Brilliant. You get to the point unlike other KZreadrs who spent 30 minutes talking about themselves, promoting something or both. You saved me a lot of time and money thank you.

@JasonSipe16

Жыл бұрын

I agree--this is great. The KZread "gurus" tell content creators like me to do all of this self-promo BS, but I think those of us in the fix-it, tools content areas do better just getting right to the point. Nobody got time for that! Thanks for the video, Steve!

@keithtag1

2 ай бұрын

Kinda like yourself.

I just purchased a heating element for my whirlpool dryer. The part was the delivered the next day. I must say after watching your video the repair process was a success. I'm a single woman and I did it! Total cost was less than $60. Thank you so much

@partselect

10 жыл бұрын

You're welcome and let me be the first to officially announce that you're now a DIY'er! :)

I cannot express how easy you made this, describing each step. the testing, then the replacement - this video helped me to replace my heating element in 10 minutes. I do have a different model, but the mechanics of it were very similar. THANK YOU!!!!

OK, I am just blown away (in a very good way) by your tutorials, and parts replacement service. I have used your tutorials before, but purchased the part locally. This time, I purchased the part thru Partselect.. I ordered the part yesterday at 2:29 and had the part delivered to my home and installed before 2:29 today!! Also, you responded to my issue regarding a different configuration. I don't typically write reviews, but in your case, I am. EXCELLENT service and tutorials! Thank you!

I have had to use this video twice and it was effective both times. Straight to the point with clear, concise instructions on how to replace the heating element. It may be a decade year old now (as of 7/3/2021), but I will still come back to it if I need it again. Thank you!

@ezrahurd6841

5 ай бұрын

I just used this again 1/30/24 and it still holds up. So glad this video is here. It took me 5 mins to do this and saved me so much money too. Whew!

Thank you. I was ready to just go buy a new dryer. My son and I used your video and presto my trusty dusty is drying again. Thanks

$34.99 element parts off amazon and this awesome video, it was so easy! Thank you for your clear and thorough instructions!! Very much appreciated!!!

Whew you made it so easy. I just did our Whirlpool dryer that is not heating up. I watched this first and along the way to replacing the heating element and after 30 minutes our dryer is in full use. Thank you Sir for saving us money.

Ordered parts from PartSelect! Replaced the heating elements and thermal Fuse in no time. Drying running again like new. Your videos helped a lot. I was just surprised when the credit card I used for the purchase showed "FOREIGN FINANCIAL CHARGE" for the ordered parts. All along I thought the purchase was in the US. The amount was not much, not that of a big deal.

THIS video saved my pockets a good $600. My boyfriend wanted to get rid of a dryer that is 3 years old because of a power surge. Well, after changing the thermostat, heating element and thermal fuse, my dryer works like brand new!!! Thanks much!!!

Firstly, this video is AMAZING!!my dryer wasn’t heating anymore and I googled found this video and ordered the parts, I literally changed out 5 parts on the back of my dryer by clicking on a few of his other videos. This video is easy to follow and my dryer is fixed and actually is getting hotter then it was before and now takes 1 time full cycle to dry a full load compared to before it took us turning on 2-3 more times.

That really was easy to do! I'm a merchant marine and we have industrial size dryers which are a huge pain to replace. Wish they were all as easy as this. Thanks!

$30 element off Ebay and this video, it was so easy!! Thank you for your clear and thorough instructions!! Very much appreciated!!!

Your videos are always great. I replaced a thermostat last year with your help and this year you helped me be sure I had put the wires back in the right place when replacing the heating element as I foolishly pulled everything out in an angry rush without paying proper attention. Go me! But I remembered your videos and thanks to this one I got everything in the right places. Thank you very much!

@partselect

10 жыл бұрын

Thanks for sharing and we're happy we could help!

@colettemcwilliams1325

7 ай бұрын

Take a picture before you remove the wires.

Your video was very easy to understand & did not wander off-topic like other videos I’ve seen on KZread. I was able to fix my dryer after watching your video! Thanks!

Your video helped SO MUCH! I repaired my dryer today (which made a lot of people 'eat their words' because I am a young female) and it works great :) thanks again!!!

i just wanted to thank you for this video. this is by far one of the best how to videos I've ever come across, great pace , soothing and clear narrative, and the low background music was also a fantastic touch . my husband works out of town majority of time and he usually does all the fixings ,but thanks to this video not only am I going to save us $200 (repair man fee) but I'm going to save my husband the hassle so he can relax . I hope all goes well , thanks again

Thanks for posting!! My elements went out yesterday and up and running again tonight! I will keep u guys in mind if I need to buy parts again!!! YOU ARE THE MAN!!!!!

This video did not give me stress I understood everything. You were direct to the point with out added useless information on your personal life or the history of dryers.

Subscribed after watching. Got straight to the nitty gritty and no filler, simple yet concise step by step breakdown and explanation and to the point, helped me tremendously, thank you!

Thank you for your video. I was able to change the heating element and my dryer works better than ever.

Thank you. I watched too many videos on how to replace a heating element, yours is the one that helped.

