This man is a saint! Life saver, very knowledgeable! Keep it up dear sir! But if I may suggest, more of a disruptive title? To find it better 😊👌🏼 but other than that! Perfect! Just perfect!

Through your videos I've learned a great deal about my tankless system, more importantly you give the comfort level that I can tackle "some" repairs on my own. Thanks for taking the time out to talk me on the phone and walk me through troubleshooting my "intermittent heating" problem. You are a true professional!!

@TheBuddylab

3 жыл бұрын

Thank you very much

Thank you sir for the guidance. I have to replace one tomorrow 🙏🏽

Thank you for taking the time to make this video - its very helpful. Also, you videography skills are very good also, and that makes it easier to actually see what is going on.

@TheBuddylab

3 жыл бұрын

Thank you very much

Mike is 110% legit. His videos are so helpful. BIGGEST of all, he helped me over phone and email with some of my questions. TOP NOTCH. Dear reader, subscribe to this guy. He is amazing !!!

Great video. Helped me out quite a bit on my 12 year old RC98i. Same issue. No codes. Not kicking on. Tried to blow it out twice. Found the part # in that paper on the back of the door thanks to you. Found the part new for $85.00. The part did come with the O rings and the directions included in the kit were actually very good. Took about an hour to do. Immediately worked. Water also seams to be hotter and works faster than before. So it may have been degrading over time. Local repair company wanted $300.00 just to diagnose and recommended replacing it due to age. That would have been such a waste.

Great videos sir very detailed and informative.

Thank you for this video Mike. This was tremendously informative and also very applicable to my Noritz units that froze causing cracked main servo casings in Austin, Texas when the power went out for days. You saved me a lot of money and many days without hot water!

@TheBuddylab

3 жыл бұрын

Glad I could help. Mike

Excellent video doing a zoom to the object make it much more clear idea how it works! He’s should start online training classes.

Thanks for the video thanks a lot God bless you

@TheBuddylab

3 жыл бұрын

I’m glad I could help!!

Fantastic . Thank you.

Very much appreciate your video very informative

@ThatTanklessGuy

2 ай бұрын

Glad it was helpful!

Thank you for this video , but I would like to know what the bypass servo valve does in this unit ( its purpose / function ) ??

No luck with Rinnai shop, no luck with Ferguson in Denver Co

great video, based on your video, I'm pretty sure my water servo valve went out(not opeing up). my house get's cold water only, no error code but no hot water, and all pipes don't spew hot water. any idea how to get the servo valve working as it's not opening up and no water is able to go through to the tank. it is a 17 yr old tankless, thinking I should pay 1500 and just place it all

Thanks for the vid. We're having a problem with our R75-LSI. No hot water at all, no whine from the motor, no clicking... I am trying to make sure I order the correct part. Any thoughts on that would be appreciated.

Mike - Good video and a lot of good content. Keep it going. I have a question for you. What size Rennai unit do i need for a house with 5 baths and 2 half baths, laundry, and dishwasher. 4 People total living in house.

@TheBuddylab

3 жыл бұрын

Are you going to put it inside or outside and do you have natural or propane gas.

Thanks for the video. I'm 80 miles from the nearest road in the Alaska bush and the 75i stopped working. I thought it froze up but I find that unlikely. I shut off the inlet and outlet water valves, open up the two valves we use to drain the unit and blow through the hot water side, nothing, it's blocked. On startup the control panel doesn't light up and there is a buzzing like a stuck solenoid so that's why I suspect this valve. I'll let it warm up some more (it's inside but there is the exhaust pipe) and see if it drips and is frozen after all. Living in the bush I have to repair everything myself and your videos are a tremendous help! I never knew about that paper on the inside of the cover. Does this sound like a bad valve? Any suggestions? Thanks again

@ThatTanklessGuy Hi Frank, I’m in the process of doing this myself and I’m very hopeful that this finally fixes the problem (had issues for almost 5 years). I was wondering if there’s anything that could be done to prevent this from happening again? I know a water conditioner could be a solution but is there something simpler such as an inline sandtrap.

Hi Mike, are you answering questions here? Thank you 🙏

When flushing my RU80 my unit does not allow vinigar to be pumped through the exchanger. What valve do I need to disable or should I leave the unit on with gas off, or unit on and firing with a very low setting on the thermostat. Unable to flush.

Great u-tube, looking for Rinnhepumpkit-cr. Most dealers never heard of it. Where do I get a kit?

@TheBuddylab

3 жыл бұрын

Do you have a Ferguson supply near you. If not you can buy it through Rinnai’s on line store. Let me know how you make out.

Great vid. My rinnai has been surging hot cold every 1min and tech said the servo and bypass is the likely cause. But they said they have not seen this symptom without an error code. Have you ever seen this symptom?

@DS-td9lz

3 жыл бұрын

RL75/nat gas indoor. You can hear the burners kick in low and high mode every min when it surges. Already cleaned the fan and burners and flushed per your vids.

Question, I have an external unit and it works and heats water. My MC-91-2-s has voltage to it but no display. I replaced it and same issue. I connected both to a bench power supply and same issue. Should the controller have a display of any kind with just voltage to it, or is it an issue with the Rinnai water heater?

I HAVE A RL75I THAT IM HAVING ISSUE WITH SOME FAUCETS IN HOUSE NOT STARTING HEATER WORKS FINE OUT SIDE AT RELEIFE VALVE AS SOON AS YOU OPEN HEATER COMES ON DO YOU THINK ITS THE SERVO OR THE SENSOR?THANKS FOR VIDEOS THEY ARE GREAT!!!

