This is just what I was looking for, and you explained it so well it worked first time! Thank you so much. I could not have done it without you, literally, and I appreciate the time and trouble you have taken to make the video.

Your video saved me a lot of money. I had already replaced the fob before watching your video. And when i tried starting my car it wasnt. After watching your video realised that the small black plastic item was also part of the antenna. Reopened, put in back the plastic item and magic; the car started. This video saved me with car towing to the service center. Thank you.

I think this is a great video, well explained, only detail is that the small piece you called an antenna is actually a transponder and way more important than the electronic board itself... why? The electronic board job is to lock/unlock doors and to arm/disarm alarm if equipped, the transponder is what “talks” to the immobilizer system to ensure that the right key is inserted into the ignition, without that piece the car wont start even if the metal key blade is cut correctly... the doors can normally be unlocked using the key blade too so it “overrides” the use of the remote, but the transponder cannot be bypassed.. just sharing. Thanks!

@TechvirusIndia

3 жыл бұрын

Thanks for the detailed info 👍

@stevenbowen23

2 жыл бұрын

I'm having this problem atm. I've changed everything and the doors can be opened from the remote and battery but I can not get the engine to start.

@charliechimney4385

Жыл бұрын

We’ve just found this out when we can he’s ours over, the car wouldn’t start! 😡🤦🏻‍♂️

@marcmcleanphoto

Жыл бұрын

Interesting, any idea how the transponder powered seen as it does not seem to be connected to the main board?

@sajidhoosen8665

8 ай бұрын

This is a super useful comment.. My key broke and I couldn't start it using the metal cut out.. Now it makes sense..

Thought I was tech savvy, so decided to do this without guidance, but car was rendered useless. So next day found this video, followed the instructions and hey presto it worked. Thanks.

This video helped me save a lot of time and money. I have new key fob casings and I'm so happy. Thanks.

Thank you very much for this instructional video! It is very clear and concise and shows exactly how to do the project. We were having trouble with the spring and did not know the blade had to be rotated twice. These things never come with instructions :)

@TechvirusIndia

5 жыл бұрын

Welcome.

Thanks for the nice instructional video. Was able to replace the old key in 15 mins.

Great video dude. And fantastic explanation. I have watched a couple of these but you are the first to mention the antenna

Best key turorial for Hyundai on the internet . Thank you very much

My fob was glued together, and very difficult to open. Also, the antenna was glued in quite firmly, and I had to cut away most of the case around the antenna before eventually prying it loose. All good in the end however, so I'm grateful for the video.

Thank you!! The only video that showed where the antenna was. Couldn't work out why my car wouldn't start til watching this video 😅

Brilliant video! Made an otherwise difficult job easy. Thanks a lot.

Very Helpful ... clearly communicated with step by step procedure 👍🏻

@TechvirusIndia

7 жыл бұрын

Thanks .. Nitesh.

Brilliant, many thanks for help. Could not have done it otherwise!

Thanks so much mate. Very helpful

At last, a decent tutorial on this procedure. Thank you.

To the point explanations and it work..

Thank you, this tutorial is perfect. Worked for me!

That was a neat key fob replacing video. Thanks, Could you please provide the Amazon link to purchase the key fob?

very well explained. Thank you very much. Bless you.

Very clear and concise. Good job.

@TechvirusIndia

7 жыл бұрын

Thanks

Thanks bro this video is very helpful for me spring rotated right work without spring rotated opposite work.

Wonderful! Thanks made my key rebuild so easy 🙂

Nice and easy step one can easily make change in key thanks for sharing keep good work ..

@TechvirusIndia

7 жыл бұрын

Amit Kumar Welcome Bro :)

Nice video! Thanks pretty clear and straightforward 👏

@TechvirusIndia

3 жыл бұрын

You're welcome!

Very easily explained ❤ thank you bro

Magic, sorted, thank you

Thank you it made my day ❤️❤️❤️❤️ Ty it helped me a lot. Best video ever

My c2010 key fob (same design) was glued together and very difficult to open - had to use a small flat head screw driver to separate the case all the way around the fob before it would open.

Thanks! This was extremely helpful.

Well, how do you get the lever out.Thats the part I cant figure out. I have an old lever I need to put in.

Obrigado pelas dicas, principalmente mostrando onde tava localizado o chip do controle.

Thanks a lot dear. U saved my day

Very helpful. Thanks

Thank you this was helpful😄

Really this was so helpfull. Thanks a lot

Very clear and helpful

Thanks a lot... Was very helpful

@TechvirusIndia

5 жыл бұрын

Welcome

Thanks you very helpful

You just saved me a lot of money. After replacing the case I did not use the component , now I used it and it works perfectly well. Thanks bro love from Germany 👍🏾

Thanks i was able to fixed mine.

Thanks for your help

Thank you v much.

very helpful.tq u so much

@TechvirusIndia

6 жыл бұрын

vijay kanth Welcome

Life saver!!

