How To Replace A Broken Antenna In 10 Minutes
Автокөліктер мен көлік құралдары
How to replace a broken antenna mast. I completed this repair on my truck and it took less than 10 minutes. It was an easy repair that anybody could do.
You first have to remove the old antenna by removing the securing nut on the antenna mast. Remove the old broken antenna. Take the new antenna and push it as far down as you can before you feel resistance. Make sure the grooves are facing the same direction that the old antenna mast grooves were facing. If you don't know then you may have to do a little trial and error until you get it right. In my 1999 Toyota 4Runner I had to have the grooves facing backwards. Turn your radio off while the antenna is inside the housing. You may have to push the new antenna and move it around until the wind up mechanism catches the grooves. The new antenna should seat properly. Tighten the securing nut.
✅✅✅ - SUBSCRIBE
Subscribe: goo.gl/EScwor
Recent Upload: goo.gl/q32KFc
🎥🎥🎥 - PLAYLISTS
Toyota 4Runner Playlist: goo.gl/FjrRXp
BMW E36 Playlist: goo.gl/1yWbxH
Chevy Lumina Playlist: goo.gl/UTgibi
🔧🔧🔧 - TOOLS
Tools In This Video
Needle Nose Pliers:
🔧🔧🔧 - TOOLS
Other Useful Car Repair Items
Ratchet Screwdriver: amzn.to/2k4Psl6
Shop Towels: amzn.to/2ku8amT
Hand Cleaner Goop: amzn.to/2jqHJNg
Orange Hand Cleaner: amzn.to/2jg3ZpM
34 Piece Ratchet Set: amzn.to/2k1rLdm
Car Jack (BestSeller): amzn.to/2jqAcOo
Jack Stands: amzn.to/2jqOJd7
Torque Wrench: amzn.to/2jNBALe
---------------------------
AutOdometer was previously MCRC (My Car Repair Channel)
Disclaimer: Each video that is produced and published is intended to be educational. Tips and tricks will be offered for your viewership. The outcome of your car repair is solely your responsibility. Research and a good thought process should be completed before each repair.
Пікірлер: 60
Funny how such a niche video tutorial from years ago will keep getting traffic (ha) for years to come. This little tutorial was so clear, concise, and useful! It helped me replace the antenna on my '94 Chrysler Concorde with one that looked better, and works so much better than the one I destroyed in a car wash. Thank you!
@SimplyWaffle
Жыл бұрын
Omg I broke mine in a car wash aswell 😂😂I'm right there with ya buddy
Legend. Replaced the 100 series aerial in under 15 mins, no wheel off, no hassles. Many thanks
Thanks for posting this. Every other video I saw told you to remove the front wheel and all of the wheel well shrouds. Saved me hours!
I thank you immensely for the upload, made the procedure clear cut and easy to follow!!! I am ecstatic to have finally replaced this part!
You saved my ass i got a 1999 Infiniti g20 and i just snapped my antenna in the car wash very simple i thought it would be more difficult thanks alot 👌👍🙂
Thank you for the video. I broke my antenna in a car wash and I'm the least mechanical savvy. The video gave me the courage to fix the antenna on my own. It took me less than 10 minutes to swap out the antenna. Weirdly the grooves on 2001 4runner were facing the other direction. Thanks again.
thank you!! the antenna on my 02 4runner snapped at the car wash and i had no clue how to take it off lol
EXCELENTE! MUCHAS GRACIAS
Thank you I hope it helps me with my 92 Chevy van
Very helpful. Thanks
Thanks!
but how do you remove the old white toothed cable/strip????????????????????????? do you just pull it out while turning on the radio?
@ardwych4881
6 ай бұрын
Yep, it's pointless. Video needs to be removed, Autodometer.
Great video, on my 1997 4Runner the grooves were facing forward and it was able to catch and go all the way in after the radio was shut off. Thank you for posting.
Thank you!!
Worked great for an 03 Toyota Sequoia. Teeth forward
So helpful! Thank you for posting this video. Worked perfect for a day. Now it needs an assist to go up. Can someone explain why this is happening?
for isuzu trooper. even if the main switch is off there is still sound in the foot part if the antena. how could i cure it? any idez please
Hello my 4runner antenna broke a while ago. The antenna motor has stop working since too. What my problem do you know
i put mine on my 1993 honda accord and mine doesn’t close all the way but i don’t mind that. the thing that does bother me is it makes a noise when it goes down and up almost like a farting noise as if the cable is scratching. i put grease on the cable as well and still makes the noise
Is there a stock number for the replacement antenna?
