Excellent video Charles! Some months ago I disassembled and opened my headlights, also a Passat B5.5, using the oven method. I didn't knew I could remove the wiring harness. Anyway, it doesn't fried anything because low temp should be used to soften the OEM seal. I found out half of the inner wiring cracked (plastic wrap) and was ready to short anyday. Fixed with the shrinking tubing. Extensive cleaning and the main reason for opening was that the plastic rods for adjustment were broken, so I couldn't aim my headlights at all! Used some JB Weld along with some wiring around critical points and waited for a day and a half for the thing to cure. I didn't got the butyl seal to close the headlamps and used instead the black stuff from Permatex. Here I learned something: It bonds well for closing but you need to let it breathe at least 48 hours to let it bleed so the chemicals in the sealer go off, otherwise those vapours end clouding the inside of the assembly. Now I see you got a new wiring harness, better option than wrestling around opening all that piece. Thanks for the video and the spot on advise.

This sets the standard for high-quality YouTubing. Amazing photography and no-bullshit commentary - this is how it's really done.

@HumbleMechanic

7 жыл бұрын

+Labrador McGraw thank you. I'm trying to work on the commentary. Hahha. I am always talking during the job. But if it's not a ton of value I cut it.

@labradormcgraw2409

7 жыл бұрын

HumbleMechanic I don't think the commentary needs any work; it seems you've got the balance just right.

Awesome video....as an electrician a little tip. Tie the fishing line to the old turn signal wires BEFORE you yank them out. It will save you from having to fish them back through after the fact. ;) Going to be doing this repair to my B5.5 in a couple days.

Awesome presentation. Thanks

There was this passat behind me today with headlights twitching like a Christmas tree, now I know why lmao, great DIY video !

Great DIY repair video as always. I'm HOPEFULLY going to use this series of diagnosing turn signal troubles and my mechanically-inclined mind to diagnose and repair my 2004 Honda Civic Si Hatchback that has lighting and other electrical issues after being a theft recovery...headlights were originally 9005/9006 setup. The wiring harness was cut for both sides. When the car was repaired the missing 9005/9006 bulb sockets were replaced with a socket for a 3-prong 9003 single bulb oem harness socket. I ordered new replacement headlight assemblies since one of the headlight lenses had been severely damaged by a large stone on the highway. My question is: When I ordered the new headlight assemblies, I ordered for a 2004-2005 model not knowing what I was getting into. The new assemblies came with adapter harnesses to adapt the 2002-2003 single 3-prong 9003 socket to the 2004-2005 9005/9006/H1 dual bulb headlight assembly connectors. I thought it was going to be an easy switch. BOY WAS I EVER WRONG!! With the new assemblies installed and using the provided wiring adapters, only the passenger high beam works and only driver's low beam works. I still have not been able to get the front turn signals to work in any capacity, trying almost every adapter and wiring configuration I can possibly imagine. If I rewire the headlight connectors back to their original configuration from 3-prong to 9005/9006/H1 oem 2004-2005 sockets, will I need to run new, separate grounds for each of the new sockets...pass. high beam, pass. low beam, driver high beam and driver low beam...in order for them to work properly? As I said I'm elbows deep in troubleshooting the turn signals. All the lighting relays and fuses have been checked and independently double checked. No bad fuses nor bad relays. Rear and fender-mounted signals work, just not the front ones mounted in the headlight assemblies. And my air bag light is on on my dash, the cruise activation button no longer lights up and cruise does not operate at all, difficult to keep windshield wipers in high speed operation position at the column multifunction switch and the horn was apparently rewired to a momentary push switch mounted in the dashboard next to the steering wheel. I think all these issues are somewhat related. All functions go through the multifunction switch/clock spring assembly. Other than the fuse box and the battery, it's the only connection that they all share, to my knowledge. Please if ANYONE has any genuine ideas, I would be glad to hear them. I absolutely love this car, even with these issues. I could buy a completely new engine bay harness...headlights, turn signals, marker lights, horns, foglight wiring access sockets, etc.- no engine/trans harness...directly from Honda but with shipping and insurance it would cost more than $500. Being disabled since 2014, with 4 of the most selfless kids and an amazing, supportive, beautiful, smart wife who works very few hours and attends college full-time... Let's just say a $500 wiring harness is the least of my priorities on my "to-do" list. Choosing to buy groceries, pay rent, utilities, make doctor appointments, have gas money for my wife to get to school and work...spending $500 on a wiring harness for my car isn't even an option. That's why I'm having to fix this myself. No garage or shade tree will even touch it. PLEASE HELP!!