Great video! You were able to help me with my repair. The instructions I received via the replacement part were horrible. Watching this video assisted me with everything I needed to know. You saved me a lot of money and I thank you very much!

Thanks for the information. It looks so easy, I think I'll have my wife replace it for me. Repairs go better when you use your Snap-On ratcheting screw driver too. 👍🏻 Great video, short yet informative & to the point. You were spot on & spoke clearly. No animals or music to distract from the repair. Your knowledge & your time are greatly appreciated. Thank you.

This tutorial is a piece of art. Incredible!!

Man whata life saver. I was about to go out and buy a whole new washer and dryer set! I hate fixing things but this just seems so easy. Thanks a billion!

Haven't received my part yet but I'll circle back.. Looked easy and no B.S... Thanks..

Thank you for this video! I ordered the heater element from your website and installed it myself using this video! You guys are great!

You just saved me 500+ dollars on a new dryer. Thanks.

Thank you for all your help that was very simple and easy to do now I won't have to pay a fortune to have somebody do it

Just successfully replaced the element in my dryer. Your video was great: simple, easy-to-follow. Bought the new element from an outlet, plus a 1/4" nut driver for ~ $40 total. So I did not have to buy a new $400 / $500 dryer ... Thanks again.

Just saved some $. Thanks! Was about to toss the dryer and thought I'd give this a try first. Seems to have done the trick. Thanks!

May 13th, 2021- Thanks to your video, I sorted out the HE replaced with new HE. Thank you for your guidance & sharing the information ^.^

EXCELLENT video sir. Thank You !!

Thanks for the visual help! Great video.

You have NO idea how much money you just saved me! Thank you!! This calls for a subscription!

I saved so much money doing this myself. And you get right to the point, thank you.

turns out after i tested the element it was good, i then moved on and tested the thermostat switch just above the element. it indeed was blown. replaced both upper and lower thermostat parts "i forgot the actual names of the parts" but success! works perfect and i made sure to clean everything up check the exhaust line etc..your video made this possible!

Thank you!! Your directions were so helpful

Omg u saved me. My heating element had a broken coil!!!!! Thanks so much!!!!

Thank you! Removing the thermostat wasn't entirely clear from this video, so thanks for having a separate video for replacing that, making this project a snap. My wife is very surprised I was able to do this.

@partselect

9 жыл бұрын

BradleyMalfoy Glad we could help you with your repair AND impressing your wife!

Great video! Repaired my dryer easily, One caveat though: be careful where you grip the back panel when removing it or putting it back on! Being a smaller person, when I was putting the metal back panel on I reached down to lift it up and instead of lifting it from the bottom, I put my hand onto the vents cut into the back. I didn't realize it was unfinished metal and it was razor sharp! Sliced three fingers badly (lots of blood). Be careful and stay away from those vents!

@riverchaser9175

5 жыл бұрын

I appreciate this warning, thanks!

👒 off Sr. You're the best, very simple and practical, here some technical ask you for $$$$ problem is very easy. Thank you sr

This is really a great help! Made it super easy to change the heating element on my own. I am so appreciative!!!

Thank you. You are the best at explaining.

Thank you I just fixed our dyer today while my husband already planing to get another one ☝️

Your the best, clear and concise.

Great video, was able to do my own repair and saved a fortune...

Thanks a million, our dryer is good to go now!

This video was very helpful, thank you. I tested my thermostats and they are fine. It's the heating terminals (white part) that appear to be bad. Does that mean the whole heating element needs to be changed? It seems like the white terminals are not removable from the housing. I have a Whirlpool Gold Ultimate Care II dryer. Thank you for any advice you can offer.

Thank you for this great video. Watched it before to repair my dryer with success. Wish to add that my unit did not have the door compartment (2:26) for the heater element that required to be replaced. Instead the entire element housing and vertical (grandfather clock style) cabinet was friction fit inside the dryer and was resting on 2 x fangs at the bottom. After bending a bit the topside compression clip, the entire assembly was in my hands. Then removed a screw at the bottom of this cage and could then access the defective element. Recently noted that the dryer is taking 2-3x longer to heat yet have ample heat and air flow. Almost burnt my hands touching the back dryer wall. That was a hint. Took it apart and found the heater element cage fell out of its tracks was leaning against the lint cage. That is, could see my wet clothes through the hot air hole that was now visible. Just fixed it again - secret is to be 100% sure that the TOP compression clip is locked into the slot on the heater element cage. Now I think I can hang off the unit and it should not move. If you do not do this, the cage will come off its 2 fangs at the bottom and will fail to dry your clothes. Thanks for your videos - learning a great deal.

Awesome video!!! Im definitely cancelling my appointment for repair man to come out and replace the heating element on my dryer! Now I have 80$ back in my pocket.

Thanks, mine is slightly different, so you disconnect the terminals and leave the thermostat attached until afterwards, then disconnect and install to the new one. Otherwise it's pretty 1 to 1. Thank you for the visual assist! Helped a ton.

great video.... My heating element was fine but the air duct behind the dryer has a hole in it.. We have to dry the clothes twice more time than we usually have to. Could that be the issue?

