This is honestly one of the best tutorials I have seen on KZread. It's well explained so everyone can understand it. And guys, to those afraid of doing this, don't be. It looks scary but if you focus and take your time it isn't!

This video is great. after watching this video a few times it looks less difficult but you one must keep track of where all the small parts go.

Screw this screw.

Just finished this. Mum had a bent and dented housing and decided to fix it for her on Mother’s Day. Here’s how it went: If you are not familiar with phones and how they are built, I would not strongly recommend doing this. I have repaired multiple phone screens and done multiple battery replacements so I am familiar with the inside of a phone. Before you do ANYTHING, make sure you download and print out a screw map/diagram. Keep your screws on the diagram as you disassemble it. It is VERY easy to lose and mix up the screws, so make sure you have them organised and know exactly what goes where. One thing that really pissed me off and made the job so much harder and longer were the battery pull tabs. These almost ALWAYS break and it’s such a pain to get the battery out without damaging it. Expect to use tweezers and fishing line to cut out the adhesive. Apart from that there’s not much more I can say, it’s a difficult and time consuming process. Attempt this at your own risk. I now have a happy mum :)

@shafzkay1594

3 жыл бұрын

do u know any websites where i can get free screw map/diagrams from?

Fantastic video, loved the quality and how thorough you were. However you need to remove the battery flex cable prior to removing the LCD flex cables or you may cause a short circuit. Please keep up your hard work

Just did this. Thanks for the tutorial. Phone looks great in full green and black with green glass. I will say, there are steps that need to be addressed if you are trying to do this to your iphones. Take note, as mentioned by many others, the strip cables are really ON there. Use a heat gun or slowly pry it with a very small flat head like I did. Go slow, pull lightly. Believe it or not, there are a little harder to break than you may think. ALSO, very important: The colored buttons that come with the backing DO NOT work just by replacing them with the current ones. You MUST take off those metal flaps off the old buttons and transfer/apply them to the new buttons. ALSO, you must transfer the VERY small piece of metal (circle) that is under the button that directly comes into contact with the strip cable. This closes the very tiny gap between the button and the strip cable and it will make the button work. Without it, the button will not click properly, or at all. It also comes with a new slice/sound button (the one above the volume buttons). This can be taken off pretty easily if you look at it closely. This can be done, hell I did it, and i dont consider myself to be very good at these things, just be patient and a stickler for detail. The only 3 things to keep in mind -Keep screws neat and in order ( i drew the piece on a paper with circles indicating where the screws went and placed the screws in the circles.) A place mat if you will. - Strip cables are a bitch go slow, pull lightly, pry with something, like in the video. - If you are planning on transferring the buttons as well, you must gut the button from the phone and replace all pieces onto the new button. VERY EASY TO LOSE these pieces Good luck

@Bum5GHTKrew

6 жыл бұрын

fuzzy fuzzyjems how many bits do you need for the whole process did you buy a set on ebay or somthing? And what sizes if you dont mind me asking

@Dan-2025

5 жыл бұрын

Thanks for the info man! I can't wait to make my iPhone look new again! :)

Great video. Very detailed, no talking just awesome instrumental. Love it.

This is a good instructional guide. I followed along and I only have one problem, being that my camera doesn't focus in as close as it used to.

It took me around 5h but I did it. Im very glad. Thanks for posting this video I helped my a lot.

Thank you for this video, it really helped me. I replaced my iPhone 6 housing to iPhone 7 style housing. Everything works great except the rear camera. Might be because of the housing, because the camera hole is slightly repositioned.

Get Original Replacement Parts For iPhone 6 / 6 Plus ： witrigs.com/en1zh

Lovey video you've made! This is makin it so Much easier for people to do this then selfs

@EricWitrigs

9 жыл бұрын

Thanks for your appreciation!

I'm alright, I'll stick with my scratched iPhone xD

@dr.joint4204

6 жыл бұрын

MyUnboxingsAndFun yeah man same XD

@dextraindira318

6 жыл бұрын

yepp same i changed my mind, i’ll be fine with my scratched iphone also.

