Пікірлер

• 
  @CarlosAguilar-cu2ek6 күн бұрын

  Bechisssssssssima cutting board

• 
  @FranksCaliWoodSpecialty5 күн бұрын

  @@CarlosAguilar-cu2ek Thank you

• 
  @jorge822887 күн бұрын

  Hello i need one like this how can i contact you thanks

• 
  @FranksCaliWoodSpecialty7 күн бұрын

  @jorge82288 Hi, thanks. [email protected]

• 
  @2LoudTech9 күн бұрын

  Can we get an update video my boy? ✌️

• 
  @FranksCaliWoodSpecialty7 күн бұрын

  @2LoudTech A lot of you have been asking... I might just put an update vid soon! Thanks

• 
  @omenhuizar779715 күн бұрын

  How long does the battery last?

• 
  @FranksCaliWoodSpecialty7 күн бұрын

  @omenhuizar7797 Thanks for the question, I've used it a couple times on full blast mode all day, and the battery kept going. So, I can safely say all day.

• 
  @dancascino70119 күн бұрын

  Hi, just stumbled onto your build video, very nice. I have a couple of questions.( mostly about the doors). are the door made of 1x4's or another species. also what ( type if insert) did you use to create the illusion of a barn door. I am in the early stages of a wall of garage cabinets and my wife wants a similar look for our doors. And lastly hinges, i noticed you used only 4 , are the doors 8' (mine are). Have you had any issues with them staying rigid or warping at all. Thanks for any insight.

• 
  @FranksCaliWoodSpecialty7 күн бұрын

  @dancascino701 Hi- Thanks for checking out my build video. Yes, I went with 1x4s for the door frames. The inserts (diagonal pieces), which give it the barn door effect, are also 1x4s that were planned down to be less thick. In addition to its appearance, they help to add rigidity to the doors. Lastly, the doors are actually not that heavy, and the existing hinges provide ample support.

• 
  @FranksCaliWoodSpecialty7 күн бұрын

  @@dancascino701 good luck on your build!

• 
  @joseofno19 күн бұрын

  Shes too cute, and happy to help i can't wait to have my own little assistant 🥰😍

• 
  @FranksCaliWoodSpecialty7 күн бұрын

  @@joseofno thank you. She's the most helpful person I know.

• 
  @JudeTheDood24 күн бұрын

  How are the taillights holding up? I was thinking of buying them but I’ve seen reviews of them not working after only a few months

• 
  @FranksCaliWoodSpecialty7 күн бұрын

  @@JudeTheDood I've read a lot of comments about like this. I had no issues whatsoever. I'll post an update video soon.

• 
  @JudeTheDood7 күн бұрын

  @@FranksCaliWoodSpecialty Awesome! Looking forward to it!

• 
  @FTroop37F26 күн бұрын

  Nice job. What software helped you with the design?

• 
  @prodbykaioken27 күн бұрын

  What’s the tune of the box 10hz 😅

• 
  @KingJamie2229Ай бұрын

  😮 That's a shame you have to cover up all that, It's a work of art!

• 
  @FranksCaliWoodSpecialty26 күн бұрын

  @KingJamie2229 I know, right! Thanks for the comment.

• 
  @josevicencio4095Ай бұрын

  Can you send me the information on how you build it

• 
  @dannyg652Ай бұрын

  Good agit brother!! What speakers are you running for the.mids and highs?

• 
  @inseasonandoutofseasonАй бұрын

  having some measurements would be nice

• 
  @FranksCaliWoodSpecialtyАй бұрын

  Yeah, I agree. I didn't use any plans. I winged it.

• 
  @JerryChavez-es7bhАй бұрын

  Did u get hyperflashing from LED conversion ?

• 
  @FranksCaliWoodSpecialtyАй бұрын

  Thanks for the question. Nope, no lighting issues at all. Everything works as intended. I might make an Update video to show all the new lighting I've installed to show that it all still works perfectly.

• 
  @soundguy1031Ай бұрын

  What would the box be tuned to?

