love this channel. I basically learned how to rebuild my truck watching these videos. Thanks a lot guys!
Thank you, my son and I just replaced his idler arm today. Now we are on to the pitman arm.
@looseparashoot
3 жыл бұрын
How was the Pittman? I'm tackling it right now
Thanks for taking the time to make these videos Nice to see the job before ripping into it
Great video. Just ordered one for my Denali. The steering felt like an 80’s Chevy and after jacking up the truck to check for play I realized my idler arm had a massive amount of play. Like the drag link could move 1/4-1/2” when moving the wheel side to side. Looks pretty easy from the video. I hope I can get the idler arm to seperate from the drag link that easy.
I like how you show real life examples like the bolts being rusted out
@TRQ
3 жыл бұрын
+Miguel Garcia jr Thanks for the feedback! 1aau.to/m/Shop-TRQ
Thank you! John 3:16 For God so loved the world that He gave his only begotten Son that whosoever believeth in Him shall not perish but have everlasting life.
How did you pop that bolt out so easily?!? After you put the pieces of wood between it took you one hit and it popped out. I can't seem to get mine to move
I was looking for the torque specs for attaching the idler arm to the idler arm pivot bracket but watching this I felt simultaneously grateful and silly. LOL I immediately realized that with the need for the Allen head driver, there is no way you could get a torque wrench on the nut! Duh!! 🙂 Thanks for another great video!
Looks easy. Thanks for including torque specs
watched this twice and getting ready to tackle the job... somehow I'm thinking it's gonna take me more than 6 minutes...lol
@copelingilliand6885
2 жыл бұрын
What else did you end up breaking
@patrickbaca2255
2 жыл бұрын
@@copelingilliand6885 🤣🤣
You have explained and made the process of my job much easier, Thank you!
I'm not sure what I'm seeing, but at 0:35 when you're taking off a 21mm nut, it looks like your impact is spinning clockwise?? Is that a reverse thread?
Good job excellent God bless thanks bro learning olot from this videos
great video and well explained
great video thanks for the video why would you have to align it though if you put it back exactly the same?
Are pitman arms only on 4WD trucks? I can't seem to find mine unless I'm just blind
Out ****ing standing !!!!!!!! Saved to my favorites !!!!
@TRQ
3 жыл бұрын
+KP media Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thanks!
What are torque specs of it all, u should add that into your videos. Thank you for being straight to point
Great job 👏🏼 man, thanks for making this video
@TRQ
Жыл бұрын
+Steven Twiddy Thanks for watching our video! 1aau.to/m/Shop-TRQ
Hi TRQ, does it have a zirk fitting? If so what size because mine has a hole but can not find the proper zirk fitting to grease it..
Great video, very imformative
U made it look easy
So the idler arm is on the pass side and the pitman on the drivers right
@greggarside9830
2 жыл бұрын
Correct
@SrtJasper772
Жыл бұрын
Ohhhh…. We’ll I definitely order 2 sets of the idler arm and pitman arm…
@SrtJasper772
Жыл бұрын
I thought there was 2 of each🤦🏽♂️
Came here to find the torque spec for the idler arm nut. Everything else has a torque spec but the idler arms torque spec is nice and tight lol nice.
Can I do this job and also the pitman arm while the truck is on the ground?
only supposed to bend one side of the pin.
How long should this take for a shop to do along with a pitman arm ?
@TRQ
3 жыл бұрын
+sadie63 The installation should take a little less than a hour.
@tfghffff456
Жыл бұрын
@@TRQ lol the be like 5 hours for 1350 . Can I get bolts on n off by hand
Do you have to add grease to the idler arm?
Does this repair require the tires to be off the ground?
What’s the reason for those parts to be replaced or what was the issue?
Is there an official torque spec for the idler arm to the bracket?
Anyone know if a 2wd 04 Tahoe has 3 or 4 groove?
Anybody have one of these videos for a 2018 3500
Did the truck kinda bounce and shake the front end over bumps before replacing the idler arm?
@tonyfischer5214
3 жыл бұрын
Mine did. Especially going downhill when I hit the brakes. Most people think warped rotors first when that happens but alot of times it is a bad idler arm.
@marcusfenske2284
3 жыл бұрын
bouncing is shock absorbers. idle arm is more throwing the truck side to side with the sway of the road
@glennwilck5459
3 жыл бұрын
Oh yes! I wondered why now I know!
WOW. Took no time at all to remove!
Nice job!
03 silverado z71 what spline count is mine?
@96cr
3 жыл бұрын
Usually a 3 or 4 spline
Are these guys out of Europe?
@TRQ
Ай бұрын
+@rogerlittlegeorgeii8516 Our video studio is based out of Massachusetts.
Biggest waste of money ever is these brand parts