@shazaibkazi2002

6 жыл бұрын

Dex Delevine one of mt friend change his iphone body and then wify bluetooth is not working properly

@annhill20111

5 жыл бұрын

MyUnboxingsAndFun yeah same no doubt. That’s some crazy complicated steps even for me. Omg just noooooooo!

@officialcappo

2 ай бұрын

real men risk it

Thanks man I dit it and it even works fine. But I had to watch it several times. I'm not a phone expert but somehow I managed to do it. Keep in mind take a picture of the screws and the prices before you unscrew.

I love this woman's tiny perfectly manicured hands. They make it all look so reasonable. With my much larger, rough and not well manicured hands it is still possible and I just completed switching my phone's guts to a new straight case with a new battery, screen, LCD, Digitizer and a few other little things. Works great again. Thank you for the the video!

changed power input and battery with the help of this video, the battery caugth alight and sparked but was all good in the end ,smiles and hard ons all round ;-) i am a happy punter. the trick is remember what screws came from what hole and take your time

After seeing the video i hv decided not to do this by myself ever. Hard sh*t

@scottm9502

7 жыл бұрын

Puneet Sharma go cell phone repair's video is a full 1 1/2 hour guide if you need one. It's really detailed and helps. Also if it's to hard for you just hire someone for 20$

@jwillmadeit

7 жыл бұрын

HAHAHA :D

This is an amazing tutorial! Very precise thank you so much!

Thank you for the tutorial. Replaced the whole rear on my iphone 6.

@ForeverTalented92

8 жыл бұрын

+luis Luis Shoot do mines. lol. I'm afraid to open my phone and i just watch the whole video while thinking h*** naw, oohhh wait, you might break that.

thankyou so much.. just because of you... i got my iphone6 128gb saved✌️

Wow, those are a lot of tiny parts. I took a Galaxy S4 apart, and it was pretty much the motherboard with a few extra attached to it. I appreciate my iPhone a lot more now

Very clear , Love it.

That suction clamp looks like it could be made at home by gluing suction cups to a stapler

great video i will be customizing my iphone 6 plus now i did before back when i had the iphone 3g

Doesn't look too bad, will defo give it a try

awesome video explaining step by step

Excellent tutorial many thanks :)

From previous experience! Remove the battery terminal cable first. While the screen is in the 90 degrees angle. Saves the motherboard from electrical damage, and shorting out.

Thanks! follow your tutorial and everything works perfectly!

@EricWitrigs

7 жыл бұрын

That's great, thanks for your kindly feedback.

@mattshaw6285

7 жыл бұрын

Wit Rigs Does this work for the iPhone 6 Plus?

@cain.74

6 жыл бұрын

Matt Shaw all phones

Great vid and nice tune !

Great video. Bravo

why is this video is sooooo hypnotizing. good music choice. sound like something from gta vice city

Took me 37 mins to fix it 💪🏼 great video dude

@EricWitrigs

7 жыл бұрын

That's great!

hellow!! i am from switzerland, and i love your video !! its so easi with your video, i have make my iphone self and look's great!! thanks so much, very helpfull video

@EricWitrigs

9 жыл бұрын

xMotherFucker Glad to help you.

I'll Do This After I Buy A New Iphone😄 Just In case If I Accidentally Break It When I Replace The Housing. Thanks For The Tutorial

Changed my mind

@CaioPBD

7 жыл бұрын

MolliRae didnt we all?

@alexmorris8546

7 жыл бұрын

+Caio Soares I'm thinking I'll buy it and then take it to a place in the mall and let them switch it. Might cost $50 extra tho ughhh

Woah this looks so tricky just to replace the back plate omg O:

Very complete tutorial,easy fo follow Thx

@EricWitrigs

7 жыл бұрын

Thanks for feedback.

Thanks for this! Such a big help :))

Amazing!! Thanks a lot!!

Brilliant -Thank you!

this is helpful to me thank you..........................

