Brilliant instructional vid!! Very much appreciated. Thanks for taking the time. All the best to you, Cheers

Awesome video jessa, it's very much appreciated that you are making these. I am a tech at a small repair shop and I have plenty of problems where there is board level repair needed and we have to send it off for fixes. Cannot wait to be able to do these repairs myself as we have a whole solder station and noone to do the repairs!

Your my favourite technician to watch anything to do and repair iphones, no messing, no time wasting and straight to the point , love you kind regards colin from croydon surrey England 👍👍👍👍👍❤

I had troubles soldering SODIMM connector to my prototype PCB - RPI CM3 carrier board. It looks like this technique (put tin on pcb first and then presolder with hot air) will solve my problem! Thank you for the video! Keep it up!

Thx a million Jessy you are the best. I managed to replace one after watching your video

Great video! Congrats from QUERÉTARO, Mexico. Hope I can attend practical board repair some day.

excellent instructional video ! very detailed and well explained, tips.......... perfect. And NO annoying music ! someone actually talking

@paulweston8184

4 жыл бұрын

Detailed? How do you open it? haha

Man you have skills, I ordered 5 - 6s connectors for a practice board and have used 4 up already. 1 left now I am gonna nail it lol....

@steve0826

4 жыл бұрын

Did you eventually buy Apple instead?

@Zendarkos

3 жыл бұрын

If you use a good quality soldering iron, with a fine tip, you can basically install the new connector using only the soldering iron. This way you are less likely to destroy it by excessive heat.

@pr0xZen

3 жыл бұрын

@@Zendarkos depends on your skill and steadiness with (regular) tweezers vs the iron. Some people are really steady, precise and swift with tweezers, but not with soldering iron or hot soldering tweezers. If you're one of those, using only hot air and regular tweezers, can yield just as good results. As Jessa points out here, if you're sensible about the temperature, you won't damage the plastic as long as you only touch and manipulate it by the beefy ground retaining tabs at each end.

@nayynizz2660

3 жыл бұрын

@Niel where did you buy the connectors from?

I sent my son's ipad mini to your store on 12/14/18 to have the logic board connector replaced. Thank you for helping to repair it, you've made my son very happy. I will say for anyone hesitant on repairing their devices, iPad Rehab did a wonderful job, I had my device back in less than 10 days (and it was just before Christmas ) and the price was right. Thank you again!! I will absolutely use again and will recommend to others. Happy New Year from Chattanooga, Tennessee!

@JessaJones

5 жыл бұрын

Hey Katie--thanks! We'd love a copy/paste of your review on iPad Rehab Google page so that other folks can see it. We got a troll review today that it would be nice to bury :(

@devinvance6441

5 жыл бұрын

iPad Rehab i need help fixing my 2 iphones

I do it exactly like you do apart from when iv re added solder I don't add any to the anchors. I only do that as iv found on some connectors the big anchor pads can take too much solder which stops the connector touching the regular pins properly. Il then go and solder the anchors after once the other pins are done. Your station is better than mine so prob removes the solder from the anchors a bit better than my cheap one :) , as I find it a ball ache to remove once added. Then I just do the same as you and go over each joint. Seems to do the job.

@JessaJones

6 жыл бұрын

I don't get ball aches, that's probably why it works for me.

This is a great video. Thank you. Do you mind letting us know how much heat in C did you apply?

BRAXISSIMA, ottimo anche il microscopio per vedere le saldature ! GOOD JOB !!!

Love your vids Jessa :)

I am new to this - Start learning then I can spend my time - Thanks

GREAT ! Excellent video lady . Thank You.

Thank you so much for this!

I watch you do the board repair and I miss working on those. I need a job fixing PCB's Nobody seems to fix electronics anymore except cell phones and tablets.

lady, you have my respect

I went through 5 connectors the first time I did one (ipad air 2 dig) but I am starting to get the hang of it. I only used 2 connectors last time....definitely a skill that has to be learned by doing it...Great video! Also can you guys please source some good iPad 3D BGA stencils? I would really like some especially for ipad air 2 and can't seem to find a good set anywhere...I will buy them as soon as you put them up in your store!