Great work! I really like the way other manufacturers its simply pull the connectors from the bulbs, and remove the loom connector. Whole thing takes 20-30 minutes being careful. VW makes a great car, this just seems more complicated than it needs to be.

@HumbleMechanic

7 жыл бұрын

VERY much more complicated than it needs to be

@pegucornlove7238

Жыл бұрын

I can’t find this connector for a vw beetle turbo 2012 and their gonna total my car if I can’t find it if you know anything lmk

Brilliant little video 🇬🇧

@HumbleMechanic

7 жыл бұрын

Thank you

oh geez HM,watching you remove the wiring reminded me of a surgical procedure..perhaps we can call you doctor HM...excellent vid Charles. cheers

@HumbleMechanic

7 жыл бұрын

Thanks so much

great video again

@HumbleMechanic

7 жыл бұрын

Thank you :)

Nice job, covered all bases.

@HumbleMechanic

7 жыл бұрын

+J. Hunto's Garage thank you sir.

At 4:30 and I'm loving my Grand Am even more. Toolless headlight removal and the wiring is all external to the headlight assembly.

@Cbeast

5 ай бұрын

I have a grand am as well. Fun car

I don't need to know how to do this as I don't have a passat anymore but your voice is soothing so why not XD XD.

@HumbleMechanic

7 жыл бұрын

:) Thanks you

It's great to be back in a VW. Driving a BMW for so long was strange. LOL ;)

@mentaldan666

7 жыл бұрын

HumbleMechanic 😂😂😂

@HumbleMechanic

7 жыл бұрын

:D

@morxmeister11

7 жыл бұрын

have to drive my skoda, because some asshats stole my ronal turbos from my mk1 leaving it on woodblocks -.-

@tony4metallicaify

7 жыл бұрын

HumbleMechanic man I tell ya what all of us vdub guys have all did this at least once or twice also them mk4 1.8t coil pack wiring was bad for doing this too

@HumbleMechanic

7 жыл бұрын

+Tony Mullins truths

Great video! Very useful indeed. Thank you. How about one with vw jetta mk5?

Thanks bro...I learn something new....I am electrician..so...let DIM...do it myself....save a lot of time and money...

I'd like to comment on the fact that vw sells the harness by itself vs forcing the customer to by the headlight assembly. Most makes wouldn't do that. Very cool of vw

@mikea.2348

7 жыл бұрын

They don't sell these for Mk5 Jetta/GTI as far as I know.. and that headlight is serious money

@AlphaFlight

7 жыл бұрын

Brandon Foss yea. but look what you have to go through. more like a deturent

@brandonfoss9445

7 жыл бұрын

Adrian Nava enter at your own risk lol

@ShainAndrews

7 жыл бұрын

When you choose to overlook the obvious design flaw to praise the implied "reduced cost" for the repair.

great video! one comment, instead of the hassle of fishing the blinker wires through, cut them 5 inches from the socket and sliced them back together, you do it anyway for your xenons

I have the same insulation issue as in your video, called audi (a3 8p), internal headlight harness is not avaliable independently. is there a vw headlight that shares the same internal wiring and connectors that is available?

Hey Charles great video what's the part # for that harness?

Awesome video .. I need the harness for a 2010 facelift A3 . Mine has the Xeon projector headlight . My harness is completely shorted out . Is there a part number for this harness ?

Would you by any chance have a way to wire from an 2015 Acura TLX led headlight to the newer 2018 Acura TLX led headlight .

27 dec 2019 2:30 am est:thanks, i wonder whether car-head-light-cable connect to battery or alternator ?

Hello, are all the turn signals (front, rear,and mirror) on same fuse (06 vw jetta), or is the mirror one separate?..no voltage to pass. Side turn signal( on mirror) ..all other turn signals work..where do i start (to find the problem) thank-you

Hey Charles HumbleMechanic! Great Video! I have a B6 Passat and the Headlight Won't Turn OFF. Even when the whole car is shut off and all the doors locked. Its only the drivers side one. I heared it could just be the battery just needs replacing - could that be it? Ever run into this issue?

Fellows, any suggestions as where I can get a replacement wiring already mounted for the Passat B5 97-00 ?? Tons of ads on eBay but all of them only apply for the B5.5 :(

Great job Charles!! You should do one of these for the MKIV Golfs.

