carfix

carfix

hi

If you are looking for help with your Automotive Repairs, Automobile Installations, Mechanical Repair or Adjustment, please head over to carfix for information on it
Please drop your comments and subscribe if you like my videos. Thanks for all the support.

Пікірлер

  • @JBSbass
    @JBSbassСағат бұрын

    in my 2016 Hilux it has a slow release pressure arm on the left hand side. If I forced removed the box like you did I would break it, like it looks like you did.

  • @808G8GT
    @808G8GT10 сағат бұрын

    Globbed?

  • @808G8GT
    @808G8GT10 сағат бұрын

    I can't stress this enough...BEFORE you remove the fuel filter, CLEAN ALL the dirt, dust, and debris around the entire area. Basically, eALL surfaces that are visible through the fuel filter access port. Us a paintbrush, vaccum, and some rags. The LAST thing you want is the dorst to go into you fuel tank and cause a whole bunch of problems, premature fuel pump failure, clogged fuel filter/ system, rust in the gast tank, etc. A ton of money and time wasted. Let's not mention MAJOR headaches. Also, just buy a drop in Fuel pump. It comes 100% assembled with all new components. Less chance of things breaking when transfering over parts.

  • @shpark2659
    @shpark265916 сағат бұрын

    hi there, I have same problem both button not working volume and cruse control so I changed new clock spring after that volume working but cruse still not working.. what can i do?

  • @salseto9
    @salseto923 сағат бұрын

    Just buy a ball joint removal tool, you'll end up cracking the knuckle by hammering it.

  • @user-ht8ki6zf7x
    @user-ht8ki6zf7xКүн бұрын

    Cadê o extrator de pivô

  • @jecht7333
    @jecht7333Күн бұрын

    Just needs a new cv boot and pick up ring and wete all set

  • @Olzhobaev
    @OlzhobaevКүн бұрын

    Фигня

  • @Daler-mahram
    @Daler-mahramКүн бұрын

    Здравствуйте! Какой артикул данного фильтра топливного

  • @dronewild3234
    @dronewild3234Күн бұрын

    Hi Mate, many thanks. Which one is solenoid B please?

  • @IndraNand-jk5nq
    @IndraNand-jk5nq2 күн бұрын

    My case the beep is continous?

  • @keitaabdoul4087
    @keitaabdoul40872 күн бұрын

    Vous deviez présenter le boulon avant de taper

  • @reillyp8115
    @reillyp81152 күн бұрын

    Touch it i dare you

  • @ApoMahn-t9h
    @ApoMahn-t9h2 күн бұрын

    I start my car and the Exhaust smoke comes out through the inlet manifold

  • @reillyp8115
    @reillyp81152 күн бұрын

    Pickle fork is easier

  • @Adrian-cz5wn
    @Adrian-cz5wn3 күн бұрын

    A la vieja Escuela 👍👍

  • @Dumb_Money
    @Dumb_Money3 күн бұрын

    Balance axel timing mark was not in right position, it's the lowest round axel on low left?

  • @Dumb_Money
    @Dumb_Money3 күн бұрын

    @12:13

  • @user-vm1tp4tg7b
    @user-vm1tp4tg7b3 күн бұрын

    Кариес

  • @JoyceThora
    @JoyceThora3 күн бұрын

    What did you use to clean the plate of the head gasket ? 0:14

  • @2841orlando
    @2841orlando3 күн бұрын

    What do you guys recommend removing the transmission or the motor for this Job i got a 1997 camry 4 cylinder

  • @spanknanny29
    @spanknanny293 күн бұрын

    Thank you for this :D

  • @user-hw3yn9fw8l
    @user-hw3yn9fw8l4 күн бұрын

    На "сервисе" так делать... НЕ рекомендуется...

  • @alirezamah7000
    @alirezamah70004 күн бұрын

    Can you idiot proof this video? Start by showing, how to remove the back seat.

  • @MichaelHeroes4you
    @MichaelHeroes4you4 күн бұрын

    Hello! Help me please. My Toyota RAV4 G3 from 2006 with 206 thousand km, 177 hp, 6-speed diesel manual has a leak in the water cooling cap. The cooling cover, water pump, belt and thermostat have already been replaced. But it still continues to leak water. When I pull the engine oil dipstick, everything is ok, just oil with no traces of water. The cooling water is as it should be, without any traces of rust, it is clean. The car has power, it doesn't fail, it doesn't smoke and everything appears to be fine on the dashboard. The temperature remains normal. I live in Germany and the mechanic told me to wait because he is trying to find a video to show me what he wants to do, a KZread video. He is saying that there is a certain liquid that will be able to plug or seal (in the head gasket) and solve this supposed problem that he thinks is the head gasket. I'm already seeing another mechanic to also try to find the problem with this leak. I would like to know your opinion on what it could be. Thanks.