@JessaJones

6 жыл бұрын

+technolucas we have the 3D stencils that we use every day available at iPad rehab supply.

very good explanetion, thank you

Your great thank you for your time!!!

Great skills. Nice work!!

Good explain, and what temperature do you set?

You do nice work!

Thank you for this video !!!

Such a professional.

Добрый день! Подписался. Вы просто молодец!!! Умеете очень аккуратно и главное профессионално работать.

Wow. You are so intelligent and excellent as well.

Wow made that look so easy!

ipad rehab have you tried with the WD-40 I use it to desolder and solder the connector protects the plastic and does not burn the heat the best you do not need to use the captive to align it only aligns the new connector applies heat and ready the connector is accommodated alone and it is perfect alguin day test greetings

Fun to watch 😄 I need to replace that part on iPhone 6 and 8 🤯🤯

Really Helpful

Thank you excellent video

I love u r work ❤️

Nice teacher.are you very helpful

You are a genius

You have very stable work. Very cool super women fan from india

What lead wire should you use? Can you use the same one for all components on the Iphone/Ipad motherboard?

Jessa, you don't think is easier with solder paste?

Hi Jessa, I cannot seem to get the solder to reflow no matter what I do. I am using sn62 tin/lead solder and a hot air temp of 380. Can you advise which solder is best to get reflow?

Few pins on my phone are missing, is there any easy way to replace them without pulling the connector off?

Hi IPR ,what is the temperture that you use on hot air that it does not melt the conector plastic?

Where would it be possible to buy these connectors? I accidentally broke 3 pins off the volume and lightning connector. Its the 18pin one next to the lcd connectors.

Can you put tools used in the description

Please making videos about recovery data

i have a i phone 7plus display not showng lighting problom you can tell me sulution

I have an iPhone 6 plus that a repair shop messed up. I've been doing the simple LCD switch out that anyone can do but would like to try to learn how to solder. Should I learn on the motherboard of another spare device I have laying around and send this into you guys? Or learn and do this phone?

Question: I see both you and Louis Rossman use flux on connectors but there is rosin (flux) core solders so I wondering if you use flux by default because it aids in the soldering process or do you use rosin core solder on certain parts only? As an electronics tech I tend to use flux when I have more than one connection to work on. If it's a single side like a cap or resister I use rosin core solder to reduce the cleanup later.

Hi please how to regulate the hot air smd soldering station for a connector on the motherboard of a telephone please

Good job

Sounded like you were a bit flat jessa, that cold sapping the energy?

So, what temperature are you using? Where should I start testing?

thank you madam. From Algeria

what is the procedure to use padsviewer ? its very necessary and i dont know where its available !

HI HOW ARE U§ great work can u list of tools and brand u use it ! and heat temperature !

@JessaJones

6 жыл бұрын

You can find links to all our recommended equipment by clicking the video description

Hi God bless you. Please which chips do I have to change from a damaged logic board to another logic board please? Thxs

Since it’s leaded solder and stronger than unleaded, would it be adequate to simply add some solder to the corners once the new connector is put on rather than adding solder to each of the contact pads?

what temperature you use on air hot gun

What do you put to remove the connector? please, help me

can anyone help me? ?i have a 6s that wont charge past a certain amount of battery percentage. what part of the board is damaged or needs replacing? secondly, if i have another board, which part of the logic board do i have to swap over to the working board to bring over the unlocked apple id part

What temperature do you use on your hot air, around 320?

Idola!!! Gracias

Need to replace my Sony board connector..I was tried to fix it..but failed...plz reply mam

What is a reasonably safe temperature range here for a capable unit (ie. the typical Quick, Atten etc) - are we talking 375'C, or more in the 250'C range?

Hi dear, i am very much impressed while watching this video. But, i have facing a problem while i connect lcd strip into strip connector in Projector (Epson ELP 7600), Connector locking pin has broken and miss led. Kindly suggest and oblige.