I have a 06 mk5 and i put a 08 mk5 engine in it can the wiring harness of the 08 cause issues with the older things?

good video mate . you coud have used the old brown and green to pull the fishing line thou

Where can I find the parts? I'm looking for a wiring harness for a 2001 Audi Allroad. The headlights in the vehicle now blow the fuse for the low beams, according to my wiring diagram they are wired incorrectly, likely from someone installing lights from a similar vehicle that has different connections. Now I need to rewire it and the harness inside is crumbling a bit. Would rather replace than make something from scratch

Just found this video. Looking for internal harness for Mercedes-Benz Hella bi-xenon headlight. Any idea where I can order one?

well done! I have same problem my is VW Jetta S 2014 2.0L I couldn't find whole harness replacement kit my DRL wire burn I try to recreate twist together and didn't work. I think the housing itself need replacement where can I order harness whole kit?

Hey idk if you still reply to comments on here but I need an answer kinda quick. My headlight connectors went out on both sides and I wanted to know if I buy new ones if they’re the same on both right and left side

do you know if they make a B6 Audi A4 harness like this, I know they are similar but i can't seem to find it by itself

Stumbled across this looking for a simple removal to replace and surprised they added this route. Is it worth it to wrap with a sacrificial tape layer to prolong the life of the wiring insulation or will it make any difference with the 18ga wiring (halogen, not led)?

Any chance these are available for the Cayenne 955?

I have a question ... I had a blowout in my 94 prelude. The damages were my fender was messed up, my bumper ripped off, and main problem is the my wiring harness for the right side of my head light s were ripped out. From the inside of my car . Can seem to find the harness anywhere or what it's called lol can you help me please?

Were i can get a replacement harness like this for a 08 VW Touareg with factory HID lights?

CAN you please do a video on a Golf MKV xenon light harness wire issues because range motor won’t work and VCDS is saying Headlight Range Adjusting Motor (V48) 010 - Open or Short to Plus and I don’t want to replace the headlights

Will this headlight harness work for Audi A6 also same years?

Hi. Where can I get internal wires for a Bixenon headlight unit from a Jetta Gli MK5?

decades later another mechanic finds the repair and says, "Check this out, back in the day they spent countless hours replacing the crappy wires so they could drive in the dark..hahaha...ha...ha" with cartoon mouth moving out of sync. I gotta do this soon to my own x4 so I laugh at myself. great vid. thanks for the heads up.

Geez. I had this happen with my E55 headlights, I use repaired with liquid tape and cutting out some sections. I did not see a part available for the internal wiring like VW offers. This crumbling wiring is insane and quite annoying.

Working on this right now on an 07 Passat wolfsburg edition. Can't seem to get the pins out of the connectors, and can't find a part number to look up to get a replacement harness. Getting frustrated :/ do you happen to have the part number for this harness, or have a link to the tool needed to remove the wires from the connector? I can repair the harness with heat shrink tube but im trying to avoid cutting and splicing the wires. The heat shrink tube will slide over the end of the pins in the main connector, but not the end that connects to the bulbs unfortunately.

Hi Charles, With the headlight harness issue what is the cause? Was it to high of current draw , cheap factory wiring sheathing or heat from the headlights?. Was this a common problem and is the replacement harness upgraded oem or aftermarket. Another great video mate. Cheers Mark.

@HumbleMechanic

7 жыл бұрын

Hi temps inside the housing, and poor shielding of the tires I assume. :)

@n9wox

Жыл бұрын

@@HumbleMechanic shielding of the "wires" ?

I was wondering why are the pins on a lot of connectors so small? I was meaning like the window switches on the master control. The only was I see the repair would be replacement of the harness. Could you do a video on one of these and how to test these? I was never sure how to test or depin these.

@HumbleMechanic

7 жыл бұрын

+Brian Skinner I think I've done depinning video before. The pin size is based on the wiring connector and the wire size. Smaller connections usually have smaller pins. Also smaller wires use smaller pins

I can’t figure out how to remove the power cable that is holding the assembly inside still. Is it a pull lever or push?

Holy hell this looks like the wiring on my Peterbilt 379 😂 nightmare replacing

Ahh that period when VW decided to use the crumbliest flakiest pastry for their wiring insulation.

@HumbleMechanic

7 жыл бұрын

Yep. I have fixed a lot of headlight bulb connections like this. But mine is far and away the worst

@nodriveknowitall702

7 жыл бұрын

I was wondering what the deal is here. What garbage

@nodriveknowitall702

7 жыл бұрын

Hopefully the replacement had different insulation.

