How to Replace Front Wheel Hub and Bearing 09-12 Toyota RAV4
Автокөліктер мен көлік құралдары
Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHS00509
1A Auto shows you how to repair, install, fix, change or replace a worn out, vibrating or groaning wheel bearing hub. This video is applicable to the 09, 10, 11, 12, Toyota Rav4.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oanE/1AXAA00013
• Pry Bar 1aau.to/oh3/1AXAA00020
• 17mm Wrench 1aau.to/oqt/1AXAA00010
• 10mm Socket 1aau.to/oZe/1AXAA00017
• 14mm Deep Socket
• 17mm Socket 1aau.to/o8D/1AXAA00015
• 21mm Socket 1aau.to/osN/1AXAA00043
• 30mm 12-Point Socket 1aau.to/oj/1AAST00002
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/od/1AXAA00288
• Brake Caliper Hanger 1aau.to/oQ/1AXAA00084
• Pliers
• Ratchet 1aau.to/oapi/1AXAA00016
• Socket Extensions 1aau.to/o8D/1AXAA00015
• Torque Wrench 1aau.to/owJ/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oh4/1AXSS00035
• Rust Penetrant
• Center Punch 1aau.to/ocM/1AXAA00055
• Hammer 1aau.to/omT/1AXAA00091
• Wire Brush 1aau.to/oeS/1AXAA00079
For More Info visit us at 1aau.to/h/bSz/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 73
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
You guys saved my life once again. This is the 6th video that showed me how and what to do with my 2008 rav 4. Thanks so much. I'm also replacing the valve body on the transmission as soon as it gets here. Time consuming but it has to be done. I prey it helps and fixes the issue. Thanks again guys. Your all so amazing. 😊
Awesome video.Have an 07 rav4 and doing this soon. Have done brake pads and rotor and everything looks the same. Thanks for the tips you gave for removal and reassembly.
My Grandpa bought a 2010 rav4 a couple days ago, wheel vearing was bad from the start so i assume thtas why the last owners sold it. Now here i am warching the perfrct video on the same year vehicle and everything, perfect camera angles and demonstration. This should be an easy job thanks to you guys
Great video. Andy did a good job with the explanations. Step by step and very detailed. Well done!
I just did this about 6 mo's ago on our 2011. Living in the midwest, you learn to leave the abs sensor alone and work with it/around it.
Thank you guys for posting the version with the PBlaster and the tappy-tap-tap and not a rushed "this comes off, figure it out"
how did you manage to line up the center nut to the same spot you had to punch it?
OMG!!! This was an amazing video. Gonna need some extra tools but feel really confident in doing this myself. Toyota trying to charge me $1200 each side totaling $2400+ tax.
@NotMe-ej9yz
Жыл бұрын
F THAT! Couple hours of your time and $200-300 worth of parts to save 2 grand sounds like a good deal to me 😅
Great video! You can use a brass drift when you hit the axle and you never have to worry about damaging the threads.
@1AAuto
4 жыл бұрын
+Chicken Wings Thanks for the suggestion! 1aauto.com
Thanks for these video tutorials, you saved me a lot of money.
Thank you very very much, from Canada. This was a dream job with your instruction. :-)
Thank you for an awesome video! Much appreciated!👍
@1AAuto
3 жыл бұрын
+apagan65 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You guys are the Best to make videos thanks alot
@1AAuto
2 жыл бұрын
+Roberto Diaz Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excellent video quality.
Do the bolts seat the bearing? Or do I have to have them pressed in? I have a 2003 & need to replace mine. Thanks
Job well done, thanks
I have a whirling rotational noise on my RAV4 2011. I still get the noise after news tires, rotors and brakes. Going to put my winter tires/rims on and test for the noise. Thinking wheel bearings would be the next thing to replace? 112k miles.
Thanks for this vid!
Does the 30 mm 12 point socket have to be a deep well ?
What is the size of punch you are using?
Thank you for sharing
I have purchased a rear bearings for the RAV4 09 from your company and I replace them last night and this morning when I was driving I heard a very weird noise and then all of a sudden the ABS light and antilock all those lights they came out in the dashboard I am thinking this has something to do with the sensors I took the sensors out I replace the bearing with the sensors back I make sure that the wires or whatever that sensor it’s not touched or pinched or whatever and now I don’t know what the problem is is it the bearing itself that’s causing this or something else
Great video! Doing this on my 2010 RAV4 this weekend. Do I need to get an alignment afterwards?
@lorenzovonmatterhorn4756
2 жыл бұрын
Yes, it's recommended. From what I know.
Thank you!
I've tried using the slide hammer, sledge and the it seems the part that holds the wheel/rotor is separating from the part that attaches to the knuckle. I tried heating up the part, all kinds of penetrating lubricant and no joy. I'm about ready to remove the knuckle with the hub.
Why did you install new rotors and pads? You didn't mention a thing about that during the video.
