Quick vid on how I changed the blade on my miter saw
Жүктеу.....
Пікірлер: 31
@anthonypavlosky8661 Жыл бұрын
Hey, thank you for the video! Couldn’t find the blade stop pin . You pointed it out and I appreciate it.
@FranksCaliWoodSpecialty
Жыл бұрын
You're totally welcome! Thanks for the comment
@pacomarmolejos18699 ай бұрын
I put it on 1.75 speed & paused at 2:00 mark after I saw that I needed to start by loosening these two screws on name plate over the blade. Didn’t even need to take them out; just loosen the bottom one to free up this pivot point and when you loosen up the top one the nut cover will swing down and out your way. There’s a sliding bolt on the opposite side to lock the blade in place so you can crank on the nut w/o spinning the blade.
@FranksCaliWoodSpecialty
9 ай бұрын
I'll need to try that! Thanks for the comment.
@quickaccessdeliverynsw54004 жыл бұрын
Thanks, mate, I couldn't find the lock button on my c12rsh, it was tiny and thought it was a part of the construction, the manual picture and instructions were terrible in manual, I watch this and it solved my problem ,many thanks.
@FranksCaliWoodSpecialty
4 жыл бұрын
Awesome! And thanks for your comment.
@josiaspereira9847 ай бұрын
Thank you from Brazil!!!
@FranksCaliWoodSpecialty
7 ай бұрын
Wow! Thank you for visiting my channel.
@darrensegool6608 Жыл бұрын
Perfect tutorial. Cheers.
@FranksCaliWoodSpecialty
Жыл бұрын
Thanks!
@memccauley6610 ай бұрын
Thank you for posting this
@FranksCaliWoodSpecialty
10 ай бұрын
Absolutely! Thank you for the comment.
@dirkwizzard92473 жыл бұрын
FYI my Hitachi actually has the wrench installed on the machine so there’s no looking for a socket. It’s in the back of the machine by the adjustment for compound angles. Very handy. Nice video though. Good job thanks.👍🏼
@FranksCaliWoodSpecialty
3 жыл бұрын
What!... really? Lol I gotta check that out. Thanks!
@sherylW315 Жыл бұрын
Perfect! Thank you for this video
@FranksCaliWoodSpecialty
Жыл бұрын
Your very welcome, and thank you for the comment.
@leslievermazani90283 жыл бұрын
Thank you so much for making this video! I changed my saw blade!
@FranksCaliWoodSpecialty
3 жыл бұрын
Way to go! Im glad you found it helpful. And thanks for your comment 😁
@reidstoller5642 жыл бұрын
Saved me a lot of frustration!
@FranksCaliWoodSpecialty
2 жыл бұрын
I'm glad you found the video helpful. Thanks for your comment.
@drunkenmaster3893 ай бұрын
Thanks for the vid. Is that washer on both side of the blade removable? I bought the Metabo off the shelf and it didn't come with either washer. I think I need to order those.
@FranksCaliWoodSpecialty
3 ай бұрын
The washer should come with the miter saw. Thanks for the question.
@marcelausategui7006 Жыл бұрын
Hi..!, in the back there is a soccet tool that comes with the miter saw..!
@FranksCaliWoodSpecialty
Жыл бұрын
What? No way. I'm checking it later tonight.
@krsieck2 жыл бұрын
What size socket did you use?
@FranksCaliWoodSpecialty
2 жыл бұрын
You can use a 11/16" socket, a 17mm socket works better. Thanks for the question.
@shelleycataldo74713 жыл бұрын
how to attach the 375131 spring to the Hitachi c12rsh2
Пікірлер: 31
Hey, thank you for the video! Couldn’t find the blade stop pin . You pointed it out and I appreciate it.
@FranksCaliWoodSpecialty
Жыл бұрын
You're totally welcome! Thanks for the comment
I put it on 1.75 speed & paused at 2:00 mark after I saw that I needed to start by loosening these two screws on name plate over the blade. Didn’t even need to take them out; just loosen the bottom one to free up this pivot point and when you loosen up the top one the nut cover will swing down and out your way. There’s a sliding bolt on the opposite side to lock the blade in place so you can crank on the nut w/o spinning the blade.
@FranksCaliWoodSpecialty
9 ай бұрын
I'll need to try that! Thanks for the comment.
Thanks, mate, I couldn't find the lock button on my c12rsh, it was tiny and thought it was a part of the construction, the manual picture and instructions were terrible in manual, I watch this and it solved my problem ,many thanks.
@FranksCaliWoodSpecialty
4 жыл бұрын
Awesome! And thanks for your comment.
Thank you from Brazil!!!
@FranksCaliWoodSpecialty
7 ай бұрын
Wow! Thank you for visiting my channel.
Perfect tutorial. Cheers.
@FranksCaliWoodSpecialty
Жыл бұрын
Thanks!
Thank you for posting this
@FranksCaliWoodSpecialty
10 ай бұрын
Absolutely! Thank you for the comment.
FYI my Hitachi actually has the wrench installed on the machine so there’s no looking for a socket. It’s in the back of the machine by the adjustment for compound angles. Very handy. Nice video though. Good job thanks.👍🏼
@FranksCaliWoodSpecialty
3 жыл бұрын
What!... really? Lol I gotta check that out. Thanks!
Perfect! Thank you for this video
@FranksCaliWoodSpecialty
Жыл бұрын
Your very welcome, and thank you for the comment.
Thank you so much for making this video! I changed my saw blade!
@FranksCaliWoodSpecialty
3 жыл бұрын
Way to go! Im glad you found it helpful. And thanks for your comment 😁
Saved me a lot of frustration!
@FranksCaliWoodSpecialty
2 жыл бұрын
I'm glad you found the video helpful. Thanks for your comment.
Thanks for the vid. Is that washer on both side of the blade removable? I bought the Metabo off the shelf and it didn't come with either washer. I think I need to order those.
@FranksCaliWoodSpecialty
3 ай бұрын
The washer should come with the miter saw. Thanks for the question.
Hi..!, in the back there is a soccet tool that comes with the miter saw..!
@FranksCaliWoodSpecialty
Жыл бұрын
What? No way. I'm checking it later tonight.
What size socket did you use?
@FranksCaliWoodSpecialty
2 жыл бұрын
You can use a 11/16" socket, a 17mm socket works better. Thanks for the question.
how to attach the 375131 spring to the Hitachi c12rsh2
@FranksCaliWoodSpecialty
3 жыл бұрын
Hi! I'm not sure, I have not had to replace it.