Great repair video. Clean, clear and straight to the point. Is there another video associated with this one, that describes how to determine when the heating element does not work?

Terrific video. Thanks for putting it together.

U know I was able to do it fairly quickly, I'm very proud of myself. The video was very helpful, thank u.

Any video or advice to change the element in a one piece stack? Ours doesn’t have the separate bottom. We got it off and element in but can’t get the hidden screw back in because of the spring load of the element.

Thank you! Extremely helpful!

Very simple and to the point. THANKS

Thank you! Works like a charm now.

Thank you! I was able to replace mine with your help.

@PeterMarinacci

9 жыл бұрын

Did that a while back...

Very helpful and confidence-improving video.

I have a Roper electric dryer everything seems to check out okay how do I see if the timer is bad?

Hi Steve. Any tips on testing the high limit thermostat and belts for my Inglis dryer. No power. Not the breaker and I changed the thermal fuse this morning with no luck. Thanks for any help you can provide. Love the videos!

Thanks! This worked!

Mine went out yesterday. It doesn’t dry anymore. Some friends mention it was the heater element. This is a old dryer. Don’t lnow where to look for the part. Any suggestions ?

Thanks sooo much. This video was a BIG help..You saved me the repair man costs. Once again Thanks.

I subscribe to your channel I like how you get to the point and get it a very calm Manner Thank you for posting this video

Great video Steve.😀

Thank you made fixing my dryer super easy

TIP: Do your best to not touch the heating filaments. The oils on your hands will cause the filaments where you touched it to burn out more quickly. The heating element will last much longer if you can avoid touching any filaments.

@Purelight-

2 жыл бұрын

Which part is that

@byronlaw6724

2 жыл бұрын

@@Purelight- It's like a coiled wire.

@Purelight-

2 жыл бұрын

@@byronlaw6724 oh the roles of wires on the bottom of it?

@byronlaw6724

2 жыл бұрын

@@Purelight- yep.

@mattspurrell6572

3 ай бұрын

Thanks man

When you take the heating element off should i check it for broken wires or how do you know its bad

What is the brand of the 1/4 driver? I really like how it sounds.

Hi Denise, Thanks for your question! Can you provide your model number? It will better help me to troubleshoot with you. Is the dryer presenting any other symptoms, apart from taking a very long time to dry clothes? Thanks again!

I have a question how do you know if it’s the right size or part for the Whirlpool dryer I have?

Have a question, when I went to check my element due to no heat there was only one wire connected on the 2 bottom prongs not 2 and didn't see any loose wire, can I try the connected wire on the empty prong?

Thank you for this video!

I have a frigidaire stack dryer it takes for ever to dry, it does not heat enough, what could it be

Thanks for do this video. Well first part of this week the dryer heating element went out. I looked back when we last replace the heating element. It was back on Feb. 2010. I had a guy come out and replace the element. The Guinco tech charged me $294.71. This time I looked on youtube saw a how to video and repaired the part I purchased off eBay for $17.95 made in the USA and tax fee with Free priority shipping. The dryer we purchased when we moved to Cedar Hill in 2000. Savings $276.76!

Great video! Thanks!

Great video, thanks! Our dryer is taking forever to dry clothes. I've checked the hose it is clear. Dryer is about 12 years old, very similar to the one in your video, no bells or whistles :) Heating element??? Thanks for any guidance. mdg

Fantastic video!!!

This guy is pretty good! Helped me out!

Question: turned on the dryer one night and the next morning discovered it was still running and no heat. Also there wasnt a vent outside the house (in process of fixing). Does that sound like the high limit thermostat or heatong element?

Outstanding video, really helpful.

@partselect

10 жыл бұрын

Thank you for the compliment!

Huge help thanks!

You made this so simple for me!

How can you test to see if the element is working or not and that it's not one of the other failure points like the thermostat or the fuse

Thanks used this video to repair my whirlpool dryer.

Great video. Thanks

Great Video . Thank you so much....

what if my dryer is too hot. the back, door inside and top of my dryer are so hot. and my dryer is only 3 years old. I took apart the dryer cleaned out the whole lint trap all the way to the outside. what else could be the problem. I'm still ordering the heating element and thermostat because I do believe it might be that giving me signs. just a hunch

Hiw do you tell if it's this or something else? Every thing works on ours except the heat (and i think the timer thing isn't counting down either) I has resistance in the element of like 10 ohms which seems pretty high. I think that way it isn't working to much resistance

I've replaced the thermostats, and fuse....still no heat so now I'm gonna replace the element . How do I check to see if it's bad ??

What type of tool are you using to unscrew the screws?

Thanks A Million My Boy !!!! DONE✅

how do i get a hold of the star key to take the screws off the back?

Excellent video! My dryer was similar enough, and fixed it easily! This saved me so much time!

#Give thanks. Thank you. You saved me some time and money and scrapped knuckles. Have a great Thanksgiving.