How to Replace Front Window Regulator 2004-10 BMW X3
Buy Now!
New Window Regulator from 1AAuto.com 1aau.to/ia/1AWRG01610
Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle! This video shows you how to replace both the window regulator and the motor on your 2004-10 BMW X3.
• Check here for more videos on the 2004-10 BMW X3: • BMW X3 2004-10 1st Ge...
This process should be similar on the following vehicles:
2004 BMW X3
2005 BMW X3
2006 BMW X3
2007 BMW X3
2008 BMW X3
2009 BMW X3
2010 BMW X3
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• 10mm Socket 1aau.to/oa/1AXAA00017
• Trim Tool Set 1aau.to/oa/1AXXX00006
• Wire Cutters
• T25 Driver 1aau.to/oa/1AXAA00008
• T30 Driver 1aau.to/oa/1AXAA00008
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Painter's Tape
• Magnet - Extendable
• Utility Knife 1aau.to/oa/1AXAA00082
Subscribe: / @trq
Check out our playlist:
BMW X3 2004-10 1st Gen E83: • BMW X3 2004-10 1st Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 24
√
The regulator I bought from you guys fits perfect and works flawlessly for my 2010 X3 (drivers side front). My window was stuck in the up position, so before I could place the notches in the bottom part of the glass in the clips, I had to carefully lower the window by hand. It's harder than it looks to remove the old regulator, took a few minutes to get it out. Excellent and succinct tutorial, much better than all the others I watched. Thanks for this.
Mines fell to bits where do the springs go
Those white clip to re attach to the glass are a pain unless I have a incorrect regulator it will not re attach
after I did it the airbag light on the front desk was red. Seems to not be connected. I've done it exactly as described.
You have no airbag
Thanks My Man, I saved few euro thanks to you all best 👊😉
Thank you!!! Excellent tutorial, perfect followed step by step. Saved £££££’s
Thank you so much, it was very helpful
my regulator wires broke and the window motor was actuated up a few times until we figured out it was broken. is there a way to make the motor and regulator are in sink or does it matter? Thank you ... great video!
Thanks brother! Bless you!
Maaaaaannnnnnnnnn Daaaaaaammmmmmm, This has Been the Best R&R video I have ever seen.
"line up all the clips" - HA. All but two of mine fell off, 2004 X3.
Need to do mine this week .. will definitely follow this video...
Make sure the window is properly fitted in the weather stripping on the post side & leave the tailgate open. With the battery disconnected U will not B able 2 get in.
Thanks great video
Question Please? Most of the brackets have come off of the Panel. What type of adhesive do I use to glue them back in their place? Will Hot Glue work?
👍
that door panel is so dumb