How To Replace A Crossmember or Subframe with Basic Tools Part 1
Автокөліктер мен көлік құралдары
I have to admit, I thought this job would be quite difficult. The subframe (or crossmember) is quite large, there are a number of parts to remove and I'm working in a small 200 sq.ft. garage in the middle of winter. Surprisingly, it was quite straight forward and logical. Just take your time, label everything and you'll be successful!
► Subscribe: / carsntoys
►► Tools and Supplies:
www.amazon.com/shop/carsntoys
Engine Support Bar: amzn.to/34A3EXW
►►► Our most helpful videos (One million + playlist): • 1 Million Views Playlist
Parts removed / steps on driver and passenger side:
- Both front wheels and tires
- Rotor screws; if applicable
- Lower caliper bolt and safely suspend the caliper
- Caliper bracket
- Rotor
- Axle nut
- Steering tie rod
- Upper and lower ball joint
- Steering knuckle
- Front exhaust pipe
- Lower strut mount
- Lower control arm
- - - Install support bar - - -
- Bolts holding steering rack to subframe
- Transmission shift cable
- Engine and transmission mounts
- - - - Place floor jack under subframe with a large piece of wood - - -
- Remove subframe bolts and brackets
- Remove subframe by slowly lowering the floor jack
Music:
EDM Tropical House:
/ free-background-music-...
Roman Muller - Maldives
/ roman-muller-maldives-...
Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
/ carsntoys
#crossmember #subframe
Пікірлер: 98
What I really like about your videos is that you're doing it like the rest of us: no lift, no heated garage, and you actually show your mistakes. Thank you so much
@CarsNToys
Жыл бұрын
Thank you, Sabroso! Truly appreciate the feedback.
@emmanuelquinones2260
4 ай бұрын
@@CarsNToysthats a weak comment for someone that gave you $10. by the way ,where did you get the engine support bar? Please share link
@CarsNToys
4 ай бұрын
Why do you say that? A link for the engine support bar is in the video description.
I have to tell you how impressed I am with this video. Great job with the lighting and camera angles, and I appreciate your thoroughness. Will be subscribing and sharing.
Very informative and competent explanation. I have to replace the subframe on the wife's Nissan Note this week.
You are definitely an expert in this field. Very professionally put together great communication skills too. Thanks.....this was very informative.
@CarsNToys
4 жыл бұрын
Thank you. Happy to help.
Good video. I will be doing this to my rusted Honda Accord soon. Thanks for the video.
@CarsNToys
2 жыл бұрын
Glad it helped
Hey man great video! Can you give any tips on how you took off the bolts that connect the steering rack to the subframe?
Great video very educational thank you!
Great video! I have to do this on my 2019 C300, I wish I knew someone as professional and precise as you to work on my car.
who wouldve thought id be looking for a video like this. Great job appreciate the insight!!!
Did you have to remove the shift cable? If so how? It shows in your video that it was in the way when you were lowering the subframe but then just jumps to you removing it with out showing how you took of the shift cable.
So if I wanted to drop a J35 in my base model I'd need the type S sud frame? And wiring harness (s) and type S cluster?
great video i have to replace rear crossmeber on my 08 rav4 you think i going to be able to do it in my garage with my regular tools
Hey man, i need to lower the subframe on the same car (CL9) to fit my header from my k20. It almost fits but the subframe is in the way. I was going to beat it with a hammer but I rather drop it. Is there an easier way?
I have a 2008 dodge avenger and I'm getting my subframe crossmember replaced. Do you have to remove the lower ball joints for the subframe to come out?
What are the bolts called that hold up the subframe? The bolts that are right next to the lower front control arm.
My 2011 Taurus hit a train track and the subframe is shredded in a 2” by 4” area. Just a big hole. Instead of that engine bracket you used, would some blocks be just as effective?
How come the sub is alu? I suppose it's a super strong alloy like t6000 or something? I see to jack a car the sub-frame is used as a safe structure: this is how I got here, wondering how "safe" it is.
I have 06 lowered accord. I slightly hit a curb and bent the front passenger side mounting point where the tow hook / mounting point is located. Only damage I noticed is that it bent the from corner downward a bit. No other damage noted. Should I be concerned ?
What are the signs of damaged subframe cross member?
That was ah really good video . Thanks
Well done and a very nice video.
@CarsNToys
3 жыл бұрын
Thank you very much!
Excellent! Professional, informative, and very helpful. Never hit like so fast in a KZread video before
@CarsNToys
4 жыл бұрын
Thank you! Appreciate the feedback.
