How to Replace Headlight 95-00 Chevy Tahoe
Автокөліктер мен көлік құралдары
Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ib/1ALHP00002
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 96, 97, 98, 99, Chevy Tahoe, Suburban, C1500 or K1500 trucks.
🔧 List of tools used:
• Phillips Head Screwdriver 1aau.to/oUG/1AXAA00013
• 10mm Socket 1aau.to/oFT/1AXAA00017
• 7mm Socket 1aau.to/oFT/1AXAA00017
• Ratchet 1aau.to/oVq/1AXAA00016
• Socket Extensions 1aau.to/oKS/1AXAA00015
For More Info visit us at 1aau.to/h/aCh/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 66
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
Never mind. I changed my lenses in one hour because of this video. Thank for the information. It really helped.
Way to go! I received my new headlights today and followed your EZ installation video. Of course my install does not go as easy as yours because I had to remove a brush guard from the front. LOL Once I did that all was pretty easy. I am sure I will have to adjust the headlights which you did not mention in your video. Not a big deal and I will do that in my barn against the back wall. Only flat place I have. lol Anyway I really appreciate your videos as they have helped me maintain my 99 Tahoe and 2013 Dodge Grand Caravan. Thanks 1A Auto!!
I just replaced a lamp on the driver's side of my 1999 Tahoe with this tutorial. If it's just the lamp on the top, you can reach it from under the hood -- a bit of a struggle but doable for those of us who are not lucky enough to own a socket wrench set. I will be bookmarking this, as now I see it's so easy to see them all I can do them all myself over the next couple of weeks. I'm sure anyone at an autoparts store could have done the same thing but I like knowing how to do things myself. THANK YOU!
@1AAuto
9 жыл бұрын
Thanks for watching. Have a great day! 1aauto.com 866-403-3393
Thanks it worked didnt realize it was a major operation to replace a head lamp
Thanks for this! Needed to replace the bulbs in my 97 GMC Suburban. The threads were stripped on two of the four 5mm rods that secure the headlamps, for the easier method of replacement. Glad I found this video as an alternate method.
@1AAuto
7 жыл бұрын
Congratulations on the successful repair. We're glad the video helped you out. 1aauto.com?KZread&CTA%20Comment&ATony 866-403-3393
Thank you for the great tutorial. Changed both headlight assemblies in less than thirty minutes.
Thank you for this!! Of course the headlight pins on my 97 Suburban (my winter beater) just spun and wouldn't come out. I followed your video and got all the bulbs replaced! Now I feel like a bad ass chick.
@1AAuto
5 жыл бұрын
+Trizzy123 haha. We're glad we could help!
@Jeff-qs6nd
Жыл бұрын
You ARE!
one other little note if your lucky and its the driver's side low beam is the one that needs replacing I found that I can remove it from under the hood and there is a tray for a second battery on the driver's side ( my 1998 Sierra) and you should be able to see the back of the low beam though a hole in the radiator support. Remove it by simply lifting the wire harness tab and pushing down disconnecting the wire from the bulb as he shows you in this video - - this will allow you to turn the bulb counter clockwise and remove it
@WilloriaLeigh
5 жыл бұрын
Thank you, I was staring at this wondering if I really needed to go through all this just to replace a bulb. lol
@WilloriaLeigh
5 жыл бұрын
Replying to self for other readers.... this worked on my 1999 GMC Suburban as well.
I wish I'd seen this video BEFORE I started to replace the headlight & parking light assemblies on my '97 GMC Sierra. Would have saved me a couple of hours at least!
My grille tabs have long since broken, so once the screws are removed, the whole grille and headlamp assembly comes loose. Great video on the headlamp housings! Thanks!
thnx for video very helpful , but what about alignment??
Great video! Straight to the point, well explained and great filming. Thanks for the help!
wow, what a great video, and instructor you on top of my list for parts and instruction. glad i found you, saved me quite a bit. thanks
Very easy to do IF you can get that center tab on the plastic grill to release quickly. I had to fashion something - a 14" pick in a large vise-grips, to reach and depress the tab. While I had the grill off, I examined it and found numerous stress cracks. I sanded lightly and applied some JB Plastic Weld along the crack lines. That will at least slow further progression. The plastic tabs on these old beasts are brittle - take it easy and take your time.
you do not need to remove the grill and entire assembly just to change the headlight bulbs they are accessible from behind the lamps under the hood
@andybub45
5 жыл бұрын
For the low beams
This was super helpful, I saved about $190 from not having the dealer install new lights. Also that survey is super simple way to make things easy! lol
I love our 2000 Chevy TAHOE LS
Excellent video, Thank you, it really helped me out
thank you for this video. I am sure it saved me hours of time. Thanks so much
@1AAuto
7 жыл бұрын
Thanks for checking us out. If any of our viewers needs to perform this repair we carry the headlight kit shown in this video on our website. Here is a link to them goo.gl/Sx3in2
Very helpful. Thank you.
