Thanks. Good Video. Haven't decided if I need to replace the winch/strap or just the strap. But either way I schooled on how to get it done.
@buckybucky12502 жыл бұрын
Thanks
@buckybucky12502 жыл бұрын
Very well done ! Thanjs
@TheWeekendAngler
2 жыл бұрын
You're welcome! Thank you for watching!
@telposh5 жыл бұрын
Great job mister!!
@vtxdaryl2 жыл бұрын
You might think about replacing the safety chain too. It looks like it has seen better days.
@richardmundo97092 жыл бұрын
Thx preaciat
@joekhan4922 жыл бұрын
Good video. Enjoyed watching
@franksmythe69692 жыл бұрын
The fact that you didn't use new nuts and bolts is triggering my OCD.
@BubbaBass7 жыл бұрын
Think mine is ok maybe needs a little hitwith the wire wheel and some new paint ...great diy bro👍
@kimterry64272 жыл бұрын
Why did you use the old screws instead of new ones?
@troy1284 Жыл бұрын
Mine doesnt have to bolt across and its not included but it has a really small thing
@samn53624 жыл бұрын
Would you be able to mount this in the bed of the truck and use it to lift semi tires into the bed?
@TheWeekendAngler
4 жыл бұрын
You probably could, but there are better options for that. A friend of mine used to have a lifting winch in the back of his truck bed that had a swing arm and a similar winch.
@ryanmcandrew18394 жыл бұрын
would you recommend unhooking the strap from the boat thus releasing any possible tension from the strap before you remove the bolts?
@TheWeekendAngler
4 жыл бұрын
Sorry, just saw this message. Yes, that would be a good idea to avoid any potential problems.
@joesmith-fi1sx6 жыл бұрын
My winch works but the part that locks it in place doesn't work anymore I bought a $30 one off amazon to replace the whole unit I woukd like to repair the existing but it doesn't seem like it repairable .
@TheWeekendAngler
6 жыл бұрын
joe smith once those locking cams start acting up I get nervous about the winch in general. That's why I replaced this one when I bought that boat.
@joesmith-fi1sx
6 жыл бұрын
The Weekend Angler Ok great to know , I bought one . Waiting on it to arrive . Its a Reese server 1200 lbs nylon strap for my light sea nymph aluminum 👍🏻
@TheWeekendAngler
6 жыл бұрын
joe smith that should work fine for your boat.
@TeamTnA44 Жыл бұрын
Mine is backwards like yours . I don't get it 😕
@joesmith-fi1sx6 жыл бұрын
👍🏻
@royroth53106 жыл бұрын
I NEED TO DO THAT ON MY BASS BOAT
@cowlumbus4 жыл бұрын
Cannot we just replace the cable with a strap?
@TheWeekendAngler
4 жыл бұрын
On some you can, on others you can't. In this particular case the old winch was unreliable.
@kaceeenglish93702 жыл бұрын
I put mine on backwards I think
@reneekellow18466 жыл бұрын
I tho boat had to be in water to do how keep boat on trailer
@TheWeekendAngler
6 жыл бұрын
Renee Kellow the trailer was kept level and the bunk boards were dry. The boat wasn't going anywhere even with the winch clip removed.
@reneekellow1846
6 жыл бұрын
The Weekend Angler ok thanks yeah we about to replace winch but we tho we had to take boat to the lake
@reneekellow1846
6 жыл бұрын
I forgot to tell u I have rollers
@TheWeekendAngler
6 жыл бұрын
Renee Kellow lower the tongue down a little so that the boat is sitting slightly nose down. It will stay on. If you're worried about it though, you can go to the lake. It doesn't take long to replace the winch.
@reneekellow1846
6 жыл бұрын
Yes thanks we did it love ur videos
@marlenemwa3 жыл бұрын
Great video, but maybe stop saying, "Guys"? Women are the ones who search for directions. ;)
@TheWeekendAngler
3 жыл бұрын
Thanks for watching, but I will continue to say guys. It's not intended to be gender specific.
Пікірлер: 35
Thanks. Good Video. Haven't decided if I need to replace the winch/strap or just the strap. But either way I schooled on how to get it done.
Thanks
Very well done ! Thanjs
@TheWeekendAngler
2 жыл бұрын
You're welcome! Thank you for watching!
Great job mister!!
You might think about replacing the safety chain too. It looks like it has seen better days.
Thx preaciat
Good video. Enjoyed watching
The fact that you didn't use new nuts and bolts is triggering my OCD.
Think mine is ok maybe needs a little hitwith the wire wheel and some new paint ...great diy bro👍
Why did you use the old screws instead of new ones?
Mine doesnt have to bolt across and its not included but it has a really small thing
Would you be able to mount this in the bed of the truck and use it to lift semi tires into the bed?
@TheWeekendAngler
4 жыл бұрын
You probably could, but there are better options for that. A friend of mine used to have a lifting winch in the back of his truck bed that had a swing arm and a similar winch.
would you recommend unhooking the strap from the boat thus releasing any possible tension from the strap before you remove the bolts?
@TheWeekendAngler
4 жыл бұрын
Sorry, just saw this message. Yes, that would be a good idea to avoid any potential problems.
My winch works but the part that locks it in place doesn't work anymore I bought a $30 one off amazon to replace the whole unit I woukd like to repair the existing but it doesn't seem like it repairable .
@TheWeekendAngler
6 жыл бұрын
joe smith once those locking cams start acting up I get nervous about the winch in general. That's why I replaced this one when I bought that boat.
@joesmith-fi1sx
6 жыл бұрын
The Weekend Angler Ok great to know , I bought one . Waiting on it to arrive . Its a Reese server 1200 lbs nylon strap for my light sea nymph aluminum 👍🏻
@TheWeekendAngler
6 жыл бұрын
joe smith that should work fine for your boat.
Mine is backwards like yours . I don't get it 😕
👍🏻
I NEED TO DO THAT ON MY BASS BOAT
Cannot we just replace the cable with a strap?
@TheWeekendAngler
4 жыл бұрын
On some you can, on others you can't. In this particular case the old winch was unreliable.
I put mine on backwards I think
I tho boat had to be in water to do how keep boat on trailer
@TheWeekendAngler
6 жыл бұрын
Renee Kellow the trailer was kept level and the bunk boards were dry. The boat wasn't going anywhere even with the winch clip removed.
@reneekellow1846
6 жыл бұрын
The Weekend Angler ok thanks yeah we about to replace winch but we tho we had to take boat to the lake
@reneekellow1846
6 жыл бұрын
I forgot to tell u I have rollers
@TheWeekendAngler
6 жыл бұрын
Renee Kellow lower the tongue down a little so that the boat is sitting slightly nose down. It will stay on. If you're worried about it though, you can go to the lake. It doesn't take long to replace the winch.
@reneekellow1846
6 жыл бұрын
Yes thanks we did it love ur videos
Great video, but maybe stop saying, "Guys"? Women are the ones who search for directions. ;)
@TheWeekendAngler
3 жыл бұрын
Thanks for watching, but I will continue to say guys. It's not intended to be gender specific.