• 
  @mtcoiner79942 ай бұрын

  I built a large box for my home theater system. I placed within the exact same SKAR ix 8 subwoofer. Fantastic sound for the money. The key with these budget subs is to never over power them. If you give them just enough, they sound great and last a long time. A good box is also very important.

• 
  @FranksCaliWoodSpecialty2 ай бұрын

  Awesome! And yes, I 100 percent agree that you need a well-designed enclosure.

• 
  @onesikm32 ай бұрын

  Hey can you make me a single 12” box for my car ? Are you in California ?

• 
  @user-fx3fu1nc1r2 ай бұрын

  Is that smooth jazz

• 
  @FranksCaliWoodSpecialtyАй бұрын

  Yes! It's great background music while I work.

• 
  @juniorink.jr.2 ай бұрын

  Its amazing, good job man 👏👏👍💖

• 
  @FranksCaliWoodSpecialtyАй бұрын

  Thank you for the comment.

• 
  @tonypowell75292 ай бұрын

  Lovely job

• 
  @FranksCaliWoodSpecialtyАй бұрын

  Thank you for the comment.

• 
  @patrickszuba29512 ай бұрын

  YOU should make all the "how to videos." You showed exactly what to press to get that wire connection apart.

• 
  @FranksCaliWoodSpecialty2 ай бұрын

  Thanks for the comment. I'm glad you found it helpful.

• 
  @UserUser-ke4ti2 ай бұрын

  Excellent job there Cali, I have just built a tool cabinet that is 8x4x15 , mondo cabinet, just barely fits in the garage. The only difference between yours and mine is I used all wood and glue, no screws or nails, even the hinges are wood, I did put steel casters for easy use, I love to see more of what you've got.

• 
  @FranksCaliWoodSpecialty2 ай бұрын

  Thank you for the kind comment. Your cabinet sounds like an amazing build. You even used wooden hinges? Wow.

• 
  @geogmz82772 ай бұрын

  Lmao! Who had Hector Acosta Bachata playing on the background at the end? 😂

• 
  @FranksCaliWoodSpecialty2 ай бұрын

  🙋‍♂️

• 
  @Alexusex2 ай бұрын

  Очень хорошо. Вопрос, как будешь проводить обслуживание источника питания, или усилителя звука?

• 
  @russgladstone4322 ай бұрын

  Where’s the BASS ??? At least one Sub and a Bass reflex port surely !!!!

• 
  @FranksCaliWoodSpecialty2 ай бұрын

  Good question. The Amp setting is set to Full Range, so the speakers put out a decent amount of bass. I considered putting in a sub, but it would simply pull so much power that it would drain the battery much quicker. Who knows maybe if I build another one, I'll put in a pair of passive radiators for some increased bass effect.

• 
  @brightondude93272 ай бұрын

  That's very nice and perfect for parades etc.

• 
  @FranksCaliWoodSpecialty2 ай бұрын

  Yes, you can take it to a variety of places. Thanks for the comment.

• 
  @artyfarty872 ай бұрын

  That's pretty cool Bro. 😎👌

• 
  @FranksCaliWoodSpecialty2 ай бұрын

  Thank you for the comment

• 
  @charac1892 ай бұрын

  Wait a min…soo you mean to tell that I don’t need the switch?? I can just use the headlight? As if the headlight go on the fog do too?…or am I missing something?

• 
  @FranksCaliWoodSpecialty2 ай бұрын

  That's exactly 💯% correct. You use your existing oem headlight switch. You're simply tapping into the headlight wiring using the plug n play harness. Whenever your headlights turn on, your foglights will turn on too. Thanks for the question.

• 
  @martinquerubin29702 ай бұрын

  Can I use that box for my 10" kicker compVR

• 
  @mitchcobarrubias59442 ай бұрын

  Frank I'm a little confused on the 250500 you say you installed. Here is what it says:250500-This harness will simply allow the fog lights to come on at night and remain on when the high beams are on. The fog lights will not be on during the day unless you manually turn on your headlight switch. So do they stay on when the regular lights are on by auto such as night?