Perfect music for the tedious work! Btw where do you go to get your screens replacements?

i changed my mind. i'll just stay with lot of scratches and dents😄

Thank you I appreciate it 👍🏾

thx man.... really handy video

Well im going for it . I need to figure out where I can get new adhesive stickers for the battery. Also I noticed that when you were puttting everything back in it was the same backing. Is there any type of adhesive that will keep the mother board etc stuck on the back or is there no need for that please get back to me on this lol

Was gonna refurbish an iPhone 6 I got for $40, broken home button, battery last for 2 minutes, and mild dents. Now after seeing all the very tiny parts that I thought would have all came out in one price is making me decided whether or not I want to try this...

Missed a few things like speaker gauze, charger spacer and also put the side bits in the wrong way round. Apart from that nice and easy!

Horayy!!! now I have all black iPhone 6 instead of a white and gold!

@SoundBlastMC

8 жыл бұрын

+SlenderPlaysMC (SlenderPlaysMC) i changed the whole lcd

@lancastergreenfield549

8 жыл бұрын

+Rafli Putra (SoundBlastMC) was it hard for you to do?

@Dasanie

7 жыл бұрын

+Rafli Putra (SoundBlastMC) either he night a sticker or he replaced the home button. But if he did replace the home button than he would lose the finger print capability. Every motherboard can only function with one home button.

@amzarmimieamzar698

4 жыл бұрын

Andy does it fit ? If my phone was black and i change ghe screen into gold ?

thanks my friend for you beautiful video

Please do iPhone 6s housing replacement

Perfect video

Great, exact vid!

Thanks great video

素晴らしい fantastic! I'll try!

So nice and detail video. Even hands are beautiful 😀

Thank you so much , I have a very nice phone now

thank you verymuch

only thing i would add, is you should disconnect the battery before removing the screen connectors.

Thanks for the concise video. One error: you never reinstalled the SIM card and tray...

this video is really helpful but can you put the size chart of screws? I need to know all of them. I mixed them and have no idea how to figure it out now

@EricWitrigs

8 жыл бұрын

+CiniK - OSI you can find the exact size in the products www.witrigs.com/screw-driver-for-iphone-3g-3gs, www.witrigs.com/best-torx-screw-driver-green-for-iphone-4, you will use this kind of tool.

Nice video, but not forget the small label/stick under the SIM card place, otherwise you can not get the SIM card holder out...with the Sim tool...!!

Yes I have a 6 plus and the first time I went without a case on my phone dropped it and have 3 dings on the corners of my housing there those lil scuffed imprints I'm trying to find an oem back housing and then just replace by following your video any advice as to what I need or what I should do would be awesome

@EricWitrigs

8 жыл бұрын

+John Douglas You need to tear down the phone and remove all the internal parts, just be careful not to break other parts like screen. Here are some tips: 1. Don’t mix up screws. They are different in length. 2. Clean camera lens before installing rear camera. 3. There is a wired Phillips screws securing the motherboard which is marked by blue circle in video. You can undo it by a 2.0mm flathead screwdriver. You may also need some repair tools like: 1. Suction cup clamp - bit.ly/1Mbid2L 2. Pentalobe screwdriver - bit.ly/1KwqUJu 3. Phillips screwdriver - bit.ly/1ANtwYq bit.ly/1BNDNcw 4. Spudger - bit.ly/1zlSaEG 5. Tweezers - bit.ly/1BpXgzq To finish the reassembly work, you also need: Battery sticker: www.witrigs.com/oem-battery-sticker-for-iphone-6

Is this tutorial same for the 6s

whats an efficient way to manage and not mix up all the different screws?

What is the purpose of sticky strips you put on battery for. Is it possible to buy them, are they necessary.

perfect worked great for me thanks a lot :)

@EricWitrigs

6 жыл бұрын

You are welcome :)

Ahhh yeah no thanks. Thank you for making the video. It convinced me that it's way more than i care to take on lol.

Thank for video

THANK YOU!!!

Nice tutorial, but I have a question. If a replace my rear housing will it keep all the things I had on my old phone.

@cevdb9087

8 жыл бұрын

+Lord Sparkle Bottom yes bro just make sure to power of your phone first second disable your battery and then everything shut stay in your phone memory but you better take a bakup before you do this

Great video. Thinking about using this so I can replace my gold housing for a rose gold one

@rudramadhabroutray

6 жыл бұрын

Rock'ca Holic am doing the same to my gold one

@suckmydingledong

5 жыл бұрын

@@rudramadhabroutray lol I'm doing the opposite

Could you do one of these for the 6s plus? Or know of a video? Thanks.

