Perfect video thanks. As an amateur I did this repair easily following this video, although I drilled out the rivets from inside drum, so any burs were on back of drum then just flattened them. Also I applied a little grease to the bearing plus the shaft, will now monitor it and grease up in maybe a few months.

@How-to-repair

3 ай бұрын

I'm not a firm fan of putting too much grease as this attracts dust and then sticks to it then becomes a grinding paste so I would use it cautiously although the part needs to be lubricated the bearing is made from phosphorus bronze which itself becomes a lubrication? I'm glad the video assisted you anyway. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZread superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @agmkporter9170 please remember to subscribe to our channel as that really helps us kzread.infoe432SAb2g08 Thanks, Paul 👍

Fantastic,comprehensive and well explained video, hopefully once my replacement parts arrive it will be as easy as you made it look. Many thanks.

good work! I watched your video for replacing the fan oven motor in my Neff oven. Spot on.

Thanks. In my case, only the rivet had broken. After watching this video, I solved my problem without changing the drum

@How-to-repair

2 жыл бұрын

Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you

You are life savers, excellent video, many thanks

Awesome repair !

Thanks! Excellent help!

Thank you, ours just fell to bits. I was going to drill/tap and put in a screw or something. Such a silly design. Ill try your method as can always repair in future easy.

@How-to-repair

Жыл бұрын

@AdamsWorlds please remember to subscribe to our channel as that really helps us kzread.infoe432SAb2g08 Thanks, Paul 👍

@hotpointbrownlover3365

Жыл бұрын

@@How-to-repair you could use this dryer for parts

As a quick temporary fix to enable use of the dryer whilst waiting for parts or service etc, I have in the past turned the key bearing around 180 degrees and drilled a new 3mm hole tapped with the original securing screw to hold the bearing in place. Then when you have the new parts put the new bearing back in it's original position.

@How-to-repair

9 жыл бұрын

now that's a clever idea

@spicystealth4285

3 жыл бұрын

AWSOME , just did this and worked perfectly as a temp repair , thanks

I tried the shaft replacement last week, it worked great, but I found it easier to drill the rivets out

@How-to-repair

9 жыл бұрын

The reason I grind the rivets of are so you do not cause Burs on the inside of the drum which can tear clothes when you use the dryer, this is the right way to do but drilling can be done but you need to file of any burs that you accidentally make other people have made videos on this but they don’t tell you to make sure there are no burs, glad you found it helpful. www.how-to-repair.com/tumble-dryer-spare-parts.html

You can drill through the rivets with a 5 to 5.5mm drill and the flange plate comes off easily.

These bearings wear out all the time. I have taken to applying a little silicone grease to the shaft as part of a bi yearly service

I have removed the water tank and it’s casing and now I’m struggling to put it back together have you a video how to please

I have Indesit IDCA 8350B. Do you have a kit for this one? Thanks

Does the bearing need to greased with high temp grease?

Will this work on modle tvfm70bgp(uk)

Merci!!! Thank you!!!!

Hello, I have a swan in need of this… the drum is the EXACT same as the one pictured and on the video. Will this be compatible?

Great video thanks for the advice. Any advice how to get the rivets out without a grinder please? I read somewhere you could drill them out?

@How-to-repair

Жыл бұрын

drill them. Thank you for leaving a comment this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

my hotpoint vtd20 has the same drum shaft as this one

sources I have a problem with drier I EMIT indication that purge the filter while the filter is clean what to blame in the second filter that has less I find the WET is normal HELP ME thanks. model is whirlpool azb 9772

Wheres the link for the kit ??

Will this work on tvhm80cp model? Thanks

@PedroJaimeObrien

3 ай бұрын

you can use this video for a hotpoint tvhm80c hotpoint fetv60cp

For bearing is better to buy kfl08 bearing system and install. Problem solved for ever!!!

mine was mounted from the inside with a hole for the shaft to go through, and threads in the drum. I feel sorry for those who bought this crappy version. Good solution though!

The dwum shaft? Welease Woger.

@stephensnell1379

5 жыл бұрын

john smith it's his way of talking

this repair is not worth doing just buy a new dryer

@How-to-repair

3 ай бұрын

If you have time on your hands, it is worth doing not everyone can afford to buy a new machine. That's why I made the video. It is a big job but it only takes about an hour and a half half.

@PedroJaimeObrien

3 ай бұрын

@@How-to-repair thanks for the info what will the tumble dryer do if the bearing shaft has worn away

@How-to-repair

3 ай бұрын

It will keep cutting into the chassis and eventually cut through the bearing shaft then it's knackered unless you replace the drum shaft kit

@PedroJaimeObrien

3 ай бұрын

@@How-to-repair can you please show this in an updated video