How to Replace Front Lower Ball Joint 2004-2006 Scion xB

Автокөліктер мен көлік құралдары

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASBJ00310
This video shows you how to install a front lower ball joint on your 2004-2006 Scion xB. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2004 Scion xB
2005 Scion xB
2006 Scion xB
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 19mm Wrench 1aau.to/oa/1AXAA00010
• 14mm Socket 1aau.to/oa/1AXAA00015
• 17mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• 30mm 12-Point Socket 1aau.to/oa/1AAST00002
• Angle Grinder
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/oa/1AXAA00084
• Pickle Fork
• Pliers
• Side Cutters
• Snap Ring Pliers
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Cloth Rags 1aau.to/oa/1AXSS00035
• Copper Anti-Seize
• Liquid Thread Locker
• Rust Penetrant
• Center Punch 1aau.to/oa/1AXAA00055
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
• Pick 1aau.to/oa/1AXAA00037
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 11

  • @TRQ
    @TRQ Жыл бұрын

    √ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

  • @capju854

    @capju854

    Жыл бұрын

    good video, thanks, will remember, TRQ,

  • @joshuastokes7573
    @joshuastokes75734 ай бұрын

    I’d be replaceing more than just that ball joint

  • @LujinCustom
    @LujinCustom Жыл бұрын

    Anyone else notice that he missed a cotter pin? 🤔

  • @capju854
    @capju854 Жыл бұрын

    good video, thanks, will remember, TRQ,

  • @malvinmartinez2345
    @malvinmartinez23454 ай бұрын

    is this video and parts the same for a 2006 scion xa, I ask because I removed my ball joint and now the new ball joint fits through its not sitting on half way to be pressed in I bought 2 different ball joints to make sure snd still same results

  • @grimgodley5481
    @grimgodley54818 ай бұрын

    How does the knuckle attach to the strut so easily for you? For me the cv axle is getting caught between the strut and the knuckle while I'm trying to align it. Did you loosen the strut tower from under the hood?

  • @jimmydeakins3701
    @jimmydeakins370111 ай бұрын

    Should the strut extend? If so how should I get it back

  • @lot5953
    @lot5953 Жыл бұрын

    I wish there is xD video on this

  • @pencilpusha1
    @pencilpusha1 Жыл бұрын

    Wow the rust 😮

  • @khodayehrangekaman315
    @khodayehrangekaman315 Жыл бұрын

    😊 🫡🫡🫡 🫠🤠 🤗👍👏👏👏 💚 🤍 🦁 ❤

Келесі