@dannytheman2217

6 жыл бұрын

i thought it maybe had to do something with maybe the condition of where you live, something like extreme heat and cold like down here in texas, it ruins everything

Hello, HumbleMechanic I've looked everywhere and cannot find the "how to" I was hoping you could help me with a task that is driving me nuts, and I really need help with. I have an old civic the turn signal and headlights switch broke and as expected with a 37 year old car I cannot find a replacement. I need to wire the headlights to a three position switch (high, Low, off) as well as the city lights and turn signal. can you help me with instructions, or show me where to find it? I really appreciate any help you can offer. Thank you - Semper Fi

On my B5, I stripped off the old, cracking insulation and replaced using 1.5mm shrink tubing.

What is the the white clip wire connector in the head light.. 2006 passat headlight!

I have the same problem with my Audi's A6 C6 xenon headlights. Can you direct me to some site where can i buy those wires?

Hi there, please where do I find the headlight main plug?

is possible change light bulb socket h1 to any other?

where can i get the replacement harness?

Just bought a 2007 VW Jetta 2.5L 6 speed 4 door. They didn’t give me much information on it. The passenger side low and high beams are not working. When I popped the trunk there were two other headlight assemblies in the trunk with harness and plug still attached. Do you think it’s worth me trying to install the passenger side one from the trunk by splicing in the new harness to see if this solves my problem? I also find it strange that other lights on my passenger side don’t work , like the front right signal and marker and also the mirror signal on the passenger side. I’m lost with this, I’ve never seen this many lights go out on one side... Any ideas???? Any and all help would be greatly appreciated.

Hi, i have an Audi A4 B6 with the same problem, and my wires harness its like yours can you tell me were i can buy it please?

It would be interesting to see the wiring replaced while keeping the old connectors (depinning, rewiring with new wire, etc), sort of like a custom harness. The wiring harnesses are quite a bit expensive for some of the pockets out there, so would be great to see ways to save money and fix what VW decided to cheap out on (wiring insulation that is).

@HumbleMechanic

7 жыл бұрын

+Gatis Girdenis I've been thinking about picking one up from the salvage yard and doing exactly that.

@GatisGirdenis

7 жыл бұрын

HumbleMechanic that's great, can't wait to see. I'm in the middle of swapping a VR6 in my MK4, and I have a cut up harness as well as I want to do a wire tuck, which is a pain in the butt for the MK4. Also, what else could I use for depinning the connectors other than that expensive tool? I just need something for one time use as I dont plan to touch the harness any time soon after I'm done with it

I'm having wiring problem with my 98 vw beetle does this apply to my problem?

Is it possible to order replacement wiring for Audi?

Great video as always. I came across this one in search of a possible fix for the headlights in my 06 Audi S4. Are these harnesses available for other VAG?? And where do you buy them?? I'd even consider an aftermarket solution to the fragile, overheated, mostly missing mess of insulation in my headlights. 🤨☺

@HumbleMechanic

9 ай бұрын

I’d always check with the dealer to see if that’s the fastest way to get and answer

@frankalarcon635

9 ай бұрын

Thanks Charles, but somehow, I don't like my chances of that. It might need to be aftermarket repair loom. Perhaps a retrofit from one of all the looms I see online for all the LED or Bi-Xenon retrofits

Where can i order the wire harness ?

Hello, firstly I would like to wish your country well in this hard times the whole world is facing. I was trying to connect my vw polo 2003 headlights switch when two connections came into contact and the car blackedout and showed the EPC light and handbrake is blinking now the car won't start and there's a funny noise from the bonnet and its a small buzzing sound. The starter won't turn at all

would this be the same format as the back lights and th small side ones ? Trying to find/replace the parking lot and small light on the sides wires. 😀

@HumbleMechanic

5 жыл бұрын

The rear bulb array comes completely out

How did you determine problem was 'Headlight Assembly' ???

I like it

Dear Humble mechanic. I replaced one side of the headlight wiring system and the low beam light still not working, also the fuse keep burning. What's wrong. Please advise. Thanks, Allen

tie the fishing line to the original indicator spade type connector and pull the line through at the same time as removing the old cable. do this with both indicator wires. Saves you the difficulty of trying to feed the line through by itself.