First off loved your video, bro! Straightforward, precise, professional, and informative. I wish I had all the tools necessary to do the job. I have an almost exact situation. I bent the sub-frame on 2013 Acura TL AWD. Mechanic is qouting almost $5,000 with parts and labor. I’m going to get a second opinion. But can you tell me any X-factors I might consist or any problems/other things that might need to be replaced? Or is something like this usually fixed by just replacing the frame? I hydroplaned into a curb also. Any advice I appreciate it. Nice Acura by the way!!
@supersabrosinho
3 жыл бұрын
Man that sucks. Besides, the subframe you can replace motor mounts if they're in bad condition. The clutch if you have a 6MT, and the rear main seal are definitely things you'd want to replace while the subframe is out
How much it could cost to repair the cross members in Australia ? My car is Toyota Camry Ateva 2007. Mileage 134000 km. It’s having allignment issues. Fixed the wheel alignment.
I also hydroplaned into a curb. Would there be any difference between an 06 and an 07? Or have you only done this one TL ? I'd think from 04 to 08 the subframes would be identical besides the type S
@julianmichel5843
5 ай бұрын
04-06 auto and manual subframes are the same.
Could you please make another video on how to remove and install the rear sub frame thank you!
@kenfolstad1346
4 жыл бұрын
I would like to request the same, rear subframe .
Do you know the flat rate manual in hours? TY. Great video!
Do you mount the motor so it didn't fall
Great video!! Brand and model of floor jack please?
How much would a job like this cost? Got acura tl 2008 need a new subframe same side
@CarsNToys
5 жыл бұрын
Local mechanic quoted $4k for used parts.
Hey man great video! I’m just curious on how much do you think it’ll cost to replace a subframe at an auto shop?
@gilomiguel801
3 жыл бұрын
It’s around 300 bucks
Great video. Is a front crossmember considered a suspension or just a frame and structural body part?
@aayesher9400
Жыл бұрын
Structural. Usually, unless the cradle is shifted after a crash which can affect suspension settings and alignment
Great video, in addition to the front mount vacuum hose did you have to remove any hoses at the bottom of radiator?
Did u put a new one or did u rebuild it and what issues did ur car have before the replacement because my throttle body keeps going out
@CarsNToys
2 жыл бұрын
I purchased a used unit from an auto recycler / junk yard. The original crossmember cracked. (Hydroplaned into a curb.)
What is called the part at 6:08? Thanks
Amazing video. How long would you say it took you to remove everything? I think you are a great editor to get this process down to 10 mins., but I am curious to know how long it would have taken to remove the subframe without all the camera magic.
@brzo.
2 жыл бұрын
i'd guess a days or two worth of work depending on the car, how rusty and what time you start
@alindaayala4024
2 жыл бұрын
A very good video
was side out more than other ?
excellent video, could you tell me how I can get that tool that suspends the engine, or what is its name, thanks.
@CarsNToys
Жыл бұрын
Thank you. Here you go - amzn.to/34A3EXW
Smart guy.
Well it looks like someone else in the world had the same problem I did this winter when I curb shot my Toyota Solara. Fast forward 8 months after I got the replacement control arms I spy with my eye that the orientation of the bushings clockwise on the back hockey puck one is not correct. Also I found it is useless to buy a shop press unless you have the correct pressing blocks and receiving cups. I like how you use a breaker bar too instead of a ratchet to break loose high torqued fasteners. I don't understand those that just want to destroy their ratchets by pressing them to take off 150 ft lb fasteners. Finally, I guess I won't complain about the tight quarters I have to work in after seeing how narrow the place you are working in.
I need a video on how to remove the cradle on a 06 rendezous. Can anyone help
what is the name of tool you used in minutes 1:30?
@CarsNToys
4 жыл бұрын
Here you go: amzn.to/2tYjQ7p
On the rack. You just removed the 4 bolts that go to the subframe? And it's free?
You should do a detailed video on how to replace lower control arms.
@pyschokilla666
3 жыл бұрын
Those r easy its the same way of replacing the wheel hub
Where can I get that engine support bar? I can’t find that one anywhere
@timarend6051
2 жыл бұрын
I am having the same question, looked everywhere with no luck, I really want that one
I want to get the Service Manual Nissan Maxima 2010
Great job! Excellent video. Are you in business? Love for you to replace my subframe. Thanks again both videos part(1) and part(2).