• 
  @FranksCaliWoodSpecialty2 ай бұрын

  Thanks for the question. Yes, the foglights will automatically turn on anytime the headlights turn on. So they'll come on when the headlights turn on at night or if you manually turn them on with the switch.

• 
  @AudioHiFiCM3 ай бұрын

  Nice!👍🏻

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  Thanks

• 
  @joseluisrodriguezrosario21163 ай бұрын

  I need the dimensions on a speaker box 10 in woofers on a 2002 toyota tacoma four-door

• 
  @frederickkwek37723 ай бұрын

  Nice deep bass.....appreciate your video

• 
  @flaviomaia53773 ай бұрын

  Humans and their thirst for bass.

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  😆 It's never enough!

• 
  @omarperez54263 ай бұрын

  Chingon

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  Thank you

• 
  @Hatya053 ай бұрын

  Nice work

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  I appreciate your comment. Thank you

• 
  @daytonpotter23593 ай бұрын

  And definitely dont drop the washer. unless you want to open up the dust collection to go after it

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  I think we've all dropped it once or twice 😄

• 
  @theAZbassassin3 ай бұрын

  Those onyx black? Or cyber black? I know this videos is over a year old but thought I’d ask! Thanks

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  Thanks for the question. According to the product description, it says onyx black.

• 
  @gabrielq.98253 ай бұрын

  Ground to new ground cable or green screw?

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  Green screw if I remember correctly. Thanks for the question.

• 
  @sanlukas13913 ай бұрын

  Can we get all the exact measurements to build one ?

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  Yeah, the measurements are shown at the beginning of the video. If you pause it, you should be able to see it.

• 
  @user-el1wr7fy7i3 ай бұрын

  Poor music choice

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  It's just a matter of taste. What's your music preference?

• 
  @ericbelmonte74413 ай бұрын

  Congratulations. Excellent workmanship. The secret to having a deep quality bass sound is in the distance between source and outlet. Hence the labyrinth. What would also greatly help is lining the interior of the box with absorbent material, I've, old blankets or foam sponge. Best regards Eric

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  Right on! Thanks for the comment and your input.

• 
  @drunkenmaster3893 ай бұрын

  Thanks for the vid. Is that washer on both side of the blade removable? I bought the Metabo off the shelf and it didn't come with either washer. I think I need to order those.

• 
  @FranksCaliWoodSpecialty3 ай бұрын

  The washer should come with the miter saw. Thanks for the question.

• 
  @smokedog10273574 ай бұрын

  Yooo…2--15s ? Wanna build and ship..

• 
  @manuelceballos13524 ай бұрын

  put. inside the box a cross over. it would give you a better sound

• 
  @GRAAmusic4 ай бұрын

  Well Done sir

• 
  @FranksCaliWoodSpecialty4 ай бұрын

  Thank you for the comment.

• 
  @Jaaaap4 ай бұрын

  Quick question - What would you change in the design if you'd have a 10 inch sub? Amazing video bytheway!

• 
  @FranksCaliWoodSpecialty4 ай бұрын

  Oh boy, that's a loaded question. It would require a whole new set of calculations. Larger chamber for sure to name the first change.

• 
  @justingonzalez7024 ай бұрын

  This was about as good of a custom box as I've ever seen anyone do as a home project. But i can only imagine how much better it would sound if it had been built for a different sub.

• 
  @Tierone13374 ай бұрын

  This is all looks not sound quality . No calculations

• 
  @FranksCaliWoodSpecialty4 ай бұрын

  All done offline. I purposely left out the boring stuff. As for sound quality... you'll need to personally hear it to believe it. Thanks for the comment.

• 
  @ribeiro6174 ай бұрын

  For the doors, what are the frames made from? I’m assuming it’s not plywood. Is it 1” x 4”’s??

• 
  @FranksCaliWoodSpecialty4 ай бұрын

  Right, I used pine for the door frames. You can see that right around the 6min mark. Thanks for the question.