Would this work on a 2004 Toyota Sequoia?
how to condemn antena power supply?
Could you link the website you purchased the antenna mast from? Would be greatly appreciated. Keep up the good work on your videos!
@AutOdometer
5 жыл бұрын
www.rockauto.com/ I think I got it from here or either EBay. Not sure what vehicle you have but Rock Auto should be pretty easy to follow.
@fredjimenez4208
4 жыл бұрын
Hi, I got mine from Amazon from site, Masts R Us part #A049. My antenna mast nylon grooves were facing forward on my 1997 4Runner.
@allenlink8032
3 жыл бұрын
Clearly stated in the video at the beginning. rockauto.com
@robertlachmayer7460
11 ай бұрын
I put mine in backwards then turned it around it work great. Thanks for video bro
Is it the same for a Honda Accord 1992?
@CorydonDude
2 жыл бұрын
I would assume so. I’m about to replace one on my 98 4Runner, but my 92 Accord has bad antenna too lol
How did you get the old cable out? I don’t see that in the video.
@michaelbezak5401
4 жыл бұрын
Eric Bray yea missed that part lol
@whiterol
4 жыл бұрын
Yeah he just skipped that part. The most important part.
@JohnnyTrulove
3 жыл бұрын
He just replaced the mast. The cable is attached to the base/motor and of course to the back of the stereo.
@ardwych4881
6 ай бұрын
Yep, it's pointless. Video needs to be removed, Autodometer.
@ardwych4881
6 ай бұрын
@@JohnnyTrulove - not the electrical cable - the centre feed plastic cable inside the mast. He omits that entirely.
How did that white cable hook up? I don’t get it lol
@davidzeiters2845
4 жыл бұрын
the grooves in the mast's cable are grabbed by the gear in the motor and pulled in. once in, it just is gripped by the gears.
@ardwych4881
6 ай бұрын
...and when the motor senses resistance - the mast is fully drawn in - it stops. Similarly it knows how long it should run to be fully extended. Good logic.
You should have worn some vinyl gloves bro...
My old antenna was snapped off. There is still a piece of metal stuck in the assembly that i cant seem to get out. Any idea on how to do it?
@djdjsggg2924
4 жыл бұрын
I have the same problem with my vehicle it is a 1993 grand Marquis. He said something about taking the wheel and wheel cover off. What was ur vehicle and we're u able to fix it?
@justinbond9914
4 жыл бұрын
Same thing with my 03 tundra how did u get piece of metal out
@nekokat54
3 жыл бұрын
I have the same problem with my nissan pathfinder, there's a little price of the antenna Corroded stuck inside the frame of it. I'm about to take it to a mechanic if I can't get it to come loose
@kentripley7606
Жыл бұрын
@@djdjsggg2924 It's not a "wheel cover" per se on the Toyota 3rd generation 4Runner. More aptly called "wheel well liner or flap". Other videos show the connectors just get pried out and snap back on when reattaching. Not sure what your Marquis has in there. Maybe just turn the steering wheel to the right or remove the wheel to get better access. Good luck!
Yeah this is the same for all models... dmb fk!
the most important part you left out was removing the wheel and plastic cover to see what you need to do under there
@ardwych4881
6 ай бұрын
Yep, it's pointless. Video needs to be removed, Autodometer.
Where’s the whined up
@ardwych4881
6 ай бұрын
to btx - it's automatic. The system knows how long to run the motor to fully extend the mast, or similar logic.
VIEWERS - READ THIS FIRST: Unfortunately this is only half a job. The presenter just feeds a new antenna and its attached flexible slotted cable into and existing motor-body and its feed-in pipe. There's no mention of getting the old broken stuff out - it's like ramming a musket-ball on top of an existing musket-ball, a cannonball into a loaded barrel - choose your own metaphor. Incomplete. MOVE ON.
I don't see this video very helpful you never show how to take out the old cable out? 10minutes my ass lol
@ardwych4881
6 ай бұрын
Yep, it's pointless. Video needs to be removed, Autodometer.
A good video author would respond to people's comments unless they copied this video.
This video is 3mins not 10mins…so no 😌