How much does this typically cost? If I have all my parts but need to to adjust it cuz supposedly everything is loose and shifted stuff... they’re charging me 363 is that typical? Feel like I’m getting bamboozled because I’m a woman and also know nothing about cars.
@CarsNToys
4 жыл бұрын
$363 for the crossmember is just about right.
@FeedMeJuice
4 жыл бұрын
CarsNToys ok thank you!
Where do you live
I thought basic tools are only wrench and hammer...
lmao to me to pop my ball joint out i used a pry bar and started jumping on it 😭 gonna go buy me one of those tools now 💀
Without a lift that job is a ball buster. A helper makes things much easier, especially going back in.
@pellergin
3 жыл бұрын
Jacks, lots and lots of jacks.
Looks like a 90’s to early 2000’s Honda Civic?
@Slowcarfastbeans
4 жыл бұрын
Nvm, wasn’t even paying enough Em attention lol. Something about a 2006 Acura something something something.
crossmember can be so expensive depending on what vehicle...where I’m at (Marietta Ga)a lot of mechanics didn’t want to do that heavy work a lot of them turned away from my car that needed a crossmember and lower arm replacement 🤷🏾♂️.eventually I found a mechanic shop to go for the work💁🏿♂️
@djsonicc
4 жыл бұрын
sounds like a lot of incompetent mechanics, to be honest. its not that hard of a job
@ZartanXL
3 жыл бұрын
Just watching clips of this short video, shows its a very tedious job. Im guessing, the time isnt worth the money. A good mechanic takes the job vs money grabs but like a lot of things, GOOD mechanics are scarce.
Excellent video but can you cut the uneccessary overly loud music.
I could not believe my dad's "Mechanic" did not really know anything about cars. I got a unsafe feeling and watched these videos and then took it to a repair shop. They deemed the car unsafe to even drive!!! Please follow your gut feeling. I'm a woman and was told not to pay attention to the crackling noises and sudden jerking while driving . That it was just cosmetic. YEAH RIGHT!!!!! SUBFRAME AND CONTROL ARM COMPLETELY STRIPPED, COULD NOT BE BOLTED DOWN AND I STILL DROVE IT SLOWLY BACK HOME. SCAREY!!!!
Gundai 2001,matal pati pram change
You didn’t show how to disconnect the transmission line that’s Under the subframe
Just a hint of the make/model in the title would be nice.
Would have been nice if you said what vehicle in the thumbnail, they're not all the same
HFC
You don’t have to take off shock strut
@shlumpgod
2 жыл бұрын
Are you talking about 4:15 🤔?
Response to ad If I get the latest apple will you respect my privacy and keep my data private 🤔
What year Accord is this?
@CarsNToys
4 жыл бұрын
2006 Acura TL
I hi
First off loved your video, bro! Straightforward, precise, professional, and informative. I wish I had all the tools necessary to do the job. I have an almost exact situation. I bent the sub-frame on 2013 Acura TL AWD. Mechanic is qouting almost $5,000 with parts and labor. I’m going to get a second opinion. But can you tell me any X-factors I might consist or any problems/other things that might need to be replaced? Or is something like this usually fixed by just replacing the frame? I hydroplaned into a curb also. Any advice I appreciate it. Nice Acura by the way!!
@CarsNToys
4 жыл бұрын
Hi Jihad. Sorry to hear about the damage. What your mechanic is quoting seems to be just about right. Chances are they plan on replacing the knuckle, lower control arm, wheel bearing, tie rod and shock on the damage side; as they often bend. You may be able to save a bit going used rather than new, but that's your call. The crossmember in my case was a used unit I purchased for $450 ,including the sway bar. One thing I was certainly worried about was the steering box. Fortunately there was no damage but that is something that may come up as the mechanic dives in to the job. In the short term, my advice to you is don't drive the vehicle. I quickly go over what happened to me in this video....kzread.info/dash/bejne/q6Sj2KSqpM2bedI.html ….but long story short, the subframe failed while I was doing a k-turn in front of my house and I had to get tow truck to literally move the car 30 or so feet. Feel free to email me at carsntoys@gmail.com if you have any other questions. Good luck!
@jihaduthman4711
4 жыл бұрын
CarsNToys Thank you for replying. I hope I don’t have to change all that: but if it’s best to do it all at once, then that’s what I’ll do. 1 Question: the steering box, is that the same as the Power Steering Rod on a 2013 TL? Or is that a different part? Thanks again, CarsNToys
@CarsNToys
4 жыл бұрын
Glad to help. Yes, they can also be called Power Steering Rods. Hope your TL is up and running soon.