@stevecox2324

3 жыл бұрын

I HAVE NOTICED THE FAUCETS THAT ARE GIVING ME ISSUES ARE ONE HANDLE FAUCETS KITCHEN AND SHOWER

@leviyoomoill7085

2 жыл бұрын

Hi, I saw your posting. Can you please feed me some info how you fixed your heater issue, I'm having same problem. Heater won't turn on on low faucets flow. Any info please.

How’s it, my tank(r53i) shut off and the fuses blew out. I replaced the fuses and the heater never turned on, both the control panel and water heater. Turn on hot water and the machine does nothing. I replaced the PC board, and still nothing. I’m going to check the turbine today. Never had any issues with this heater. Will the heater not show any sign of power if the turbine is malfunctioning? Confirmed power to the unit is good. Any advice is appreciated.

@ThatTanklessGuy

2 жыл бұрын

yes if the water flow turbine is cloged or bad it will not fire the tankless buy you may have a bad PC board. it will show signs of power to it but something might have burned out when the fuses blew. Mike

@Chuckscollections

2 жыл бұрын

@@ThatTanklessGuy mahalo for the reply. I just replaced the pc board and checked everything including the turbine. All looks good. I checked the power to the transformer and shows power, but the secondary/ output in the transformer only shows 4v coming out so I think it may be dead. The part is obsolete now apparently, I ordered a universal, 120vac/24vac. Will this work?

On a rl94e a code of 65 would this correct the problem? It's 10 years old.

I have a r75lse , it’s 12 years old. It has all of a sudden lost hot water pressure , it works ok from the kitchen faucet or bathroom vanity faucet unless you turn two faucets on at the same time. The bathtub and the shower has very low flow. The water is hot but no pressure ,,, I have flushed the tank several times but didn’t change anything ,, it’s giving no error codes Anyone have any ideas what I need to try next ??

Hello Mike . Have a very curious case with my Rinnai 98 RU When i have only one shower or bathtub hot tap running , the max temp i can get is 36 Celsius. If i open vanity hot tap at the same time, water temp at vanity is 52 Celsius and temp at shower drops to 29 degrees and all valves are located at the same level of the house .It is the same on all levels of my house. I reprogrammed my unit to max temp 140. For some inexplicable reason at 135 F and 140 F my unit is NOT firing at all and in use light NOT lit when there is demand for hot water. The max temp setting unit goes to work is 130 F. When I go and open bathtub hot water on main level and hot water at vanity in basement, story repeat itself. Small volume demand is super hot at 52 Celsius and big flow is only between 29-36 Celsius. Unit has been cleaned and descaled and i got water turbine spinned by compressed air from the bottom of servo valve when i took water filter assembly apart for cleaning . I suspect water servo valve turbine jamming ??? What is your vast repair experience tells you ? Thanks in advance for Your advice .Regards.

@CharlesLeo

6 ай бұрын

I have the same situation. I’m starting to suspect it’s this. You figure your issue out?

I have an RL75 with a code 65. Trouble guide says it's a bath fill function error. However, I don't have a bath filler. Does this still sound like a bad servo valve?

@ThatTanklessGuy

2 жыл бұрын

Yes it could be a bad or dirty servo valve

@jonathanansley350

Жыл бұрын

I have a RL94 and I don’t have the part number for it. Do you have a link for one?

Where is we can buy the parts

so i flushed tank, only a year old. after flush hot water intermitting. works with shower all the time, but sink u have to turn both on. could servo have a piece of sand or debri that is allowing servo to work intermittant. im going to back flush tommorow. any idea, no codes either

@TheBuddylab

Жыл бұрын

Did you remove snd clean the filter? If the shower works fine the units working. Check the aerator on the faucet for dirt. Mike

Question for u I just installed the RSC199in. At startup I noticed a pressure drop on the hot side that I haven't witnessed on past installations. It's not the plumbing bc it's all new and I isolated the tank from the plumbing and it does the same thing. I tested the pressure at the cold side service valves 85 psi and flows strong. Out of the hot side valve it flows strong for 2 seconds and then pressure cuts in half. Could this be the servo valve?

@TheBuddylab

Жыл бұрын

If you checked the incoming filter for debris and you checked the pressure at the service port and both are good then it could be the servo valve.

@jacobanthony3260

Жыл бұрын

​@TheBuddylab ya I did pressure is good at cold service valve. Hot side has good pressure when tested with gauge but dies when operating. Rinnai sending new servo valve thanks. Crazy thing is I just got finished with another rsc and same thing. I think Rinnai has a bad batch of servo valves down the pipe line. I have installed problems 30 of these RSC units no problems now get 2 in a row that where bought at the same time

Forgot to mention that unit does NOT showing any error code .....

I’m having trouble with loud groaning from my RUR199in. Thoughts?

@TheBuddylab

Жыл бұрын

It’s hard to say unless I was standing in front of it. Could be air pocket in the pump. How old is it and what gas type.

@DigZworld

Жыл бұрын

@@TheBuddylab it is 2.5 years old and a Natural gas unit. I’ve taken out and cleaned the filters and flushed the unit.

Mine is in a crawl space. I hope I never have to replace the servo. It will be a challenge just to flush it.

your tattoo's are too distracting and un-professional looking cover them up