How to replace a headlight - 2015 Hyundai Sonata Headlight Replacement
Автокөліктер мен көлік құралдары
How to replace a headlight housing assembly on a 2015 Hyundai Sonata. Replacing the headlight assembly on my 2015 Hyundai Sonata is relatively simple, just need a few tools.
Tool list: 10mm & 12mm socket, ratchet (preferably 1/4 drive), Philips screwdriver, Trim panel tool, Flat head screwdriver
This Tekton 1/4 drive kit should include most of the above listed tools: amzn.to/3EerBYA
Trim panel tools: amzn.to/3DOTLrF
Screwdriver set: amzn.to/3WOnYjh
I purchased these headlights from Headlights Depot: www.headlightsdepot.com/headl...
00:25 - remove trim fasteners
01:52 - remove screws from fender liner
02:44 - remove screws from under front bumper
05:00 - pop bumper cover loose to access remaining bolts
05:36 - remove remaining 10mm bolts
06:20 - remove plugs and headlight housing
07:19 - install new headlight housing
08:09 - reinstall bolts attaching headlight housing to car
09:09 - push bumper cover back into position
10:10 - reinstall screws in the reverse order
10:45 - switch to passenger side
14:35 - reinstall 10mm bolts under valance/bumper
#headlight #headlights #diy #howto #hyundai #sonata #carrepair #automotive
Hyundai Sonata seventh gen LF 2014 - 2018 model years.
Пікірлер: 19
Thank you for this. Helped me expedite a replacement for my step kids 2016 Sonata after she ran into the rear of my lifted Ram. Somehow, someway I got stuck with this task.
Just got 2017 Sonata and replaced bulbs but still don't get enough lighting. This is my next step I believe my projectors are burned out. Thanks for the video. Just subscribed.
Been trying to change bulbs. This is the only way i see that will work
Great vid thank you
You can remove the plastic head light cover off from the assembly to clean them inside and out or buy new plastic covers
@brenth7774
2 жыл бұрын
yes, I did that first however, there were multiple things broken inside including the adjusters, tabs etc. I ended up just replacing them after removing the covers once before.
@corymichael2583
10 ай бұрын
Finding the headlight cover was more of a challenge than replacing the entire assembly.
@trvman1
9 ай бұрын
Did you have to go thru all of this also to replace the headlight covers? How hard was that? Mine just need covers replaced.
Best and speedy!
This is unreal!! Have to go thru all that to change out the headlights. I bet a dealer will charge you at least 100 bucks if not more in labor alone.
Steel toes Crocs?
EXCELLENT
I did this for my drivers side headlight and now my blinker on that side won’t blink. The bulb comes on but it’s not blinking and it clicks really fast on the inside like it’s blown but it’s not. Any idea how to fix that? It was blinking fine before I did this.
@brenth7774
Жыл бұрын
I would check the bulbs and all connections. It is possible that the assembly is defective if you bought it from somewhere. I think you could possibly plug it into the other side harness to check if it works there.
Where did get your new headlights from.
@brenth7774
2 жыл бұрын
I got them from here: www.headlightsdepot.com/ - I first tried an eBay set however, those were jacked up. The ones from headlights depot both fit and worked perfectly like OEM.
Do you have to calibrate the head lights?
@GR-bh5ql
9 ай бұрын
Most likely yes. There is a Philips screw that rotates wheel with teeth on the back side of the headlight. Clockwise makes beam up, counterclock makes beam down. Look for the tutorial how far it should be to not blind opposite drivers.
Too dark