Buy Now!
New Steering Rack & Pinion Bellow from 1AAuto.com 1aau.to/ia/1ASTB00047
This video shows you how to install a new steering rack bellows boot on your 2003-2007 Honda Accord. The steering rack bellow is a plastic or rubber cover used to protect the joint between the steering rack and the tie rods from dirt, debris, water, and other contaminants that could corrode or damage the tie rod joint.
This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obLf/1AXAA00013
• 24mm Wrench
• 17mm Socket 1aau.to/ocf7/1AXAA00015
• 19mm Socket
• Pliers
• Side Cutters
• Ratchet 1aau.to/ocgR/1AXAA00016
• Socket Extensions 1aau.to/ocf7/1AXAA00015
• Torque Wrench 1aau.to/obju/1AXAA00044
• Gloves 1aau.to/obko/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oaDF/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oaqj/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.