@1AAuto
8 жыл бұрын
+Gamer Sans11229 No problem. Thank you for watching. 1aauto.com 866-403-3393
involved, but simple. Thank You.
Very well done !!
What about adjusting them after, what screws do it turn to adjust them.
@1AAuto
7 жыл бұрын
+Jaime G. The adjusters should be on the back of the headlight. If you turn the lights on and aim them at a wall while you turn the adjusting screw, you should be able to see the light beam on the wall move. If any of our viewers need to replace their headlights we carry the replacement set shown in this video on our website. Here's a link to them www.1aauto.com/1A/HeadLights/Chevy/Tahoe/1ALHP00002?KZread&CTA%20Comment&ATony
Hello. I have a question for you. If your high beams are working and your low beams aren't, what is the issue?? I went and bought new bulbs and they still don't work. A lil help is needed. Thank you.
@richk320
3 жыл бұрын
Check fuse and have mechanic scan your vehicle(diagnostic)
Okay on my truck you just need to take out the two 5 mil screws sticking out the top of light assembly .Gently pull and replace bulbs or assembly .No need to take grill off or running lights .
@andybub45
4 жыл бұрын
Then you will have to re aim the headlights
Greta video,thanks!
Does this process work for a 99 GMC Yukon as well?
@1AAuto
9 жыл бұрын
it would be the same procedure if it's not a Denali Model. We carry these replacement headlights on our website with free shipping. Here's a link to them. Hope this helps you out. www.1aauto.com/headlight-pair/i/1alhp00002?KZread&KZread&ATony
Do you have to remove the grill just to replace the bulbs? Per my 95 Chevy owner's manual all you need to do is take the two threaded pins out and the headlight pulls forward and out.
@markholland1778
4 жыл бұрын
@@jassyatwal530 actually only the low beam is accessible on the driver's side. On passenger side have to remove the battery. For high beam, have to pull the assembly out.
@DonLytle
2 жыл бұрын
NO! Remove the four 5mm long bolts accessible from the top (the long ones that stick out). The front of the assembly drops out and you can replace all of the headlamps without removing the entire grille.
Is this the same process for a 96 k1500 Silverado?
@1AAuto
5 жыл бұрын
+Fish'nFireworks 14 The part shown in the video does fit your application. It should be the same or a similar procedure. Here is a link to them on our website. Hope this helps you out. www.1aauto.com/1A/HeadLights/Chevy/Tahoe/1ALHP00002?KZread&CTA+Comment&Nby-6G4_4qc
how do you adjust headlight?
Thank you
Good video but the driver side light looks crooked after the grill was replaced.
Can you change the lens without taking off the whole housing and grill?
@chandlermiller8099
6 жыл бұрын
marks man nope
@phuku240
5 жыл бұрын
Yes u can ...remove the two 5mm bolts and the light assembly will pop out leaving the mounting bracket attached to the radiator core support
Not a job you want to do outside at 10F or you will have a bunch of broken plastic. What a jacked up design. I have had my 99 burb for 10 years and just lost the first headlight so had no idea what a pain this would be.
@andybub45
5 жыл бұрын
If its your low beam, simply reach behind and pull out the bulb
Awesome
@1AAuto
5 жыл бұрын
+Andrew Lessane Thank you!
Well I just had to replace the driver side low beam which was relatively simple cuz you could do it from under the hood but after watching this video I want to know the name of the engineer that thought this up so I can pop him in the nose because when I bought this Yukon it had this giant brush guard mounted to the front bumper which means I have to remove that and the Grill just to change a bulb, looks like I might be putting this thing up on AutoTrader real soon.......
97 Tahoe could use new lens up front , looks easy enough may go led headlights anybody have experience with led and older tahoe.
@1AAuto
4 жыл бұрын
+Michael Holloway Thanks for checking us out!
That grill tho
I have a brush guard on my 2000 Tahoe. NOT looking forward to this at all!!!
Thanks for the info. Thumbs down to whoever designed this vehicle.
@1AAuto
3 жыл бұрын
+Randy Spires Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
don't EVER pull on the cords like he did. That's just wrong.
@TrainCrazy.
5 жыл бұрын
They are called wires....but yea, don't pull on the wires