Good job man!I wanna do exact same with my 2006 Audi A4 with original factory HID headlights, plus I have to change or convert my original 14 pin socket to 10pin, do you think is it a big deal?

@HumbleMechanic

6 жыл бұрын

+Farzad Danesh changing the sockets will be kind of a pain. But as long as you have both connector ends and the wiring diagram you’re fine.

I know that you probably covered the headlight harness issue years back, but still I want to humbly ask you, since upon checking with the dealer, the price of one is almost as replacing the whole headlight. I am retired and I cannot afford it in my fixed income with today's food pricing Is there anyway you could show the pinout of a 2008-2010 touareg( 6 pins in the connector only) headlight wiring as to what position wire from the connector goes to which light bulb. I would like to do the repair with soldering and new wiring from the connector to every light bulb. Thank you in advance...

Hey Charles! where did you get the wiring for the headlight?

@HumbleMechanic

5 жыл бұрын

For this one, it’s available from the dealer.

@Alexsjusa

5 жыл бұрын

Can you get from FCP Euro too? Doesn’t look like a regular lay person can replace the front light harness. Dealership claims my harness is shot and wanted to charge me $350 for a kit🤷🏽‍♀️, said replacing the bulb wouldn’t work. I’ll try replacing the bulb first though, they are pretty dishonest so I can never trust them!

This seems like a recall needing to happen. The potential for a electrical fire seems high. Is this that common on these cars?

@HumbleMechanic

7 жыл бұрын

Nah, I doubt it will ever be a recall. The odds of actual fire are pretty low. Each section is fused. This is somewhat common. I have fixed a lot of bad wiring to the headlight bulb. This is the worst I have seen

I'm having trouble finding a wiring harness for the headlights on my 02 Cabrio. Any suggestions?

@HumbleMechanic

Жыл бұрын

That is likely obsolete. If your are lookin for the whole harness for the front lightla, I’d buy a junkyard one and rehab it

@ronaldlewis8452

Жыл бұрын

@@HumbleMechanic thanks man I might try to figure out where the connection is broken and try to fix this one. WOW the wires in these are so brittle, I've taped them up some.

I have a 2006 Jetta with both sides not working. I cannot find this wire harness anywhere. If I redo this myself, what would you recommend for wires?

@nicotronics

5 жыл бұрын

Use SIlicone Wires. they are used for high heat environments.

Hello there, if anyone can help me telling me where can i get the wiring? i got an a3 8p

What would be the average cost to get the new wiring harness installed? Wanted to do it myself but rather not take any risks

@HumbleMechanic

6 жыл бұрын

Probably 3 or so hours?

@johnkingara7971

4 жыл бұрын

vw touareg the labor is 2 hours at $125.00 you are looking at $250.00 and extra for parts, each harness is $86.00

how are the pins supposed to be removed from the main connector? I wanna just pop the pins out and put heat shrink over the exposed wiring.

@HumbleMechanic

6 жыл бұрын

There is 2 locks on the connecter. The secondary is purple. and the primary, you need a release tool.

Plug on headlight ,where bulb is plugged into , is broken , can it be replaced easily??

What year is your Volkswagen. ? Did that wirring harness come assembled already?

@HumbleMechanic

4 жыл бұрын

This is a 2005 and the harness came complete

How the heck did VW/Audi make such horrible wire sheathing?

Your blinker fluid is empty bro.

@HumbleMechanic

7 жыл бұрын

+Jorge Carbajal Muñoz damn. The warning light didn't even come on. Lol

@justinmichaud3113

5 жыл бұрын

Damn it! I can't find the fluid anywhere is this like the third inline exhaust bearing computer modualizister hidden like everything else? I have been using old fluid for the above at the dismantling yards! Where is a good spot to buy the five finger blinkles flued of got yo $ mod!

I've got a 2005 beetle. I slid the headlight out just to see which type of replacement bulb to get. I noticed many of the wires were frayed with several wires exposed. I took note of that and slid the headlight back into place, but suddenly the AC doesn't work, my brake and engine lights are on constantly and the car is beeping as if there's an issue. Is it possible the wires touching eachother would cause this issue? Like a short? What's the best way to confirm/fix the issue (once I fix the wiring issue of course)?

@HumbleMechanic

6 жыл бұрын

It’s possible. Check fuses first

I can't find wiring harness for mk5 GTI xenon lights, any ideas?