Cool Video in my case, my phone fell on stirs and had to change the screen and it presses keys on its own most time and it stays still like frozen if i press the top of the phone (close to the front camera) it works fine don't really know if its the housing thought its the screen but tried on 3different screen same result.. any advise ?

I spent almost 3 hours replacing my iPhone 6's housing. Unfortunately, the vibrator somehow won't work any more. Except that, everything is okay!! I am gonna buy another vibrator and replace it.

thank you

thanks all working good

i have an iPhone 6s and got the housing replaced or a 24t gold one. When they put it back together it doesn't switch on and when it is in charge it just goes from the white apple screen to black continuously. Do you have any idea what the problem might be? they said it is the battery and i should buy a new one and have it replaced.

Is this made out of the same material as the original, would we feel a difference when using the iPhone? Also does the custom back already come with the camera lens and the flash stuff on the back?

@EricWitrigs

9 жыл бұрын

RH VC Yes, it is also made of aluminum material and gives the same feeling as the original one. And it comes with camera lens and rear camera retaining bracket.

do you think there is enough room to put a thin metal plate behind the battery for a magnetic phone mount? it is approx .02" thick

Thank you :-) I did it... 9mins? No way! 1,5h :-)

i saw an ebay listing of an iphone 6 motherboard and it does'nt look like this one

@jacksonnunziante2969

7 жыл бұрын

Then it's probably fake, don't buy it.

@supboi5845

3 жыл бұрын

@Andy Leonidas You and Callan are a pathetic excuse of a "person". Go shove your scam where the sun doesn't shine.

Whats the cable with two screw holes on each end next to the camera on the right side? Mines gone i think its effecting my service

I have a question I got new volume buttons and power buttons and they do not have the rubber things and the little bar in back or Idk what it's called do I have to transfer it to the other buttons?

@brandonvisual1734

8 жыл бұрын

Yeah, you have to, and make sure the new buttons also have a sensor. The little silver circle in the back of the button.

Some of the accompanying choice of tunes would give one a headache, but what an exquisite tune to work to, like something from "The Thomas Crown Affair". A pleasure watching a master at work! Cheers!

@marcinc8103

7 жыл бұрын

what about pictures after changed cover...?

can someone please list a full list with all iphone 6s parts including screws ?

thank you a lot...

Its look like simple and easy but its hard for me because my anxiety heating me again

i dont get the screws of the motherboard out rip could it be the screwdriver or does apple tighten them so much?

could this help if I have a bend in my phone? because everytime I get my phone screen fixed because it cracks, the screen won't stay on correctly. Could I replace the frame and resolve this issue

hey friend i have a question is it possible to remove the icloud activation by changing the motherboard?

If I were to do this on an iPhone with a shattered screen, how much more difficult would it be? The repair shop said they couldn't fix it because the rear housing was bent.

@EricWitrigs

8 жыл бұрын

+SweetDream669 You need to check whether rear housing bent or not, if it bent, it is really difficult to install new screen,even it is impossible to install new screen.

Will I get any network issues if I change the back housing unit

Yes, hello i changed the housing perfectly but, the phone keeps saying no service or sometimes it says at&t , what can i do?

Hey, trying to peel the stickes off the battery, I accidently peel the black wrap off, Do you know if there's an issue plug it again?

Don't be scared people. Of course its a risk that something can go wrong because of ALOT of steps. But be very calm, sort everything out, i use small plastic bags for every section part, and mark them. I did this successfully,. but it took be some hours! Remember to transfer the old home button if you replace the front screen as well. If not, the fingerprint sensor will not function. The home button is paired to the logic board, and can not be reprogrammed to use another button.

Hello guys I can put my iPhone 6 normal version in the housing iPhone 6 plus? Thanks you Sorry for my English iam French

lol, "screw this screw" we probably dont need those screws right? XD , but as always this is an amazing video, but somehow it turned out a little blurry, but thats probably on youtubes side.. Thank You for your effort!

Thank u