What happens if Ive lost my original spring and level? The one that came with my new key doesn't fit in my key, it doesn't come out far enough.

Very clean and clear instructions. Many thanks! I have competed all steps for the old key, but the antenna is stuck. I think it's glued there inside. There is no enough grip to remove it. I tried to break open the lower side of the plastic. Please suggest me a way to loosen the glue. Thanks a lot once again.

@pragneshtrivedi7126

6 жыл бұрын

Amol Kokane I also have the same issue. It is risky to remove the sensor as it might spoil it.

@bacevs

5 жыл бұрын

I used a xacto knife to pry it out

Thanks, many many thanks

Thank you sir

Thanks 👍 bro

Beautiful video.

Merciiiiiii ❤

Very nice sir

have i20 magna I have no feature on my key I want key feature like yours it is possible

Thanks!

Additionally... soem cases have small screw behind logo. I had small screw under Hyundai logo

@francinefleur

3 жыл бұрын

Yes I also had the tiny srew for the back of the key but I didn't get the logo to cover it 😕

thank u

This saved me. I thought the white clip was the chip antenna. I did not see the chip underneath

@bacevs

5 жыл бұрын

Same here. I was scratching my head as to why the car wouldn't turn on.

Thanks👍

thank you

I did not put the antenna. But the remote still works. Is it okay ??

Thank you

The small black plastic piece is not an antenna..... It's a transponder chip. Without it, your car won't start at all.

Thnx buddy

you must of been lucky with your fob, 20 minutes and stabbed myself 3 times with the screw driver I still haven't got the thing apart!

Incredible

@TechvirusIndia

7 жыл бұрын

Nitesh Ranjan Thanks.... :)

I lost the antenna any idea if I can get it anywhere

Amazing

Did anyone with a Kia Soul had trouble ditching the second part of the key mine seems like it’s sealed all the way

I need the circuit how can I get it please kindly share me the link

thanks

Thanks

😂 Very well explained.

hello thanku🙏i have i20sports and it'll be really good of you if you listen( my key has been damaged and so if i buy that case online And if my chip doesn't work cuz it looks like it won't can i buy it and do we call this chip sensor? or that rubry antena is the sensor pls explain cuz the sensor is the main part i guess.. thank you 🙏

@TechvirusIndia

5 жыл бұрын

You don't get chips or antina outside, you need to buy whole new key in that case. You can 1st try with replacing the case and of ot dosen't work get new key.

@karfk.c..2352

5 жыл бұрын

@@TechvirusIndia but is the chip the main thing which is necessary to start a car or the thing u called antina? "aka Sensor"

Thank you.

👍👍👍

👍

how do you open an original case when everything is sealed and can't be opened.

Mine is 2009 model similar flip key. Recently I opened & found that the transmitter is missing. How do i replace the transmitter? I think it was probably misplaced about 6 months ago, when i gave for servicing, since then i was facing difficulty to make the remote work. When i asked the workshop they said battery needs to be replaced. Now i dont know what to do? The works manager said pls replace the outer shell which will cost 1600/- & redirected me to some automotive keysmith. I felt it was exaggerated figure for outershell & I wanted to buy online & after seeing this vdo opened and am shocked to see the transmitter missing. How do I replace the transmitter? Is it even possible? No wonder the remote key wasnt working & its my mistake for sitting over it believing battery replacement would've solved.

🔥🔥🔥🔥🔥🔥

Very helpful, thank you.

I have watch so many of these key case replacement videos and I have yet to see anyone of them follow static prevention procedures. Anyone who work within the electronics field know that modern day electronics understand that static electricity is your biggest enemy which can cause serious damage to most electronic components. Simply touching circuit boards without taking precautions can and often will, badly damage the ICs. i.e. remote car keys....

I had to my cut case open, didn't come apart as easy as yours.

Please help me,I lost the antenna of key

Every thing will be done but Remot control can't work plz tale me what i do

I had same car model (i20 sportz new model)

Thanks because i can break my dad car key🤣🤣😥😥😥😥

Not working

Key Maker Jagdev Rampura 98783.04472

Same key with kia rio, all u need to do is just replace n put a new rubber. It doesnt need to do unnecessary disassemble those case bruh

FAKE VIDEO! dont waste your time!

Thanks sir

have i20 magna I have no feature on my key I want key feature like yours it is possible

have i20 magna I have no feature on my key I want key feature like yours it is possible

have i20 magna I have no feature on my key I want key feature like yours it is possible

@TechvirusIndia

6 жыл бұрын

TABISH KHAN No feature means ? Does your key has 3 buttons ?

@tabishkhan2885

6 жыл бұрын

no button on my key

@tabishkhan2885

6 жыл бұрын

no button on my key

@TechvirusIndia

6 жыл бұрын

TABISH KHAN Then you can't add it , you need to change entire system of car to key chips.

@tabishkhan2885

6 жыл бұрын

can your provide any video for me to install keyless uplock or. lock video