  • @Abszurdista-fatalista
    @Abszurdista-fatalista4 күн бұрын

    I have the same engine (Camry, 2022) and it amazes me every time how rough these idle, which is supposedly normal. ??

  • @user-tm4dg9et4b
    @user-tm4dg9et4b4 күн бұрын

    Illustrate the sound showing defect

  • @MaskedVigilante-gw4jx
    @MaskedVigilante-gw4jx4 күн бұрын

    А из-за чрезмерного перемещения переднего моста тем временем требуют замены уплотнительные кольца внутри коробки передач.

  • @alekmartin9999
    @alekmartin99994 күн бұрын

    Is it same in 1 gen highlander?

  • @AJ-ew7kr
    @AJ-ew7kr4 күн бұрын

    The bolt that holds that whole piece is being blocked by the other green clipped part. How do I love that part over to be able to remove the bolt?

  • @fx7001
    @fx70015 күн бұрын

    What's up friend, sorry. I have a 2002 Pryus and I'm struggling, I don't know how to do it. I open the switch and turn on the key but the power goes out and it doesn't start.

  • @Bayuhutamamotor
    @Bayuhutamamotor5 күн бұрын

    Nyimak ulasannya bosque, sangat bermanfaat ilmunya

  • @benjaminnarbut8994
    @benjaminnarbut89945 күн бұрын

    And Honda only pays 6 hours to replace 🤣

  • @TheWakeUpBoyy
    @TheWakeUpBoyy5 күн бұрын

    How many injectors do is250 has? Someone told me it has 6 to 12 injectors Please rply

  • @Cabby-om2tv
    @Cabby-om2tv5 күн бұрын

    He’s actually re-engaging the parking brake after it’s on service mode otherwise to back off the piston he would be pushing forward not holding up on the button.

  • @mikimiki195
    @mikimiki1956 күн бұрын

    Hold on you did all that work but skip on cleaning valves the most important part of this job?

  • @leliondebarbarie8862
    @leliondebarbarie88626 күн бұрын

    Viva Algérie 😂

  • @LinhVu-jt5di
    @LinhVu-jt5di6 күн бұрын

    where can I buy the corolla 2007 fuel filter? your link to amazon does not work anymore. Thanks, Linh

  • @enriqueorihuela8717
    @enriqueorihuela87176 күн бұрын

    No no no no es real cortaste ala hora de sacar la tapa de los inyectores y activaste cuando ya está desprendido así no juega Peru

  • @michaelwhite9863
    @michaelwhite98636 күн бұрын

    Cucumber fork Oh crap a Pickle Fork 😅

  • @SuperMaverick4u
    @SuperMaverick4u7 күн бұрын

    Looks like that transmission didnt have any oil eversince.

  • @jasonneely3735
    @jasonneely37357 күн бұрын

    Just wanted to post this higher for folks that still looking at this video: courtesy of a commenter below search for this part# 27225-8H31C. It is just the blower motor. Unscrew the nut on the top of the fan, push/tap the motor to seperate from the fan, push the new motor in, paying attention that you're lining the notch up properly. This is the way. As of Jul24, Amazon has the motors as low as 20USD which is a steal these day.

  • @ST-eo8ve
    @ST-eo8ve7 күн бұрын

    Nevalja tući s jedne strane.Postavi drugi čekić s druge strane da amortizira.Tako nećeš otkinuti dio.

  • @user-nj7ct7vi6u
    @user-nj7ct7vi6u7 күн бұрын

    Ich verstehe nicht, wie jemand der jeden Tag mit Autos arbeitet , nicht mal so ein Abspreizer für 50 € in seinem Werkzeug hat ..... kapiere ich nicht ......lieber wie so ein irrer mit dem Hammer auf diesem Teil rum prügeln und mit Haarrissen versehen....

  • @Icepressa
    @Icepressa7 күн бұрын

    kzread.infoSjva0CgilRo hit it 100 times you'll never get it out, use the separator by it self you will never get it out, use heat,seperator and hammer all at once and you'll always get it out

  • @kenjimisaki6666
    @kenjimisaki66667 күн бұрын

    It's designed like this because this is meant to be a lifetime filter.

  • @Okayy02384
    @Okayy023847 күн бұрын

    Damn! My car was factory restored.

  • @ulisestellez8113
    @ulisestellez81138 күн бұрын

    Yo uso un bronce y no maltrato el eje

  • @thilinajayaweera1965
    @thilinajayaweera19658 күн бұрын

    Is it possible to remove blend door actuator only ?

  • @greewus74
    @greewus748 күн бұрын

    Это видео о том, как нельзя делать.

  • @ZafarIqbal-zm4lm
    @ZafarIqbal-zm4lm8 күн бұрын

    First, you should know what you are going to do. What you have removed is not a ball joint. This is a tie rod end.