@HumbleMechanic

8 ай бұрын

I’m not sure vw sells those separately. I did a quick check and nothing. You may have to fix it wire by wire

This was very helpful, I have a 2008 Audi A8L and I am need for a similar wiring harness. I would appreciate if you could share Website or Phone # where I could buy this similar harness, thanks!

I would like to attempt to replace my standard halogen headlights (with no projector) with a LED projector type on my VW. It would be nice to present a video on how to DIY. Thanks. Nice video!

@Philiopantheon82

2 жыл бұрын

Its illegal if its not originally not made for LED light!! I have fined for 50$ doing that, avoid it mate🤧😞

I´ve been looking for the headlight wiring harness for my 2006 Audi A6 C6 but I just can´t find it anywhere. I don´t want to buy the expensive headlight assembly. Where could I find it? Does anyone know?

@HumbleMechanic

6 жыл бұрын

You may have to make your own.

Can I ask how the wiring harness got so bad in the first place?? But great job 👍☺ keep up with the good work

@HumbleMechanic

6 жыл бұрын

Age, temps and poor sheathing

@grandiva035

4 жыл бұрын

My question also because it's only 2 yrs old? A 2017 Shouldn't need replacing that soon?

Do replacement headlights come with a harness?

@HumbleMechanic

2 жыл бұрын

yes in general

Is there harnesses available for a mk5 golf?

@HumbleMechanic

3 жыл бұрын

I don’t think so :(

after removal and installation of the headlights is there any issue with alignment

@HumbleMechanic

7 жыл бұрын

+joshcamp27 i didn't have any, but you sure could.

Does anyone know where I can source replacement (inside the housing) harnesses (both sides) for a 2007 A4 B7 2.0t Quattro with factory HID (with AFS/curved lights)? The only harness I can find online is the one that connects outside of the housing.

@HumbleMechanic

5 жыл бұрын

They might not be available. Maybe have to make them

@knakamura24

5 жыл бұрын

HumbleMechanic, Thank you for such a prompt response. It's sad but not surprising that Audi would rather sell the whole housing instead of just the harness. It's no secret that these cars are not cheap to maintain and fix. Just another example of brilliant German "over-engineering!"

Nicely done, but I am appalled by how bad the original wiring was!

How do u get new pin ? The one s inside the connector of a headlight? 05 sts)

@HumbleMechanic

2 жыл бұрын

Dealer may still sell them

where could I find a replacement harness other than a salvage yard? For A 2008 Touareg? Yours looked new

@HumbleMechanic

10 ай бұрын

Dealer is where I got mine

@tolipapa1

10 ай бұрын

LOL you think that I would try dealer first.. Wow, I feel kinda stupid. I looked at Amazon, E-bay, Aliexpress and ll over creation, but not at the dealer.. DUH..LOL.. I have been watching all of your videos and I wanted to thank you for all the great info you have been providing all of us...@@HumbleMechanic

@HumbleMechanic

10 ай бұрын

Hahahha sometimes the easiest thing is so easy you can’t see it.

Great job. But for the entire video I was thinking bad thoughts about the MD in VW who outsourced that rubbish wiring. This should plainly just not happen.

@HumbleMechanic

7 жыл бұрын

+Andrew Thompson lol I feel ya.

@Blueshark2020

2 жыл бұрын

⁹

Is this what needs to be done to replace the front harness for a 2011 CC?? 😓

@HumbleMechanic

5 жыл бұрын

on a CC you may have to fix the wires. I don't know if you can get the harness complete like this one

what gauge wire would i need to fix the harness myself?

@HumbleMechanic

7 жыл бұрын

I would want to be at least 12 awg

We need this for the Touareg 1 lights please!

@HumbleMechanic

4 жыл бұрын

I wonder if they have the harness for that light.

I can't find a repair harness for a Mk5 GLI - any idea if they are available separately, or am I stuck with buying new lights?

@HumbleMechanic

7 жыл бұрын

+Mike A. I'll try and work on a video for the other cars that don't have a wiring kit available

@blueblazeing94

7 жыл бұрын

If you need a MK5 light to "repair" let me know I have like 3. Ending up going after market as I could get a pair for the cost of 1 OE.

@HumbleMechanic

7 жыл бұрын

+Cody Fitzgerald if you have an OEM one let me know. I'd be interested

@pricebullies7836

7 жыл бұрын

Cody Fitzgerald where did you order the aftermarket?

@gil630

6 жыл бұрын

Cody Fitzgerald I have the same issue with the wiring, would you please tell more about the aftermarket information?