Love your videos, I've got to renew fpc connector never done this before but I have all the equipment to do this, I know you don't but can I put heat tape all around the connector so I don't get any other components dislodge kind regards colin from croydon surrey England, ps I have spair logic boards to practice on first

Hello, would you help me to know the name of this equipment that you look through, to amplify the mainboard, like a microscope. I'd like to know the proper name. I thank you so much for the video and the answer.

@CarlosRocker42

4 жыл бұрын

Oh sorry, I found your video explaining it all! hehe. Thanks!

Hello everyone in the comment section, it's my first time fixing one of those issues with iPhones, and I have a question about it, because i find the missing pin on the LCD connector and I don't know if this problem cause a short circuit that warms the logic board once it's turned on. So I wanted to know if someone had a response to this because I don't know if this missing pin cause the short circuit

I am interested tring course

inspirador para quem pretende iniciar na profissao de repador de telemovel

miss... tutorial menggunakan blower quick 2008

Beautiful

What if the connector stripped off ..how could we fix it?

Hi, can you tell me which solder does you use??

Hello! Mam Can you make flex cable connector change I broke samsung J2 LCD connector . Connector on flex cable it's hard to give hot air

@7ossamelsayed346

3 жыл бұрын

Lol

I am new learned tacnician from where I can get apple phone schmaticdiagram

iPhone 7??? Nice hand work 👍👍

What type of solder? & Flux🤔

Verry good work mam

good day ma'am... what's the name of the flat wire that you scratch to clean to connector...i hope, you will answer me ma'am... thank you very much ..God bless ang more power...☺️🤗🤗

How much heat & air connector removing plz tell

HELLO I AM IN MALTA I WANT TO CO A TRAINING COURSES.

Can you help me ? My lg v521 fcp connector is tear down is it possible fixing it?

nice video

If you have to adjust the temperature on your reflow station because the air termperature is not consistent, why not use a separate meter with a thermocouple probe to verify the air temperature instead of having to guess.

FPC Conector charge iPhone7G is the same as iphone7plus?

My eye weak .which lence you use

I can not solder for nuts so wanted to know if you provide this service. I successfully damaged the LCD FPC connector on my moto Z4 and would like to get it replaced.

Hi how do you repair iphone xr lcd connector ?

I have an iPhone 8 Plus that the screen is 1/2 dim after screen replacement. Do you have a video where you fix that?

@alirahman4762

5 жыл бұрын

You have blown half of the backlight circuit. You probably did not remove the battery while installing the lcd. Repairing it is easy. It just one component you must have blown. but youll have to figure out which one.

Is there any tip adjustment to the hakko mini hot tweezers? The pivot screw seems, reasonably tight, but can't see any point of adjustments. I got a proper, matching T9-I set from official distributor (well over $100 around here), but the tips don't meet properly. Have to put significant sideways force at the same time as clamping them, otherwise the tips, are like at least 0.15-.2mmm off from meeting as intended. Making it really hard to get a grip on smds, and even worse keeping the grip. Because they slip off one end, and because the force exerted to push the yellow hinged portion sideways, induce small tremors, attenuated at the tweezer tips.

how much your using machine temperature ? please say me :(

@paparansen

5 жыл бұрын

you will never get an answer to that question

Thanks

Do you have classes on teaching to solder in NY?

@JessaJones

6 жыл бұрын

Yes. We can help you with that. Go to www.ipadrehab.com and choose Start Repair at the top of the page. Answer those questions and we will reply with a formal estimate and shipping instructions if you decide to send it in. Thanks for thinking of us for your board level repair needs. Call 585-397-4174 with any further questions.

What is that gel you use?

хороший канал, познавательный, отличный мастер, отличное оборудование.

Can you replace few of those on my phone?

How much would it cost for iPhone 11 repair? The lcd connector is damaged

The site recommended for buying spare parts are for university addimition advert