I have to do this on a 2010. I live in the rust belt and I have a feeling it's going to take a little longer than the 8 minutes it took to remove it in this video and more than just a few taps with a mini sledge.
I need to change my from right hub on my 2010 rav4, should I also change the left at the same time? Only the right side has a problem, it sound like the beating is bad.
@1AAuto
3 жыл бұрын
+Plamen Dobrev It's usually a good idea to do both at the same time if it would be more convenient for you. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@histguy101
3 жыл бұрын
I changed the front driver hub on my 2010 Rav about 8 months ago, and all was well again... until now, when the front passenger hub went bad. And the first thing I thought was "man, I wish I had just gotten a pair and done them both at the same time."
2018 toyota sienta front wheel hub fix like this?
@1AAuto
6 ай бұрын
+@user-zu8fm9nw1u We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
Is it normal for 2010 Rav4 wheels to move back and forth or little play when parked?
@1AAuto
11 ай бұрын
+Man as We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Why take the calipers off?
What size bolt did you use to remove the rotor?
@MC4D.
2 жыл бұрын
I believe it's a 12mm, that's what he used for the rear hub on another vid
Order a AXLE NUT REMOVAL TOOL instead of using a punch. I tried what he did and it shaved some metal rearwards instead of upwards and clear of the threads. They make a perfect tool for this but only could find it online.
at 2:45, what size bolt do you use to “assist “ in the removal of the rotor?
@1AAuto
4 жыл бұрын
+Beanbag109 Thanks for checking us out! This is a 12 mm bolt that was used. This may vary depending on the vehicle and the size of that provision. 1aauto.com
@milwaukeebiker
4 жыл бұрын
@@1AAuto That is not a 12mm bolt. The head of that bolt takes a 12mm wrench doesn't mean it's 12mm bolt. There are also 2 to 3 different thread pitches for most metric bolts. Care to try again at a correct answer?
@machapu
9 ай бұрын
I went and bought 2 bolts. Holes looked about an M8 so I got an M8-1.25 and M8-1.0. The M8-1.25 was the one that worked for me.
Do you need to get an alignment after doing this?
@cea-jaymales8031
2 жыл бұрын
I'm not a mechanic but I'm guessing you shouldn't have to. Can't see why you would need to as you didn't change the alignment settings but I might be wrong
Same process with the 4wd.?
@1AAuto
3 жыл бұрын
+Santy Gomez This video is applicable to all 09, 10, 11, 12, Toyota Rav4 models. Thanks for watching.
Correct me if I am wrong but aren’t you not supposed to double click it when using a torque wrench?
I use an air hammer to push in the axles with pb blaster, slide hammer on the hub, and a wobble socket to remove the hub bolts wish all cars were bolt on
@leonidas9969
Жыл бұрын
No rust here in Cali
It appears you reused the old axle nut. Why? Aren't you supposed to replace those with a fresh, new one?
@Joseph-eh4rs
2 жыл бұрын
Right, it's recommended to replace it.
im surprised constant vibration doesnt loosened up those bolts...
@1AAuto
4 жыл бұрын
+dsrevo79 Thanks for the feedback!
dont forget to take the cap off the brake resevoir before pushing the caliper back in
Whoever tries this,that nut is a bear to get off and the part that is driven into the slot doesn’t come out easy.
@1AAuto
3 жыл бұрын
+fw1421 Thanks for the feedback!
@45eno
10 ай бұрын
Yes my RAV4 should have been done yesterday but I tried to do what he did with a punch and it smushed some of the metal on the nut back. So now I’m worried this lower hanging metal will damage my threads. I ordered a axle nut removal tool which what I should have used from the start. If it doesn’t allow me to bend the crimp upward I will be left trying to Dremel that notch off. I have read horror stories about people taking that nut off with the crimp still not fully dealt with and wrecking their treads.
If hit the studs, don’t bworry, you change the bearing assembly anyways, thanks
While you were at it you should have done a brake fluid flush that fluid was nasty black! It's full of water.
For all asking about the rotor removing bolts, I have a 2011 V6 limited Rav4 and the bolts that worked for me were a M8x1.25 thread. Also don’t forget to remove your abs sensor. It’s expensive if you break it.
Public enemy #1: rust
Can you take the caliper brackets off without taking the caliper off first? So the caliper and brackets are still together.
@histguy101
3 жыл бұрын
yes, absolutely.
One thing you don't mention is make sure your caliper slider pins move freely in and out, it's very important if you want even brake pad wear and not a spongy brake pedal!!!
@lambertj.2892
2 жыл бұрын
Looks like he put new ones in anyway, so it doesn't matter.
How much?
I prepped, pre-prepped, and now im at post-prep because I DONT HAVE A *DEEP* 30mm 12 point socket... mine is a normal length good thing.. "Watches it spin the fkin axle. as the sun goes down".