No video

How to Replace Front Struts 2009-13 Ford F150

Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1AST...
TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2004-2008 Ford F150.
• Check here for more videos on the 2004-08 Ford F-150: • Ford F-150 2004-08 11t...
This process should be similar on the following vehicles:
2004 Ford F150 Truck
2005 Ford F150 Truck
2006 Ford F150 Truck
2007 Ford F150 Truck
2008 Ford F150 Truck
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Bungee Cord
• Gloves 1aau.to/oa/1AXS...
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses 1aau.to/oa/1AXA...
• Center Punch 1aau.to/oa/1AXA...
• Floor Jack 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford F150 2009-2014 12th Gen: • Ford F150 2009-2014 12...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 22

  • @TRQ
    @TRQ3 жыл бұрын

    √ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

  • @scottbrown3240
    @scottbrown32402 жыл бұрын

    well, you make it look pretty easy...but of course it never is.

  • @timg734
    @timg734 Жыл бұрын

    i always like watching your videos

  • @leemccready845
    @leemccready845 Жыл бұрын

    it's not necessary to separate the upper control arm and the knuckle.

  • @abdielrios9312
    @abdielrios93123 жыл бұрын

    Muchas gracias ¡saludos dsde Panamá¡ 😎

  • @thestig1899
    @thestig18993 жыл бұрын

    What size socket for the bottom nut and bolt

  • @johnathanramirez669
    @johnathanramirez669 Жыл бұрын

    This video would be at 100% if y’all listed the sizes of the bolts

  • @ivanhoejo9949
    @ivanhoejo9949 Жыл бұрын

    Nice...consolidated into specific, sequential moves. Removed are the curses and tears of prying, hammering, and torqueing away. And THAT is why they charge us $300-$400 a strut/shock...and other car repairs are ~$80 an hour.

  • @TRQ

    @TRQ

    Жыл бұрын

    +Ivanhoe Jo Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @ibejrr3546
    @ibejrr3546 Жыл бұрын

    Interesting how many different types of torching you have to do per bolt

  • @teamflanneloutdoors5631
    @teamflanneloutdoors56313 жыл бұрын

    Very nice 👍🏻 wish I had watched this one first. What is it with broken strut springs on F150’s? Bad hardening/heat treatment? Both of my 2011 xlt supercrew rwd springs were broke.

  • @williamkrampjr.8211

    @williamkrampjr.8211

    3 жыл бұрын

    Great question! I just bought a 2011 with 63k on it and I just found out both sides were busted while chasing a brake issue.

  • @treyabbey2766
    @treyabbey27663 жыл бұрын

    why does the new coils look more compressed than the old coils? what year truck is this?

  • @shellzhimself
    @shellzhimself Жыл бұрын

    Are the struts the same for 2WD and 4WD? I ask because I'm trying to buy some struts that says 4wd but it looks identical to the 2wd.

  • @bravopl
    @bravopl9 ай бұрын

    What size is socket for lower strut? I tried 1incg and is too small then 1 1/8 too big

  • @markduquette9335
    @markduquette9335 Жыл бұрын

    This is the first video where they did not take all the brakes and outer axle nut off and completely gut the front end. Looks similar to my 2010 so I will be doing this shortly. 400FT/LBS, Really?

  • @TRQ

    @TRQ

    Жыл бұрын

    +MARK DUQUETTE Thanks for watching! It does sound like a lot, but for these trucks the torque spec for the lower strut bolt is 406 lb-ft.

  • @chadellison5875
    @chadellison58753 жыл бұрын

    I have to do this on my lifted f150 with lifted spindle and the spacer on top of the strut. It’s being a pain to get out.

  • @jacob-bishop3984

    @jacob-bishop3984

    2 жыл бұрын

    I have a spacer on top of the strut as well I’m having hell trying to get the new shock in , do you have any tips on how I can get the lower control arm to hang a little lower mabye

  • @brianforsyth4122
    @brianforsyth412211 ай бұрын

    Thanks

  • @mattsinn9518
    @mattsinn9518 Жыл бұрын

    God, and for the next man who has to remove the bolts, good luck. I hate threadlock. Really kind of silly to use threadlock on parts that are clearly worn out!

  • @GETLITUP69
    @GETLITUP693 жыл бұрын

    Well my F150 just broke a spring...so guess what I'm doing!!! Eff