No video
How To Replace Fuel Filter MAZDA CX5 In Tank Filter
MAZDA CX-5 KE 2.0L SkyActiv-G Petrol Direct Inj. 4cyl 4dr Wagon 6sp Auto FWD 2012 To 2017
Hi
If you are looking for help with your Automotive Repairs, Automobile Installations, Mechanical Repair or Adjustment, please head over to carfix for information on it
Please drop your comments and subscribe if you like my videos. Thanks for all the support.
Disclaimer
We are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not carfix
Пікірлер: 25
to me, I will replace the fuel filter when the tank is only 1/3 left :D . Thank Carfix.
you don't blow the dust, but suck it up with a vaacum.. exactly when you lifted the filter assembly at @3:55, you let many dust get into the fuel. duh!!!
Good video, I’ll be attempting this soon. Can you do a step by step video on how to do timing chain replace on cx-5 2.5L 2016 because that’s what I have
I noticed you didn't actually replace the filter material, the triangle padding at the bottom, but you replaced the inner housing, wouldn't it make sense to do the opposite? Just replace the filter padding material itself, and just clean the plastic housing? Btw which type of grease would you use for the O-rings that won't contaminate the gas, but still do it's job by lubricating?
@Lengsel7
Жыл бұрын
That housing IS the actual filter. That bottom mesh is a screen, which, if it were me, I would clean.
I’m also aware that the housing has a different filter element inside of it.
Did you clean the filter on the bottom of the orange piece before you put it back on? It looked really dirty initially, then when you put it back on, it looked much cleaner.
@popeyevalls
Ай бұрын
Any answers to your question yet? I have the same concern.
When you pulled it out of the tank, the excess flexible fuel inlet line was inside the housing. On reassembly it is not inside.
@koksionglee7978
17 күн бұрын
I noticed that too.
Does motor socket power supply postition matter? I am afraid misplace the right to the leff
Can the filter screen be replaced also??
Also a head gasket change video to if possible I just wanna learn 😅
Good job 👏 👍
عمل جيد
you left the fuel hose outside the can.
where can i find this part? may ihave the adress? TY
@carfix1993
Жыл бұрын
Repco
How often you should change it?
@carfix1993
8 ай бұрын
80000km
@davidellis2579
6 ай бұрын
Handbook service schedule says 150000km
@koksionglee7978
17 күн бұрын
Around every 3 years
@koksionglee7978
17 күн бұрын
Noticed routing of fuel hose wrong on the outside and why not replace the strainer?
You only cleaned the filter and replaced the housing. To me that was a waste of money.
That is really a stupid design.